13 development and production test engineer jobs found in Stevenage

Job Title: Development and Production Test Engineer Location: Stevenage (Onsite) Rate: £26-£36 per hour Umbrella Duration: 12months Key skills: Development / Production / Test / Electronics / RF / Microwave Technology / High Voltage / CADMID Clearance: SC is required for this opportunity We are seeking an experienced Development and Production Test Engineer to join our team in Stevenage. This onsite role offers a dynamic and challenging environment where you'll contribute to the testing and development of advanced technology systems. Key Responsibilities: Provide technical support for the manufacturing testing of weapon subsystems, including both production and development stages. Diagnose and troubleshoot complex weapon systems at both the system and subsystem levels. Offer Test Engineering support during the Design and Development phases, from initial concept through to Production Readiness Review and Operations release. Ensure test facility introduction and maintain...

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Development and Production Test Engineer - Electronic / Electrical subcontractor on an initial 6 month contract. Experience specifically required: Must have significant experience with measurement and test principles, and associated test equipment. Electronic Component level fault finding CADMID product lifecycle for test equipment is desirable. RF and microwave technology at subsystem level would be an advantage. Environmental testing would also be an advantage. High Voltage training/awareness. SAP Beneficial The department are keen to hear from candidates from a background with either RF / Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £36.00ph (Umbrella) Contract Duration: 6 Months (initially and then ongoing and long-term thereafter) Development and Production Test Engineer - Electronic / Electrical Job...

A Development and Production Test Engineer - Electronic/Electrical is required for a long term contract assignment on site in Stevenage. Overview of department: Manufacturing department Based in manufacturing Role responsibilities Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. * Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. * Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. * Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. * Identification of remedial and corrective...

On behalf of our client, we are seeking to recruit a Development and Production Test Engineer on an initial 12-month contract. As the Development and Production Test Engineer you will provide technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Role: Development and Production Test Engineer Pay: £32 - £36 per hour Via Umbrella Location: Stevenage Contract: Monday - Friday 37 hours per week, 12 months IR35 Status: Inside Security Clearance: SC Required, UK Eyes only Responsibilities Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Support to testing of...

Role responsibilities Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level. Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme. Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions,...

World Class Defence Organisation based in Stevenage, Hertfordshire (hybrid of Working From Home and Onsite) is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Hourly Rate: £60ph Contract Duration: 12 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data...

Our client has an opportunity for an Electrical Architect to join them on an initial 12-month contract. You will be involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Role: Electrical/Electronic Engineer - Electrical Architect Location: Stevenage - Blended approach combining working from home with working onsite at Stevenage as required to meet business needs of the project. Clearance: Full SC required to start Hourly Rate: Up to £60 per hour via Umbrella, inside IR35 What you'll be doing: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power...

Electrical/Electronic Engineer - Elec Architect Overview of department: Missile Architecture - Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It's an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: a) Specifying/determining * system electrical requirements * interface definitions and characteristics between subsystems/equipment * power architecture, including power budget and power profiles * data communication and processing architecture * requirements for EMC, bonding, grounding and screening * signal safety, including routing of safety related signals b) Supporting test and fault-finding activities during compatibility checks, risk reduction, system...

MERITUS are recruiting for a Production Test Engineer to join our defence client in Stevenage on an initial 12 month contract. PRODUCTION TEST ENGINEER - INSIDE IR35 - £36 PER HOUR - UNDERGO SC CLEARANCE - STEVENAGE - 12 MONTHS - SINGLE STAGE INTERVIEW PROCESS Role Responsibilities: Provide technical support for manufacturing tests of weapon sub-systems, covering both production and development phases at the system and subsystem levels. Offer Test Engineering support throughout the Design and Development stages, starting from the initial concept to the Production Readiness Review and transition to Operations. Facilitate the introduction of Test Facilities, ensuring the configuration control of equipment and facilities is established before use, which includes creating test specifications and operator instructions. Conduct testing of electrical/electronic weapon systems and sub-assemblies, diagnosing production test failures down to the circuit card and component levels. Quickly...

Electrical/Electronic Engineer – Elec Architect Location:            Stevenage (hybrid working arrangement) Duration:           12 months Rate:                 £60 per hour Umbrella You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining: system electrical requirements. interface definitions and characteristics between subsystems/equipment. power architecture, including power budget and power profiles. data communication and processing architecture. requirements for EMC, bonding, grounding and screening. signal safety, including routing of safety related signals. Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration. Reviewing and authoring reports, guidelines and processes. Design assessments and analysis. Working to defence/industry standards. Attending and supporting design...

Expleo are recruiting on behalf of our client, a successful Automotive OEM, for an Automotive Instrument Cluster Engineer. The role is based in Bedfordshire and is offered on an annual contract basis. The successful Instrument Cluster Engineer will be working within the Research and Development team responsible for the Instrument Cluster, Head-Up Displays and Displays development. Responsibilities of the Instrument Cluster Engineer include: * Lead design reviews to ensure parts under development are delivered on time, to cost and quality * Development of Instrument Cluster, Head-Up Displays and Displays to meet Design and Test standards * Maintain part BOM across European vehicles * Prepare functional specifications * Review and approve part drawings submitted by suppliers * Resolve technical issues with test departments and suppliers * Conduct vehicle life cycle cost reduction idea generation and implement * Lead vehicle life cycle warranty investigations...

Recruit Central are recruiting for a Proving Test EV Technician based in Peterborough. This role is an Opportunity to work on new technology that is new to the business, If you have the core understanding of EV's systems and hands on experience this role could be for you. Job Responsibilities and Duties: Adhere to the Organisation's health and safety policy and safe working practices in accordance with the Safety Management System Adhere to our Values in Action: Integrity, Commitment, Excellence, Teamwork & Sustainability Follow documented standard work procedures/instructions to perform safe and defect free assembly of parts and components, using various hand, power tools and lifting equipment provided in the work area.  Follow and work to Engineer’s instructions to install prototype, pilot, and production powertrains into machines - Operate a multitude of different off-highway vehicles including but not limited to, Hydraulic Excavators, Back-hoe Loaders,...

Are you an experienced CAD Designer, experienced in 2D/3D drawing packages, seeking a new opporunity with our client's leading engineering and maintenance provider? Can you demonstrate experience of all phases of the project lifecycle, including an understanding of all electrical safety principles? If the answer is yes, this could be a fantastic opporunity for you so read on and get in touch now to avoid missing out! The Opportunity Due to increased project expansion, our client is currently seeking experienced 2D and 3D CAD designers to work on a major project in the Reading Area. This is a Contract position with an estimated duration of 6 months + This role has been deemed outside of IR35. Your duties and responsibilities will be * As a 2D/3D CAD Designer, you will be responsible for the production of 2D/3D drawings in line with programme and in strict adherence to customers specification and standards. * Ensure project scope is satisfied efficiently and effectively. *...