16 housing officer jobs found

Our client has an opportunity for a Repairs Engineer to join them on a contract basis until December 2026. You will be responsible for Authoring, Leading and executing repair tasks within a small team. Role: Repairs Design Engineer Location: Filton, 60% onsite Hours: 35 per week Hourly Rate: Up to £52 per hour via Umbrella, inside IR35 Clearance: BPSS required before starting What you'll be doing: Evaluate daily customer requests regarding structural damage on in-service aircraft. Describe all the actions needed to repair aircraft via Structural Repair Instructions. Providing Structural Repair Support: Leveraging experience and technical expertise to address complex structural repair matters. This includes devising innovative solutions for both minor and major repairs requested by customers ensuring high standards of safety and reliability. Utilizing a deep understanding of historical damage and repair scenarios to investigate and identify the existence of similar previous...

Principal Electrical Engineer Remote with occasional visits to the office Location - Manchester OR London OR Newcastle OR Glasgow Contract role - 6 months rolling Inside IR35 - £65 / hour Umbrella A Principal Electrical Engineer is required to join a design consultancy on a 6-month rolling contract. The role is remote, but you MUST be willing to occasionally travel to either Manchester, London, Newcastle or Glasgow (dependent on your location). This role will be working in the Energy Transition industry working on low-carbon projects at all stages of maturity, including Feasibility Studies, Concept Design, FEED, Value Engineering and Detailed Design. Responsibilities Lead and support the development of practical, cost-effective and innovative engineering solutions in collaboration with wider project teams. Deliver electrical engineering projects from early-stage feasibility through to detailed design. Prepare and develop electrical deliverables including single line...

Principal Electrical Engineer Remote with occasional visits to the office Location - Manchester OR London OR Newcastle OR Glasgow Contract role - 6 months rolling Inside IR35 - £65 / hour Umbrella A Principal Electrical Engineer is required to join a design consultancy on a 6-month rolling contract. The role is remote, but you MUST be willing to occasionally travel to either Manchester, London, Newcastle or Glasgow (dependent on your location). This role will be working in the Energy Transition industry working on low-carbon projects at all stages of maturity, including Feasibility Studies, Concept Design, FEED, Value Engineering and Detailed Design. Responsibilities Lead and support the development of practical, cost-effective and innovative engineering solutions in collaboration with wider project teams. Deliver electrical engineering projects from early-stage feasibility through to detailed design. Prepare and develop electrical deliverables including single line...

Principal Electrical Engineer Remote with occasional visits to the office Location - Manchester OR London OR Newcastle OR Glasgow Contract role - 6 months rolling Inside IR35 - £65 / hour Umbrella A Principal Electrical Engineer is required to join a design consultancy on a 6-month rolling contract. The role is remote, but you MUST be willing to occasionally travel to either Manchester, London, Newcastle or Glasgow (dependent on your location). This role will be working in the Energy Transition industry working on low-carbon projects at all stages of maturity, including Feasibility Studies, Concept Design, FEED, Value Engineering and Detailed Design. Responsibilities Lead and support the development of practical, cost-effective and innovative engineering solutions in collaboration with wider project teams. Deliver electrical engineering projects from early-stage feasibility through to detailed design. Prepare and develop electrical deliverables including single line...

Principal Electrical Engineer Remote with occasional visits to the office Location - Manchester OR London OR Newcastle OR Glasgow Contract role - 6 months rolling Inside IR35 - £65 / hour Umbrella A Principal Electrical Engineer is required to join a design consultancy on a 6-month rolling contract. The role is remote, but you MUST be willing to occasionally travel to either Manchester, London, Newcastle or Glasgow (dependent on your location). This role will be working in the Energy Transition industry working on low-carbon projects at all stages of maturity, including Feasibility Studies, Concept Design, FEED, Value Engineering and Detailed Design. Responsibilities Lead and support the development of practical, cost-effective and innovative engineering solutions in collaboration with wider project teams. Deliver electrical engineering projects from early-stage feasibility through to detailed design. Prepare and develop electrical deliverables including single line...

We’re seeking an experienced EC&I Hardware Designer for an initial 12-month contract, based in Warrington (inside IR35). This role is ideal for an engineer with strong electrical design skills and experience in regulated industries, particularly nuclear. Join a technically driven team and contribute to complex, safety-critical projects with hybrid working flexibility. Salary Contract – Inside IR35 (rate discussed on application) Location and Working Pattern Warrington – Hybrid working (2–3 days office-based per week with flexibility) Client Overview Our client is a highly respected engineering organisation delivering complex and safety-critical control and automation systems within the nuclear sector. Their commitment to quality and technical excellence supports some of the most challenging and regulated projects in the UK. Responsibilities Design and develop electrical enclosures, control panels, and interface systems. Produce detailed AutoCAD drawings and...

On behalf of our client, we are seeking to recruit a Surface Technology Specialist on an initial 9 -month contract. As the Surface Technology Specialist, you will work on the development, qualification and technical support of the Surface Technologies used for Corrosion Protection, Tribology and other applications of Aircraft airframe. You will join a team of highly motivated and appreciated people to develop and deploy new benchmarks of robust and sustainable Surface Technologies such as high-performance paints and coatings, surface treatments/coatings and sealants. Role: Surface Technology Specialist Pay: £40 per hour Via Umbrella Location: Filton Contract: Monday - Friday 35 hours per week, 9 months IR35 Status: Inside Security Clearance: BPSS Responsibilities Developing and deploying Materials, Processes and Test Technologies for mature design and build Providing corrosion protection, sealing concepts and solutions to enable design, build and operation of aircraft,...

enior DevOps Engineer (Contract) £700 per day | 3-Month Contract (Likely to Extend) | Onsite - Oxford Based Are you a Platform/Linux/DevOps expert who thrives on complex challenges? Do you love working at the intersection of science, technology, and hardware innovation? Ready to join a high-growth, cutting-edge tech environment where your impact is immediate? Our client, a scaling technology business with ambitious plans, is on the lookout for seasoned Senior Linux Platform Engineers to play a pivotal role in their DevOps transformation. This is your chance to join a project that blends scientific complexity with technological excellence, perfect for DevOps professionals who enjoy solving sophisticated problems, influencing infrastructure decisions, and working hands-on with the latest in modern tooling. Why This Role is Great * Shape the Future of Infrastructure: Drive the migration from Linux-based systems to cloud-native environments in a way that blends reliability,...

On behalf of our client, we are looking for a Test Equipment Design Support Engineer to join them on an initial 6-month basis. As Test Equipment Design Support Engineer, you will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support Role: Test Equipment Design Support Engineer Pay: £65 per hour via Umbrella Location: Bolton Contract: 6 months (possible extension) IR35 Status: Inside Security Clearance: BPSS however requires Security Clearance Skillset/experience required: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines: - Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB...

Our OEM Client based in Coventry, is searching for an EDS CAD Design Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of October 2026. As an EDS Design Engineer within the companies PVO Team, you will be involved at all stages of the design and development process. You will liaise directly with customers, and the cross-engineering teams, to provide and deliver effective engineering solutions. Responsible for the inception, development and release 3D Harness design and packaging across a broad range of company prototype projects Key Aspects of the role ·       Create 3D CAD for LV and HV Harnesses (CATIA V6) Electrical and Electronic installations collaborating closely with Electrical, Chassis, and Powertrain design teams. ·       Design and package EDS, Wire Harnesses and associated components to required electrical modeling standard. ·       Prepare documentation for internal and customer use for electrical installations ·...

On behalf of our client, we are seeking to recruit a Manufacturing Engineering Serial Process Engineer on an initial 12 -month contract. As the Manufacturing Engineering Serial Process Engineer, you will be a crucial link between the Design Office, Manufacturing Engineering Team and Production, by managing and maintaining work instructions derived from technical drawings, using the company's ERP system (SAP). Role: Manufacturing Engineering Serial Process Engineer Pay: £40.13 per hour Via Umbrella Location: Broughton Contract: Monday - Friday 37 hours per week, 12 months IR35 Status: Inside Security Clearance: BPSS Responsibilities Define and write assembly work processes, create specifications for assembly tools, and define methods for implementing modifications in production. You'll also create and ensure the consistency of manufacturing engineering dossiers with design dossiers. Launch parts and assembly items, provide on-site support, and prepare additional...

Manufacturing Engineer 12 month contract Based in Broughton Offering £40.13ph Inside IR35 Do you have experience using SAP? Do you have experience working within the Aerospace/Avionics industry? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Define and write assembly work processes, create specifications for assembly tools, and define methods for implementing modifications in production Create and ensure the consistency of manufacturing engineering dossiers with design dossiers Launch parts and assembly items, provide on-site support, and prepare additional manufacturing...

Facility NPI Procurement Professional Purchasing Specialist / NPI Buyer May also suit a Supply Chain Analyst, Buyer, Expeditor or Procurement Specialist with strong admin skills £29.50 ph FCSA Umbrella (This role is deemed inside IR35) or £21.50 ph paye Purchasing Administrator Peterlee Mon-Fri on site in Peterlee   We are currently looking for a Purchasing Administrator with good solid administration experience & Strong Excel skills Do you have experience of researching & sourcing new suppliers within this purchasing office, grief resolution, procurement support & confident using Excel & associated Programs We have an opportunity with a local company who are looking to source a person for a long term contract opportunity (min 12 months) We require a Purchasing Administrator.   The responsibilities and tasks for this job include the supplier administration, analysis of data compliance for all locations throughout this global business. You will provide...

Commissioning Engineer (Mechanically Biased) Warrington Contract until Jan 2027 Inside IR35   Responsibilities The Commissioning Engineer reporting to the Commissioning Team Leader, carries out a role to undertake delivery of assigned commissioning tasks in a safe and effective manner, in line with commissioning process requirements. This role is specific to candidates with experience in nuclear in-cell handler testing.    The Commissioning Engineer is responsible for: Delivering the commissioning work scope to an agreed strategy and plan in a timely and cost effective manner Execution of the arrangements for controlling, witnessing, recording and assessing the results of commissioning tests which may affect safety. Ensuring a proactive and balanced approach to safety (nuclear, radiological, conventional and environmental) to ensure that safety is optimised during commissioning Reviewing commissioning progress and performance and taking appropriate corrective actions where...

World Class Defence Organisation based in Stevenage (the role can be a split of working Onsite and Working From Home) is currently looking to recruit a Bid Coordinator on an initial 6 month contract, with very high prospect of extension.    This role would suit a candidate who comes from a strong background of working as a Bid Coordinator, Bid Manager, Bid Specialist or Bid Writer.  An Engineering background would be great.  A background of working in the Defence or Aerospace industry would be great.    Rate: £50 per hour Overtime Rate: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: This role will be 2 or 3 days per week onsite. Duration: 6 Months with very likely prospect of extension. Contracts are often ongoing and long-term.  IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview   Bid Coordinator Job Description: The Test Equipment New Business Support (TE NBS) role...

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Codification Engineer subcontractor on an initial 12 month contract.  The role will be a hybrid position of 1-2 days in office, rest of the week remote.   Candidates from the following fields would be well suited to this role: Configuration Engineer, Engineering Data Engineer, Engineering Data Analyst, Technical Data Engineer, Product Configuration Engineer, ILS Engineer (Integrated Logistics Support Engineer), Supportability Engineer, Defence Logistics Engineer, Logistics Engineer, Supply Chain Engineer (Defence), Codification Engineer, NATO Codification Specialist, NSN Codification Engineer, PLM Engineer, SAP Master Data Engineer, and Configuration/Data Management Specialist within engineering or manufacturing environments. Rate: £45 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote...