35 steel fitter jobs found

The Solution Group are currently looking for a number of Site Fitters to start in Bedfordshire. You will be working with secondary steelwork. Must have CSCS Card For more information please call Sam Leeson on (phone number removed)

The Solution Group are currently lookign for a number of Fitters mates to start in Slough. You will be working on a major construction project. Must have CSCS card and steelwork expereince. For more information please call Sam Leeson on (phone number removed)

Job Title: Panel Wirer/ Electrical Assembler Location: Barton Under Needwood, Staffordshire Duration: Ongoing Hours: 7am-3.30pm Mon to Thurs, 7am-12pm Fri Our Engineering client are recruiting for a number of experienced Panel Wirers for a min of 3 months. Own Transport is essential due to site location Job Purpose: The role of the Panel wirer / Assembly fitter is to ensure that all items are manufactured in accordance with current drawing/instruction to a high standard. Key Responsibilities & Activities * Build new and modify existing steel racking in preparation for the project. * Strip out and remove existing circuit boards/PCB's from historical frame work. * Install pre-purchased equipment and circuit boards into an electrical rack using technical drawings. * Work with engineering to produce wiring harnesses for the first few units. * Hard wire electronics racks initially from technical drawings. Future state: installing prebuild wire harnesses. * Soldering *...

We are seeking a Fitter for a manufacturing company, offering an excellent opportunity for someone with strong practical skills to work on specialist builds. Key Responsibilities: Carry out mechanical and structural fitting on a range of vehicles, including interior and exterior builds and refurbishments. Work with materials such as wood, aluminium, and steel to assemble, fit, and modify vehicle components. Read and interpret engineering drawings and build instructions to complete fitting tasks to specification. Use a wide range of hand and power tools, including drills, saws, pipe grips, Allen keys, spanners, screwdrivers, and grinders. Perform accurate measurements, cutting, and fitting to ensure a high-quality finish on every build. Key Requirements: Experience in one of the following: Vehicle fitting, mechanical assembly, or fabrication work Coach building, bodywork, or interior vehicle fitting Workshop or joinery environments, working with wood, metal, and...

TIG Welder / Fitter Didcot £17.00 per hour Our well-established client is currently looking to hire a skilled Welder/Fitter on a permanent basis. This is a fantastic opportunity to join a respected company that offers a stable work environment, competitive benefits, and opportunities for long-term development. TIG Welder Fitter Roles and Responsibilities: * Perform TIG welding on pipework, primarily using stainless steel * Collaborate effectively with a team of experienced welder fitters * Manufacture vacuum-insulated pipework to precise specifications * Carry out installation work as required, both on-site and off-site * Work with a variety of metals, particularly stainless steel * Accurately read and interpret engineering drawings and technical schematics TIG Welder / Fitter Ideal Candidate: * Proven TIG welding experience, specifically on pipework * Confident in reading and interpreting detailed engineering drawings * Be a coded welder -...

Skilled Welder/Fitter Permanent Opportunity  Location: Corbty Salary: £50,000 Working hours: 6am till 4.30pm - Monday to Friday Commutable from Kettering, Wellingborough, Northampton & surrounding areas Job description Our client is looking for a highly skilled and experienced Welder/Fitter.  The Role - Welder / Fitter: fabricate / weld - MIG & TIG, stainless steel and  mild steel welding as well as fitting & installing on site To fabricate medium-gauge metal components up to 10mm Working from engineering drawings Working independently and as part of a team   Minimum Skills / Experience Required -Welder / Fitter: Have a good engineering background with the ability to read and interpret engineering drawings       Experience in site welding and fitting Ability to work with all types of metal up to 10mm Must have good attention to detail Be able to finish a product to a very high standard Be punctual and a good timekeeper  Be confident, organised, and...

Job Title: Panel Wirer/ Electrical Assembler Location: Barton Under Needwood, Staffordshire Duration: Ongoing Hours: 7am-3.30pm Mon to Thurs, 7am-12pm Fri Our Engineering client are recruiting for a number of experienced Panel Wirers, for a min of 6 months. Immediate starts Own Transport is essential due to site location. Job Purpose: The role of the Panel wirer / Assembly fitter is to ensure that all items are manufactured in accordance with current drawing/instruction to a high standard. Key Responsibilities & Activities * Build new and modify existing steel racking in preparation for the project. * Strip out and remove existing circuit boards/PCB's from historical frame work. * Install pre-purchased equipment and circuit boards into an electrical rack using technical drawings. * Work with engineering to produce wiring harnesses for the first few units. * Hard wire electronics racks initially from technical drawings. Future state: installing prebuild wire harnesses....

Overview 18 Recruitment are a specialist recruitment company who supply welders, pipefitters, and fabricators. The Role We are seeking a skilled Pipe Welder to join a well established engineering company in Stalybridge You will be working either at our fully equipped workshop in Stalybridge or on various client sites across the North West What We’re Looking For * You must of done TIG welding on pipework. * Ability to produce high-quality welds on both hygienic and schedule pipework is essential. * All candidates must of worked on Stainless Steel and Carbon Steel. * A valid Level 3 welding/fabrication qualification or completed apprenticeship is preferred. * We are looking for reliable, versatile individuals who take pride in their work. Additional Information CIS Please contact Alex if available

Our Client, a large engineering company are looking for experienced pipefitters to work in and around Manchester. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Candidates must be comfortable tacking your own pipework in TIG. Must be comfortable with using pipe bending and threading machines and being able to read from isometric drawings. Must have CSCS or CCNS & be able to test out in the Liverpool workshop. Rates are: £25 basic / £35 after 8 hours / £45 weekend If your interested in the role please send your CV in

Our Client, a large engineering company are looking for experienced pipefitters to work in and around the Liverpool area. Must be comfortable with ABS Pipework and stainless and carbon steel pipework fabrication. Must be comfortable with using pipe bending and threading machines and being able to read from isometric drawings. Must have CSCS or CCNS & be able to test out in the Liverpool workshop. Rates are: £25 basic / £35 after 8 hours / £45 weekend If your interested in the role please send your CV in

Job Overview We are currently seeking an experienced Duct Fitting Pair for a short-term project in Cambridge, working on the installation of spiral ductwork in a commercial/industrial setting. The role involves working with galvanized steel ducting systems to a high standard, following site drawings and health & safety protocols. Key Responsibilities * Installation of spiral ductwork (galvanised steel) * Supporting framework/brackets as required * Reading and interpreting technical drawings * Ensuring installations are airtight and meet specifications * Maintaining site cleanliness and safety standards * Coordinating with site supervisors and other trades Requirements * Valid CSCS/Skill Card (Blue/Gold) * Proven experience working as a Duct Fitting Pair * Own tools and PPE * At least one fitter in the pair must be capable of reading and following drawings independently * Must...

Job Overview We are currently seeking an experienced Duct Fitting Pair for a short-term project in Derby, working on the installation of spiral ductwork in a commercial/industrial setting. The role involves working with galvanized steel ducting systems to a high standard, following site drawings and health & safety protocols. Key Responsibilities * Installation of spiral ductwork (galvanised steel) * Supporting framework/brackets as required * Reading and interpreting technical drawings * Ensuring installations are airtight and meet specifications * Maintaining site cleanliness and safety standards * Coordinating with site supervisors and other trades Requirements * Valid CSCS/Skill Card (Blue/Gold) * Proven experience working as a Duct Fitting Pair * Own tools and PPE * At least one fitter in the pair must be capable of reading and following drawings independently * Must have...

Force Recruitment are currently looking for an experienced Steel Fixer to join our team on a project lasting 4–5 weeks. Location: Bicker Fen Substation, Lincolnshire Rate: £270 – £300 per shift (dependent on experience) Duration: 4–5 weeks Start: ASAP Requirements: * Valid NG Persons Ticket – essential * Proven experience in steel fixing * Reliable, hard-working, and safety-conscious If this role is of interest to you please provide an up to date CV to the email below or get in touch with contact shown below. Kind Regards

Danny Sullivan Group are currently looking for Steel Fixers to work as part of our team in Devonport. The Role -  10 hours per shift, Monday – Friday Long term work on Devonport Dockyard Rate £22.07 Increasing to £33.11 after 39 hours worked weekly Good experience and understanding of steel fixing.  Requirements - Valid CSCS Blue Steel Fixer ticket Experience in Steel Fixing.  Right to Work in the UK Benefits - PPE Weekly payroll services Overtime potential Travel/Lodge/Holiday Allowance Free access to qualifications/certifications to upskill in your trade, as part of DSG Academy  If you’re interested in this position, apply or alternatively please call Jesse on (phone number removed) or (phone number removed).   Danny Sullivan Group are an award-winning family business who have been operating in the UK infrastructure sector for over 36 years and are now one of the leading suppliers of skilled, professional labour to the civil engineering, rail, transportation, and construction...

We are recruiting Van Drivers for our client based in Avonmouth (BS11), who are a large independent aluminium and stainless steel stockholder. As part of their transport team, your main duties will include the delivery of aluminium and stainless steel products to builder’s merchants, warehouses and construction sites across the UK in their 3.5t flat-bed vehicle. This role can involve both deliveries and collections, usually up and down the M5 corridor - so straight forward work. Ideally we look for drivers with at least 6 months recent commercial van driving experience. This is a temporary contract, so our work can be flexible. This means we can cater for drivers who are looking for either ad-hoc or full-time hours each week, on a regular on-going basis. Start times are 06:00am, Monday to Friday, with a pay rate of £13.00 per hour (PAYE). Benefits of working with ANCORA: • 28 days annual leave per annum (inclusive of statutory holidays, PAYE only) • Weekly pay and online...

CNC Brake Press Setter/Operator     Due to a full order book our client based near Stamford, currently has immediate long-term roles for a competent Press Brake Operative to join their team.       Responsibilities     Set and operate Brake press/Punch Press      Cutting and folding steel and associated sheet metal duties      Complete all required safety procedures.      Able to finish a product to a very high standard     Requirements       Press Brake Setting and operating experience      The ability to interpret engineering drawings and select correct tooling.      Used to working to tight tolerances & carry out visual inspection       Hours and Pay 38 hours per week      Working Hours Monday to Thursday 7:30 to 4:30pm 30 mins lunch. Friday 7:30am to 11:30am      Salary up to £17/hour DOE      Overtime @ 1.33 for the first 4 hrs @ 1.5 after.    Quaterly bonus – up to £600   36 days holiday per annum

Exciting Opportunity: Production Operative Are you ready to join an industry-leading company that stands at the forefront of innovation, quality, and efficiency? With over 90 years of experience, this company is a pioneer in providing high-strength, lightweight, and fatigue-resistant products made from the world's most advanced composite materials. They are currently seeking a dedicated Production Operative to become an integral part of their dynamic team. This role offers the chance to work on projects that make a real difference, in an environment that fosters growth, learning, and excellence. What You Will Do: Handle raw materials, ensuring their proper delivery and setup for work streams. Accurately place cut material shapes into various tools including preform, moulding vac form, composite, and steel tooling. Safely load tools, laminates, and preforms into compression presses, ovens, or autoclaves. Carry out finishing and assembly of composite components. Manage the packing...

Department: Production Job Title: Coachbuilder Reporting to: Stage 6 Production Manager Working Hours: Days - 7.30am to 4.30pm Monday - Friday (with a 30-minute unpaid lunch each day) with a 3.30pm finish on a Friday. Nights - 7.45pm to 6.00am Monday - Thursday and (with a 30 minute unpaid lunch each day). Key Objectives: You will be working in either our specialist bodybuilding team or on a production line. You will be responsible for assisting in producing a finished trailer or vehicle body to a high level of quality. You will be working with various materials including hardwoods, fiberglass, steel, and aluminium and working from technical drawings. A high level of skill is required to perform various tasks including assembly of parts, drilling, cutting, riveting, welding, and grinding. Responsibilities include: Following technical drawings and specification sheets. Must be able to work individually or as part of a team to meet production targets. Following clear...

Morson are recruiting a number of skilled Mechanical Assembly Technicians to work on an initial 6-month contract with our client Marshall Land Systems in Cambridge The Mechanical Assembly Technician plays a pivotal part in high-profile military projects, dealing with the production of both vehicles and containers, and your ideas and contribution will be valued in a business where people really matter Rates: PAYE: £19.69/hour (+£3.06/hour holiday pay)   Overtime (after 37 hours & Saturdays) £29.54/hour, Sundays £39.38/hour UMBRELLA £27.09 per hour Overtime (after 37 hours & Saturdays) £40.64/hour, Sundays £54.04/hour Candidates from the below backgrounds/disciplines would be suitable: Coach builders Kitchen fitters Sheet metal workers / fabricators Joiners Shop fitters Specialist vehicle builders who have worked on installations of commercial vehicle installations Duties include but are not limited to the following: To manufacture, assemble and build specialist...

MTrec’s new career opportunity We are recruiting for our market leading client who are looking for a CNC Machinist- Fanuc Lathe. This permanent position offers the opportunity to work for one of the region’s employers of choice. Initially a temporary position this role has the potential to become permanent. The Role * As a CNC Machine Setter Operator, you will be required to set and operate CNC machines to produce a range of components from a variety of raw materials including stainless steel and aluminium, ensuring all components conform to the engineering drawings. * Perform efficient setting and operating of the CNC machines, achieving or improving upon planned standard times and quality levels through program improvements. * Interpret engineering drawings to ensure optimal programs are created and products are produced as effectively as possible to the required quality standards. * Use a range of measuring equipment together with working knowledge of inspection...