16 jobs found in Halesowen

Job Title: Plant Quality Engineer (Acoustics) Location: Solihull - roles also available at Gaydon & Halewood Rate: £33.88ph via an Umbrella Company (Inside IR35) or £25.26ph PAYE Employment Type: Contract (31/3/2027) Hours: Standard 40 Hours Per Week Reference: J(phone number removed) Job Description: Duties: * Responsible for monitoring and minimising the variability of wind noise performance on current production vehicle lines. * Be an in-plant representative for the wind noise attribute, acting as a voice of the customer in the manufacturing environment. * The role is to detect where attribute performance could vary away from target (via objective measurement, subjective drive, static assessment/measurement, overchecking build conformance to assembly process, etc.). * Perform initial root cause investigation and drive issues through to resolution with the relevant responsible areas. * This role will liase closely with core aeroacoustics team to...

Rullion are looking to recruit for the below role: Repairs Engineer ASAP Start Duration - Initially 6 months Rolling contract Inside IR35 £41-43 Per hour Location - Warwick UK. Site based Mainly. Full and Part Time Hours depending on flexiblility Our client an exciting opportunity within the Global Repair Network Team working closely with our external network of MROCs (Maintenance, Repair & Overhaul Centre's) and authorized Repair Vendors. The Repair Engineer (FTC) role within the Repair Network Engineering Team will play a key part in supporting the existing global capability within the Global Repair Network Team as well as future capability developments. Job Description. Support component repair development activities. Assess, investigate and sentence non-conforming components. Support repair scheme amendment/writing and technical variances. Support implementation of improvements & technical solutions (internally & externally). Represent engineering in the...

Role: Assembly Operator Location: Ansty Park, Coventry Duration: 9 months Rate: £18.03/hour Inside IR35: PAYE Swing Shift- 6 am-2pm 2pm-10pm About our client: Our client is a global engineering company specializing in advanced aerospace and defence technologies. They are known for innovation, high-quality standards, and delivering complex solutions for critical programmes. The role: Operate assembly fixtures and associated machinery Set up and changeover of fixtures required for build plan. Guage and measure and record features on products in line with process standards. Maintain and carry out Safety, Quality, TPM and 5 s activity. Attend and support team improvement activity. Follow company policy and procedures. Flexible in working practices at all times. Fill in route cards and any other paperwork clearly as and when required, also updating MRP confirmations. Work at all times in an environment of continuous improvement Work as a team player at all times Inspect and...

We are seeking an experienced Performance Engineer to join a Diesel Performance, Emissions and Validation team within a Product Engineering environment based in Stafford. This is a 12-month contract role offering the opportunity to work on both current production engines and new product introduction programmes. Performance Engineer (Diesel Performance & Emissions) Location: Stafford Rate: £50.00 - £51.31 per hour Contract: 12-month contract (Inside IR35) The Opportunity We are seeking an experienced Performance Engineer to join a Diesel Performance, Emissions and Validation team within a Product Engineering environment based in Stafford. This is a 12-month contract role offering the opportunity to work on both current production engines and new product introduction programmes. You will be responsible for delivering engineering activities that develop engines to meet performance and emissions targets, supported by structured test work. The role has direct impact on...

General Engineering Workshop Technician Engineer Contract Opportunity – Defence Engineering Ceto Talent is recruiting for a General Engineering Workshop Technician Engineer to support a long-term Defence engineering programme based full time onsite in Stafford. This contract offers stability through to August 2026 and hands-on involvement with critical Ground Support Equipment used in operational environments. This General Engineering Workshop Technician Engineer role suits an experienced mechanical engineer who is comfortable working in a regulated, heavy engineering setting and enjoys fault finding, refurbishment and complex repair activity. Contract Details * Job Title: General Engineering Workshop Technician Engineer * Location: Stafford – full time onsite * Contract Length: Until mid-August * IR35 Status: In scope * Pay Rate: £21.52 per hour (Umbrella) The Role As a General Engineering Workshop Technician Engineer, you will form part of a specialist...

Position: NVH Modal test engineer Location: Halewood OR Warwick Position Type: Contract 7 month rolling Inside IR35 £33.88/ 40 hours per week I am currently recruiting on behalf of a Luxury Automotive OEM based in Gaydon OR Halewood who are seeking an NVH Modal Test Engineer to join their team on a long term rolling contract Position: Responsible for monitoring and minimising the variability of wind noise performance on current production vehicle lines. Be an in-plant representative for the wind noise attribute, acting as a voice of the customer in the manufacturing environment. The role is to detect where attribute performance could vary away from target (via objective measurement, subjective drive, static assessment/measurement, over checking build conformance to assembly process, etc.), perform initial root cause investigation and drive issues through to resolution with the relevant responsible areas. This role will liaise closely with core aeroacoustics team to...

Electronics Engineer - Aerospace Location: Cheltenham On‑site Requirement: Predominantly onsite (project‑critical hardware activities) Contract Duration: 6 months Rate: Up to £70 per hour (Umbrella / Inside IR35) Role Overview Our client is seeking an experienced Electronics Engineer to join the Amber Project, supporting the testing, debugging, commissioning, and integration of electronic sensor hardware. This position is a direct replacement for an existing contractor and is required immediately to maintain delivery momentum across critical project activities. The role is strongly hands‑on, focused on board‑level electronics, system integration, and practical engineering support rather than concept‑only design work. The successful engineer will work closely with internal engineering teams and suppliers, contributing to the successful delivery of safety‑critical aerospace electronics. Key Responsibilities Perform board‑level electronics testing and debugging, identifying...

Refrigeration Engineer - Environmental Test Chambers Location: Cheltenham (on‑site) Duration: 12‑month contract Status: Inside IR35 Rate: negotiable on experience ur client is seeking an experienced refrigeration engineer to join a busy, dynamic facilities and maintenance team on a 64‑acre engineering campus in Cheltenham. You will be part of a 16‑person team that includes refrigeration engineers, electricians, plumbers, labourers and a gardener, supporting critical test and production facilities across the site. The Role Day‑to‑day maintenance and management of environmental stress screening (ESS) chambers Fault finding and diagnostics on environmental chambers and associated systems Programming chambers to support product testing, including temperature, humidity and other environmental profiles Planning and supporting preventative and corrective maintenance activities Working on additional equipment such as laser wire markers, vibration systems and other specialist...

Electronics Engineer - Aerospace Location: Bishops Cleeve (Cheltenham) On‑site Requirement: Predominantly onsite (project‑critical hardware activities) Contract Duration: 6 months (with project demand through July 2026) Rate: £70 per hour (Umbrella / Inside IR35) Full time Role Overview Our client is seeking an experienced Electronics Engineer to join a live Project, supporting the testing, debugging, commissioning, and integration of electronic sensor hardware. This position is a direct replacement for an existing contractor and is required immediately to maintain delivery momentum across critical project activities. The role is strongly hands‑on, focused on board‑level electronics, system integration, and practical engineering support rather than concept‑only design work. The successful engineer will work closely with internal engineering teams and suppliers, contributing to the successful delivery of safety‑critical aerospace electronics. Key Responsibilities Perform...

Electronics Engineer - Aerospace Location: Bishops Cleeve (Cheltenham) On‑site Requirement: Predominantly onsite (project‑critical hardware activities) Contract Duration: 6 months (with project demand through July 2026) Rate: £70 per hour (Umbrella / Inside IR35) Full time Role Overview Our client is seeking an experienced Electronics Engineer to join a live Project, supporting the testing, debugging, commissioning, and integration of electronic sensor hardware. This position is a direct replacement for an existing contractor and is required immediately to maintain delivery momentum across critical project activities. The role is strongly hands‑on, focused on board‑level electronics, system integration, and practical engineering support rather than concept‑only design work. The successful engineer will work closely with internal engineering teams and suppliers, contributing to the successful delivery of safety‑critical aerospace electronics. Key Responsibilities Perform...

Sapien Engineering are looking for a Mechanical Design Engineer to join a turbomachinery business on a contract basis. This is inside IR35 and requires on site work in Derby. The role is an initial 3-6 months with the view to extend, paying circa £45 - £55 per hour depending on experience. Job requirements: * Siemens NX * Gas Turbines (essential) * Test rig design * Proven experience working on multiple projects simultaneously * Technical documentation * Proven experience working on new as well as existing products Please note all applicants must have full eligibility to work in the UK. For more information, please apply with an updated copy of your CV ASAP

Are you a Quality Assurance Engineer with a track record working for a main contractor on a heavy civils project? Do you have experience producing and compiling quality assurance and handover documentation? Location: Banbury Duration: 6mths rolling (2 years worth of work) Rate: £400 - £450/day DOE IR35: Inside via umbrella company. This role offers hybrid working - 3 x days in the office and 2 x days from home. Our client is a leading contractor on HS2 and due to an increase in their work bank, they require a Quality Assurance Engineer to support their busy site teams in ensuring all quality documentation is created and completed accurately and on time. This role requires the individual to have experience producing quality assurance documentation. Responsibilities: Assist site teams with the completion of Inspection and Test Plans (ITPs) and quality check sheets. Take ownership of producing and compiling comprehensive quality and handover packs. Proactively chase...

Company Description Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 7,500 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimize the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked third in the world for nuclear engineering. To ensure a viable, efficient, and reliable energy...

Role: General Foreman Location: Wanlip STW Rate: circa £400 p/d - Inside IR35 Duration: 12 Months Sector: Wastewater/Sewage Treatment Works (STW) Are you a General Foreman with experience working in the water sector? The business we are working with is a contractor looking to strengthen its delivery team for the remainder of the AMP7 funding cycle on its large framework portfolio on behalf of Severn Trent Water. The successful General Foreman will work with Project Managers and construction teams at a large site in wanlip, as well as subcontractors, to ensure the successful on-site delivery of complex non-infrastructure projects in the waastewater sector. Due to the complexities involved, you MUST have experience as a General Foreman/Site Supervisor. We can consider candidates from a Tier 1 or Tier 2 contractor background, provided you have worked on projects associated with UK Water Authorities. Responsibilities: ·General management of all construction and civil...

Our global motorcycle manufacturing client is urgently looking to fill the following role: CNC Machinist - Mastercam - £23-£25/hr (Inside IR35) - Leicestershire Job Purpose: As a CNC machinist you will play a crucial role in the production process working alongside a skilled team of engineers and technicians, producing one-off and limited runs of prototype components to aid the wider team in the development of new models of motorbikes to bring to the global market. Your expertise in all aspects of machining techniques and attention to detail will ensure the quality and efficiency of our manufacturing operation. Key Responsibilities: - Read and understand engineering drawings and technical specifications to understand machining requirements. - Set up and operate CNC vertical machining centres, with CNC programming and process knowledge. - Experience operating conventional machinery including lathes, milling, and metal cutting machines. - Monitor machine performance and make...

Ref: MNS42648 Location: Crewe (CW1) Hours: Monday to Friday 8am-5pm (40hrs per week) Pay: £23.40ph paid weekly via umbrella – inside IR35 (no CIS/LTD) Duration: Ongoing Contract – Long Term    Duties PPM’s & reactive maintenance of a large commercial facility as part of the wider building services maintenance team.    Person Specification Must be fully qualified Mechanically/Plumbing