151 jobs found in Congleton

Cure Talent are delighted to be partnered with an established medical device manufacturer as they appoint a Product Development Scientist to join their R&D function on an initial 12 month fixed term contract. This is offered on an initial 12 month fixed term contract, with a strong likelihood of transitioning into a permanent position thereafter. The position has arisen due to maternity leave within the team and is positioned as a genuine opportunity to embed yourself within a growing development function. As the new Product Development Scientist, you will play a hands on role within new product development, line extensions and design changes across a portfolio of sterile, single use medical devices. This is a practical, laboratory focused role, with clear responsibility for physical testing, design control documentation and validation support. You will work closely with Regulatory, Quality, Operations and Commercial teams to ensure projects are delivered in line with...

Looking for a new opportunity in your career? Interested in joining a dynamic team working state of the arc vehicles? Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox...

Job Title: Mechanical Fitter (Full Training Provided) Location: Crewe, Cheshire Hours: Monday to Friday 8:00am - 4:30pm (37 hours per week) - flexibility required to work shifts Pay Rate: £16.57 per hour PAYE / £21.44 per hour Umbrella (Training rate - approx. first 6 weeks) £18.82 per hour PAYE / £24.40 per hour Umbrella (Post training) Duration: Ongoing Start Date: March / April 2026 Training Day: Very likely to be 27th March 2026 We are recruiting over Mechanical Fitters for long-term contracts at the Crewe depot. This is a genuine opportunity to move into the Rail industry - full training will be provided. You do not need rail experience. You do not need formal qualifications. If you have at least 18 months' hands-on mechanical experience using tools in a practical environment, we can train you. The role involves the mechanical overhaul of rail bogies, including: Bogie overhaul, damage repair and engineering Wheelset overhaul and repair Gearbox and component repairs...

Job Title: Mechanical Fitter (Full Training Provided) Location: Crewe, Cheshire Hours: Monday to Friday 8:00am - 4:30pm (37 hours per week) - flexibility required to work shifts Pay Rate: £16.57 per hour PAYE / £21.44 per hour Umbrella (Training rate - approx. first 6 weeks) £18.82 per hour PAYE / £24.40 per hour Umbrella (Post training) Duration: Ongoing Start Date: March / April 2026 Training Day: Very likely to be 27th March 2026 We are recruiting over Mechanical Fitters for long-term contracts at the Crewe depot. This is a genuine opportunity to move into the Rail industry - full training will be provided. You do not need rail experience. You do not need formal qualifications. If you have at least 18 months' hands-on mechanical experience using tools in a practical environment, we can train you. The role involves the mechanical overhaul of rail bogies, including: Bogie overhaul, damage repair and engineering Wheelset overhaul and repair Gearbox and component repairs...

Job Title: Rolling Stock Fitter Excellent opportunity for an experienced Mechanical Fitter from a manufacturing / engineering environment. Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Mechanical Fitter – Main Duties: Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies overhaul repair and analysis * Re-engineering and production of spare parts To undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train. They require a Mechanical Fitter...

Job Title: Rolling Stock Fitter Excellent opportunity for an experienced Mechanical Fitter from a manufacturing / engineering environment. Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Mechanical Fitter – Main Duties: Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies overhaul repair and analysis * Re-engineering and production of spare parts To undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train. They require a Mechanical Fitter...

We are recruiting Panel Wirers for a specialist engineering company in Stoke-on-Trent, focused on fitting industrial scanning systems and electrical control panels onto large commercial vehicles and trucks. The role involves installing complex electrical systems and control panels onto vehicle chassis. You'll be working from engineering drawings to wire, fit, and terminate electrical components and cabling for industrial-grade scanning and automation equipment. Key Responsibilities: Electrical installation of scanning systems and control panels on large vehicles Wiring complete systems onto truck and van chassis Fitting of data and comms cabling including RJ45, Cat5/Cat6 General mechanical fitting: marking out, drilling, tapping, bracket fitting Reading and interpreting engineering wiring diagrams and schematics Using hand and power tools for installation tasks Experience with vehicle conversions is beneficial

Quality Technician (days) Winsford £14.26 per hour + overtime (x1.25/x1.5) Contract to permanent role (benefits)   Certain Advantage is partnering with an automotive manufacturer to recruit an experienced Quality Technician. You will be responsible for ensuring all products are completed to specification and up to the highest quality standard.   Key Responsibilities: Oversee the completion of each product to required specifications. Conduct thorough quality assessments throughout the production process. Carry out final checks on all finished items prior to presentation and customer dispatch. Confirm that all products comply with relevant type approval standards. Produce and submit a detailed quality report for every finished product. Comply fully with Health & Safety legislation and company safety procedures. Reduce material waste through careful and efficient use of resources and consumables.  Your Background: Highly organised, motivated, and proactive with strong...

Ambitek is recruiting for Skilled Structural MIG Welders to join our client's team in Winsford. This is a fantastic opportunity for experienced professionals looking for long-term work. Key Responsibilities: ✅ MIG welding of structural beams and end-plates ✅ Perform solid wire MIG welding in the down-hand position ✅ Complete a 10mm T-joint multi-run fillet weld to a high standard ✅ Ensure all welds meet the required quality and safety standards Requirements: ✔️ Proven experience in structural MIG welding ✔️ Ability to perform a 10mm T-joint multi-run fillet weld ✔️ Ability to pass a trades test before starting 📌 CIS or Umbrella only 💰 Rate: £19.85/hour (basic) | £27.03/hour (overtime after 39 hours) 🕒 Hours: * Mon – Thurs: 07:45 AM – 16:45 PM * Fri: 07:45 AM – 12:45 PM ⚠️ Local candidates only – Accommodation is not provided 🚀 Immediate starts available upon successful completion of the trade test. Apply now

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

6-9 Months work - Energy From Waste Plant - Northwich. Minimum 45 hrs per week. The rates for this role will be as follows based on a CIS basis. Mon-Fri(1st 39hrs) £26.00 Mon-Fri(over 39hrs) £32.50 Sat(1st 4hrs) £32.50 Sat(over 4hrs) £39.00 Sun(all hrs) £39.00 Safety passport and JIB card/proof of trade required and ideally experience within an industrial environment would be great

Ambitek are currently recruiting a Fabricator/Welder on a long-term basis for our client based in Northwich. This is predominantly workshop-based, with some site work required. Working Hours * Monday to Thursday: 07:00 – 16:00 * Friday: 07:00 – 13:00 Key Requirements * Competent in ARC (Stick) welding * Competent in MIG welding * Strong fabrication experience * Vertical stick welding experience essential * Valid CSCS and EMSS or CCNSG certification required for site work Additional Information * Long-term position * Workshop-based with occasional site work * Local candidates only – no digs provided If you’re a skilled Fabricator/Welder looking for stable long-term work in the Northwich area, we want to hear from you

LOCAL CANDIDATES ONLY, CLIENT NOT SUPPLYING DIGS*** Ambitek are currently recruiting on behalf of our client for an experienced HDPE Pipefitter / Fusion Welder to join an ongoing project in Northwich, supporting the redevelopment of a disused Biomass Plant. Location: Northwich, Cheshire Start Date: Immediate Duration: 3-week trial (with potential for 3–6 months ongoing work) Role Overview This position will focus on the installation and on-site fusion welding of HDPE pipework, working on straight runs installed mainly on pipe bridges. Day-to-Day Duties * Installation of HDPE pipework on site * Fusion welding HDPE lines ranging from 1” up to 10” * Working safely and efficiently to site requirements * Use of HDPE fusion welding machines and associated equipment Requirements * Proven experience in HDPE fusion welding (essential) * Confident using HDPE fusion welding machines * Valid SCATTS or CSCS or CCNSG or EMSS...

Job Opportunity: Principal CE&I Engineer Location: Manchester Contract Type: 12 month/full time 🔧 About the Role We are seeking an experienced Principal CE&I Engineer to lead, manage and deliver high‑quality CE&I design solutions for a major nuclear processing, storage and decommissioning facility. This is a senior technical role requiring strong leadership, deep engineering expertise and the ability to work collaboratively with clients, Responsible Engineers and multidisciplinary teams. You will play a pivotal role in shaping design strategy, ensuring compliance with Sellafield, British and European Standards, and guiding projects from early concept through to detailed design and tender documentation. 🧩 Key Responsibilities Lead the management, review and delivery of CE&I design deliverables for complex nuclear projects. Interpret and implement Sellafield, British and European Standards to produce bespoke tender documentation and associated design outputs....

Manufacturing Feasibility Engineer Scope of Services The Launch Quality Centre Manufacturing Feasibility Engineer is responsible for ensuring that Manufacturing Feasibility is evaluated in line with business process. Manufacturing Feasibility issues to be presented and agreed cross functionally and the product style and design influenced to support Manufacturing targets & functional deliverables. Key Deliverables 1. Analysis of final assembly feasibility on future programmes: 1. Review style and design to identify & subsequently resolve manufacturing feasibility concerns and support Manufacturing Functional deliverables i.e. Design For Manufacture best practice, assembly time targets, production quality targets 2. Conduct analysis of part design through virtual and physical studies to provide recommendations, identify issues and support problem resolution. 3. Analyse dimensional management outputs and develop assembly strategies to ensure product quality...

We are looking for a Logistics Coordinator to work on the UK's first commercial scale LAES plant, based in South Manchester. The position is available as a hybrid working arrangement Purpose: Coordinate the collection, consolidation as appropriate, transportation and tracking of goods to designated arrival to ensure;- Shipments prior to ROS date or agreed site schedule; - Appropriate handling is to industry standards ensuring condition of goods on arrival at destination. - The completeness and accuracy of Shipment Documentation and Files (Electronic and Hard Copy) Key Activities: The responsibilities of the role will include, but not limited to: Assess and determine order of priorities on a daily basis with regard to developing project priorities. Obtain details of cargo to be transported from Suppliers, HVP Engineering/QA Generate Project MMT reports in Aveva ERM Coordinate with Project FF on all day-to-day shipping activities. Monitor FF MMT relevant transport bookings....

Manufacturing Engineer - Vehicle Assembly On-site 12 months fixed term contract We are looking for an experienced Assembly Manufacturing Engineer to join a well-established engineering organisation . This opportunity has arisen due to continued programme development and the growth of the manufacturing function within the organisation. The business has a long heritage of delivering high-quality engineering solutions for defence and military applications, supporting customers globally with advanced manufacturing capabilities and specialist engineering expertise. This role will focus on the Assembly, Integration and Test (AIT) manufacturing processes . You will play a key role in transferring production knowledge, supporting manufacturing operations on the shop floor, and driving continuous improvement during production ramp-up and beyond. This role would suit a Manufacturing Engineer with experience in complex engineering environments who enjoys working closely with...

EE Low Voltage Systems Engineer Scope & Skills summary Scope of Work * Develop, Integrate, Validate, and Sign off Low Voltage Systems, across all relevant projects * Responsibility for hardware and software management (System 42), check & approve circuit diagrams (Schaltplans), support the development of functions, networking, and communications between ECUs. Use diagnostic troubleshooting skills to resolve vehicle issues. * Support all Compliance, Functional Safety, and Golden Rules (ENG (Apply online only) Emissions Control Module Application Process) activities as required. Key Deliverables * Develop, Integrate and Validate the Low Voltage Components, both on and off vehicle, for all relevant projects in line with the company Product Emergence Process. * Work cross functionally within Electrical & Electronics, Whole Vehicle, Body & Trim, and Motion Engineering R&D departments, to deliver a Low Voltage system that meets customer and vehicle...

Graduate / Intern Project Engineer (Electrical Bias) Location: Near Manchester Type: 3-Month Contract (Potential Extension) Salary: Dependent on experience / education level A chemical manufacturing business near Manchester is looking for a Graduate / Intern Project Engineer to support a key site-wide CMMS implementation project. Due to when this project will start we are only considering candidates who are already based in the local area. There are strong public transport links from the local area for those who haven't got their own transport. This role is ideal for: • Recent graduates looking for their first engineering role • Students about to complete their 2nd year of Electrical Engineering • Interns or placement students What you'll do: • Assist with rollout and integration of the CMMS system • Support data collection, asset verification, and system input • Work alongside Maintenance and Engineering teams • Help improve maintenance processes and documentation...

Our client are a small engineering firm who are looking to recruit a semi skilled fitter to join the team. 2 shifts are available either a 6am or 7am start. For a 6am shift the hours are 6-3 Monday – Thursday and 6-11 Friday. * To fully assemble and construct a complete assembly as per drawings. * Monitor the build of the components assembly and ensure all parts are fit for purpose. * Ensuring that all components used in the manufacture of the products are in line, straight, by using the correct and associated jigs and tools. * Continuously assessing the assemblies for quality and ensuring that all areas of the construction, meet the agreed specification and conformance requirements. * Capable of reading and understanding of general arrangement and detailed engineering drawings. * Reporting of all non-conforming parts/parts of poor quality to the supervisor. * Ensure that all work undertaken is fully understood before commencing the final assembly of components. *...