41 test planner jobs found

Russell Taylor Group is currently seeking an experienced Groundworker for a project in Blackpool FY1 3-4 months work This will mostly be finishing works - ducting and paving Rate of pay is £19.50-£20ph depending on tickets and experience (CIS or umbrella) You must hold a valid CSCS card and be able to provide recent groundworks references. If you are available and interested, please apply online with an up to date CV. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

A Senior Civil Technician will lead various phases of planning, proposal preparation, site evaluations, analytical 3d model designs and preparation of construction documentation as part of a project team. Be responsible for producing high-quality civil engineering designs and drawings, primarily using Autodesk Civil 3D software. This position will lead various projects and collaborate closely with engineers, project managers, and other team members to deliver accurate, efficient, and timely design solutions. • Lead, assist and prepare detailed civil engineering drawings and design using Autodesk Civil 3D with various civil project designs including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, pressurised mains for mission critical facilities. • Lead drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and...

Document Controller Working between the Derby office and sites in the East and West Midlands Rate Negotiable Linsco are currently recruiting for an experienced Document Controller to join a busy construction company. The successful applicant will be based within the site cabins, therefore previous experience working in a site-based construction environment is essential. Flexible working hours are available, Monday to Friday. Key Responsibilities: Managing and maintaining site documentation Document control and administration Acting as front of house within the site cabins Supporting the site team with general administrative duties Ensuring accurate filing and tracking of all project documents Requirements: Extensive experience as a Document Controller Proven experience working within a site-based environment Strong IT skills and system knowledge Confident and professional front-of-house manner Excellent organisational and administrative skills Must have experience...

Site Facilities Maintenance Technician (M&E) We are seeking a highly skilled and versatile Site Facilities Maintenance Technician with a strong Mechanical and Electrical (M&E) background to join a global leader in FMCG manufacturing. Based at a major production facility in Trafford Park, Manchester, this 12-month contract offers the opportunity to work within a fast-paced, high-volume manufacturing environment. Role Overview Pay Rate: £22.18 per hour (CIS). Hours: 40 hours per week. Contract Type: 12-month temporary contract. Location: Trafford Park, Manchester. Industry: FMCG Manufacturing. Key Responsibilities Integrated Maintenance: Execute both mechanical and electrical planned preventative maintenance (PPM) and reactive repairs to ensure zero downtime on critical production and facility plant. Mechanical Systems: Inspect and repair pumps, gearboxes, conveyors, and pneumatic systems essential to the manufacturing process. Electrical Infrastructure: Perform...

Experienced CSCS Labourer / Skilled Labourer required for a project in Lancaster (LA1). Mths of work and an immediate start available. You'll be responsible for general labouring and working with site Joiners - ability to use basic hand tools is essential. Pay - £16ph CIS If you are interested / available, please apply online for a call back to discuss the contract. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Telescopic FLD- Seaton O'Neill & Brennan are looking for a Telescopic Forklift Driver on a busy construction site in Seaton Applicants MUST have a valid BLUE/Red CPCS CARD or NPORS. You will be required to: Telescopic duties: Driving the Telescopic Forklift within the confines of the Site Traffic Management Plan. Load and unload materials, goods etc from lorries or platforms and transport them both internally and externally Assist with getting plots ready for handover. Responsible for minor maintenance checks on the plant. Checking oil, tyre pressures and fuel. Responsible for securing the plant at the end of the day. Benefits: Paid weekly every Friday £50 Voucher - O&B Referral Scheme, ask for more details. Long term work for successful candidate. Further training and upskilling available To be successful the candidate must have: CPCS or NPORS PPE (This can be provided if required) Proof of Right to Work in the UK If you're interested in this position, please call...

FLT Driver / Labourer (Rough Terrain) We are currently seeking an experienced FLT Driver / Labourer to join our team on a solar farm project based in Castleford. Role Responsibilities: Operating a rough terrain forklift safely and efficiently Supporting general labouring duties on site Maintaining a clean, safe, and organised working environment Job Details: Location: Castleford Duration: 2 months Rate: £18 per hour Hours: 4550 hours per week Requirements: Valid CSCS card Rough terrain FLT licence (essential) Previous site experience preferred If you meet the above criteria and are available, please get in touch to apply or learn more Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your...

Building a sustainable tomorrow BAM UK & Ireland are recruiting a site based Fabric Engineer to join our FM Segment of the business and to be based in Castle Donington. Working 40 hours per week between the hours of 8.00am - 5.00pm Monday to Friday. This is a 12 Month Fixed Term Contract. Making Possible In conjunction with common roles the fabric engineer will have full responsibility for the Building fabric status of the site and carry out planned maintenance (PPM) and reactive maintenance tasks as they occur across the site. • Knowledge and experience with building fault finding • Carry out ceiling repair, painting, skirting and facing replacement, door servicing etc. • Identify spare parts to carry out repairs and order through appropriate channels. • Ability to inspect and carryout reactive landscape maintenance tasks in accordance with the project agreement including litter picking. • Carry out building fabric inspections • Inspection and fault finding building...

Russell Taylor is currently seeking experienced Plumbers to assist on a project in the WC2A of London. Please click apply if you are interested in this position, Job Types: Full-time, Temporary Licence/Certification: JIB or CSCS card with relevant qualifications (preferred) Own tools and PPE Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Plater/Fabricator - Weekend Shift £150 trade test payment if you pass and start on assignment with us! We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Night £24.10 per hour OT 1.5 £28.47 OT 2.0 £37.96 Weekend shift pattern which rotates: Week 1 - 7pm-7am Friday, Saturday and Sunday Week 2 - 10.15pm - 7am Friday, 7pm - 7am Saturday and Sunday. Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of...

Grounds Maintenance Operative Opus People Solutions are looking for an experienced driver for the Grounds Maintenance Operative role available within Walsall Council. You will be required to start your day at the Depot in Brownhills starting at 6.15am, then work out in the community. Salary: £13.69 per hour (temporary role) Hours: 37 hours over 4 days, starting at 6:30 am, arrival time is 6.15am. You will receive your shifts for the week on Friday's. Location: Brownhills, Clean & Green Environmental Depot, WS8 7EN. Duration: End of September and then potential to be booked in when required or work on Waste Collection Operative role. Valid UK Driving Licence is required for this role, applicants with more than 3 points on their licence cannot be considered. Responsibilities (not limited to): Grounds maintenance, horticulture and parks services Vegetation control (PA1/PA6) - herbicide treatment - If qualified Graffiti removal Floral displays and planters Sports...

Russell Taylor Group is currently seeking experienced Labourers for a project in Liverpool L3. Rate of pay is £22ph CIS or umbrella Blue or Gold CSCS card required. This is a shop fitout expected to last until July. You must hold a valid CSCS card and be able to provide previous references If you are available and interested, please apply online with an up to date CV. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Plater/Fabricator - Weekend Shift £150 trade test payment if you pass and start on assignment with us! Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Night £24.10 per hour OT 1.5 £28.47 OT 2.0 £37.96 Weekend shift pattern which rotates: Week 1 - 7pm-7am Friday, Saturday and Sunday Week 2 - 10.15pm - 7am Friday, 7pm - 7am Saturday and Sunday. We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of Fabrication...

FIre Alarm Engineer – Sub-Contractor Location: Calderdale Council Area (Halifax & Bradford) Start Date: Beginning of May Rate: £280 – £330 per day  We are seeking an experienced Fire alarm Service Engineer operating on a subcontract (CIS) basis to support a maintenance contract across council-owned buildings within the Calderdale region, including Halifax and Bradford. Work will be carried out across a variety of sites, including social housing, offices, and public buildings. This role suits an engineer who can work independently and is confident across multiple fire alarm systems. Key Responsibilities Carry out planned preventative maintenance (PPM) on fire alarm systems Service, fault-find, and repair fire alarm systems Ensure compliance with relevant standards and regulations Complete service reports and documentation accurately Liaise with on-site contacts, including council staff and building managers Work safely within occupied buildingsRequirements Proven...

Temporary, 6 Months FTC – Full Time, 40 hours per week. We are looking to recruit a Damp and Mould operative with Painting and Decorating qualifications on our Westminster Contract, based from our office at Goldney Road, W9 2AR About the Role Working to deliver the best quality service, you’ll carrying out emergency, responsive and planned mould treatments as well as painting and decorating to both occupied and void properties, to include mould treatments, glossing, emulsion, and papering. You’ll ensure effective preparation techniques, producing “prefect” finishes to all applications, whilst delivering exceptional customer services, ensuring our customers always come first. You’ll receive and complete assigned tasks using a handheld device (full training), working efficiently and safety in line with best practise to achieve excellent customer experience. About You Candidates will hold a relevant trade City and Guilds qualification, C&G Craft or Level 2 in relevant trade or...

Your new company a well-established, purpose‑driven charity to recruit an experienced Building Manager on a 12-month contract based in London. This is a high‑impact role combining strategic workplace planning with hands‑on facilities and health & safety management, ideal for someone who enjoys shaping how people work while ensuring a safe, well‑run environment. Your new role Reporting into the People & Culture function, the Building Manager will play a pivotal role in both the day‑to‑day operation of the London office and in shaping its future use. Key responsibilities include: Leading analysis and recommendations on the best strategic and commercial use of the London office (including sale, rental or alternative options) Engaging internal stakeholders to define future office, hybrid and remote working needs Managing the smooth operation of the building, including maintenance, utilities, security and suppliers Acting as primary keyholder, including early opening of the...

Electrical Project Manager Newmarket 2 Year Contract 1st Step Solutions are supporting a well established Tier 1 M&E Contractor who have an opportunity for an Electrical Project Manager to be based on a new commercial project in Newmarket. To be successful in this role, you will have a proven track record in project management, particularly within the pharmaceutical/commercial sector or similar related projects with values up to £20 million. Ideally, you will have experience of demonstrating responsibility for full Contract Management at this level. Job Purpose: Reporting to the Project Director, the role will require the successful candidate to provide direction and leadership to the delivery team. Taking responsibility for the delivery of excellent operational performance and managing both directly employed and subcontracted resources, ensuring they are managed and motivated to deliver cost effective, and high quality customer focused outputs. Responsibilities: · The...

Mechanical QA Supervisor/Manager West London Contract 1st Step Solutions are currently recruiting for an experienced Mechanical QA Finishing Manager to be based on a commercial project in West London. Quality Control Duties: - Inspect completed work to ensure quality and adherence to design. - Complete QA documentation including mark ups, snag sheets and installation checklists. Compile with sub-contractors QA and issue to main contractor for inspection. - Ensure close out of any client and consultant snags in a timely manner. - Maintain accurate records of work progress, inspections, and testing activities. - Prepare reports on MEP performance, issues, and corrective actions. - Support commissioning, testing, and handover documentation. Qualifications/Skills: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - Good literacy skills. - Previous experience in a Mechanical QA Supervisory/Management role. - Previous experience of working...

Our client is a mechanical and electrical contractor delivering design, installation and maintenance engineering services. We primarily work in the commercial, education and residential sectors. We continually strive to improve and apply technological solutions within the built environment. We are an expanding business with a desire to maintain quality. We are currently seeking a Project Manager to join the team, manage the delivery of our projects and develop our processes and colleagues. Projects are increasing up to c.£2m in value and we are working with several service and maintenance clients. Role Description The role will help lead our project management operations. The role is a key part of the team as it will bring together internal and external people and teams to deliver projects efficiently. We have processes and procedures, but there is an opportunity to shape the business. Good communication skills are essential, and you must be self-motivated. The ideal...

BMS Service Engineer - Contract Locations: Bracknell (x1) & Bristol / South West (x1) Contract Length: 8 Months Start Date: 1-2 Weeks Rate: £320 - £350 per day Overview: We are currently seeking two experienced BMS Service Engineers for an 8-month contract supporting a retail project. The role will involve a mix of planned preventative maintenance (PPM) and reactive service visits across multiple sites. Key Responsibilities: Carry out Annual PPM visits on BMS systems Attend and resolve reactive service calls Work primarily in back-of-house environments Occasional shop-floor work, which may require out-of-hours attendanceEssential Skills & Experience: Strong experience with Trend BMS systems Proven background in servicing and maintaining BMS systems Ability to work independently across multiple sitesAdditional Information: Out-of-hours work may be required occasionally, but is not a core part of the role Ideal for engineers based in or near the respective locations