167 jobs found in Crick

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in Rugby As a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems. Requirements City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. IPAF (desirable) CSCS Card F-Gas (desirable)£32.50 per hour (CIS). Monday-Friday, 8 hours per day. To find out more information, please apply or contact Matt Bees at TXM Recruit. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection or application process due to disability or a long-term health condition, we will do our best to assist you. IND2

Air Conditioning Installation Engineer - TXM Recruit are currently looking for a AC Engineer to complete commercial installation work, at a busy distribution depot in Rugby As a AC or HVAC Engineer, you will be responsible for the installation of various air handling units, fan coil units, and associated works including VRV systems. Requirements City & Guilds level 3 in Refrigeration and Air Conditioning. – Or equivalent. IPAF (desirable) CSCS Card F-Gas (desirable)£32.50 per hour (CIS). Monday-Friday, 8 hours per day. To find out more information, please apply or contact Matt Bees at TXM Recruit. TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection or application process due to disability or a long-term health condition, we will do our best to assist you. IND2

Rubicon Consulting is currently recruiting for 3x System Engineers on a 6 month contract based in Rugby. Role Summary Own the DFMEA: Be the Subject Matter Expert (SME) and power-user of Reliasoft. You will be responsible for the integrity, structure, and execution of the DFMEA for our key propulsion and electrical components. Facilitate & Influence: Lead high-stakes technical workshops. You’ll sit down with our busiest Lead Design Engineers, extract their deep technical knowledge, and translate their design insights into structured failure modes and mitigation strategies. The "Scribe" & The Strategist: You will be the primary scribe, turning complex engineering inputs into clean, actionable data in Reliasoft. You’ll challenge assumptions and push for better design outcomes. Drive Progress: You are the face of reliability. You will track our progress, report on key performance indicators (KPIs), and present clear, data-driven status updates to project leadership and our...

Role - Systems Engineer Location - Rugby, Warwick NOTE: Must have SC Clearance, must be UK National  due to security clearance requirements Responsibilities - Own the DFMEA: Be the Subject Matter Expert (SME) and power-user of Reliasoft. - You will be responsible for the integrity, structure, and execution of the DFMEA for  key propulsion and electrical components. - Facilitate & Influence: Lead high-stakes technical workshops. Work with the busiest Lead Design Engineers, extract their deep technical knowledge, and translate their design insights into structured failure modes and mitigation strategies. - The "Scribe" & The Strategist: You will be the primary scribe, turning complex engineering inputs into clean, actionable data in Reliasoft. You’ll challenge assumptions and push for better design outcomes. Drive Progress: You are the face of reliability. You will track our progress, report on key performance indicators (KPIs), and present clear, data-driven...

This amazing long term contract Mechanical Design Engineer contract with a leading Formula One organisation in Northamptonshire, is to support a range of high-performance, advanced technology programmes. This is an exciting opportunity to contribute to world-class engineering projects in a fast-paced, innovation-driven environment. The Role As a Mechanical Design Engineer, you will support the design and development of mechanical components and systems, contributing across the full product lifecycle — from concept through to validation and release. You’ll work closely with cross-functional teams to deliver high-quality, right-first-time engineering solutions across a variety of technically demanding projects. Key Responsibilities Design and develop mechanical components and assemblies across motorsport and advanced automotive programmes Support engineering activities from clean sheet concept through to end-of-life Produce detailed designs for complex, highly loaded components Apply...

MIG Welder Corby We are looking for an experienced MIG Welder to join a well-established manufacturing company in Corby, specialising in irrigation equipment. This is a fantastic opportunity for long-term, stable work in a busy, supportive workshop environment. Pay: £16.21/hr | Overtime: £24.31/hr Working Hours: Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 16:30The Role: MIG welding mild steel (1mm - 15mm) Welding thin and thick sections, with or without jigs Producing strong, water-tight welds Reading and following engineering drawings Preparing materials and setting up equipment Inspecting welds to ensure quality standards Maintaining a clean and safe working environment Meeting production targets and deadlinesWhat We're Looking For: Proven experience as a MIG Welder Confident welding mild steel across varying thicknesses Ability to read and interpret engineering drawings Strong attention to detail Reliable and a good team player Flexible for overtime when...

Carmichael UK are recruiting for an experienced Site Engineer with strong highways and drainage experience to join one of the UK's largest and most prestigious infrastructure projects, supporting the delivery of HS2 in Northamptonshire. This is an excellent opportunity to be part of a landmark scheme, working alongside experienced delivery teams to deliver key highways and drainage packages safely, efficiently and to the highest quality standards. The Role Reporting to the Section Engineer and Sub Agent, you'll be responsible for supporting the day-to-day delivery of highways and drainage works, ensuring all engineering activities are carried out in accordance with project specifications, programme requirements and HS2 standards. You'll play a key role in setting out, quality assurance and coordinating site activities to support the successful delivery of the project. Responsibilities: • Carry out setting out and surveying activities for highways and drainage works • Ensure...

Carmichael UK is working with a leading Tier 1 contractor delivering major infrastructure works on the HS2 project. We are currently seeking an experienced Site Engineer with earthworks experience to support the delivery of works across a key section of the project in Northamptonshire. This is an excellent opportunity to join one of the UK’s most significant infrastructure programmes and play a key role in delivering highways packages on a flagship project. The Role As Site Engineer, you will support the delivery of earthworks works, ensuring activities are carried out safely, efficiently, and in line with project specifications, programme requirements, and quality standards. Key Responsibilities Setting out and overseeing  earthworks including road construction and associated infrastructure Monitoring site activities to ensure compliance with design and specifications Carrying out as-built surveys and maintaining accurate engineering records Preparing and updating...

The Role As Site Engineer, you will support the delivery of structures works, ensuring activities are carried out safely, efficiently, and in line with project specifications, programme requirements, and quality standards. Key Responsibilities Setting out and overseeing structures works including bridges and reinforced concrete elements Monitoring site activities to ensure compliance with design and specifications Carrying out as-built surveys and maintaining accurate engineering records Preparing and updating Inspection & Test Plans (ITPs) and supporting quality assurance processes Producing site diaries and documentation Coordinating site activities with subcontractors and supervisors Ensuring works are delivered in accordance with HS2 standards and project procedures Requirements Proven experience as a Site Engineer within civil engineering or infrastructure projects Strong experience in structures works (bridges, viaducts, reinforced concrete) Previous...

Job description: As a key member of our manufacturing operation, you will be responsible for producing high-precision crankshafts, camshafts, and various other engine components for leading super and hyper car manufacturers. The Role: Set up, operate, and monitor multiple CNC machines ensuring optimal performance and safety compliance. Read, interpret, and edit CNC programs, identifying and correcting errors in NC code to ensure smooth production flow. Perform quality control checks using various measurement tools and inspect machinery, tooling, and equipment to maintain product standards. Manufacture components efficiently and cost-effectively, adhering to company standards and procedures. Maintain high level of communication with the Team and report operational issues promptly. Support continuous improvement initiatives by suggesting enhancements to methods, processes, and tooling. Consider the health and safety, environmental and energy impact of all activities....

Job Description As a key member of our manufacturing operation, you will be responsible for producing high-precision crankshafts, camshafts, and various other engine components for leading super and hyper car manufacturers. The Role Set and operate CNC and manual: cylindrical and surface grinders. Perform quality control checks using gauges, perthometer and Adcole equipment. Manufacture components efficiently and cost-effectively, adhering to company standards and procedures. Maintain high level of communication with the Team and report operational issues promptly. Support continuous improvement initiatives by suggesting enhancements to methods, processes, and tooling. Consider the health and safety, environmental and energy impact of all activities. Support the Company’s compliance with the UK General Data Protection Regulation (UK GDPR) and the Data Protection Act 2018 by following company policy and best practice. Candidate Profile Experience as a CNC Grinder,...

Automation Engineer - Contract | Immediate Start Initial 3-month contract, with strong potential to extend to 6 months We are recruiting on behalf of our client,who is looking for experienced Automation Engineers to join a fast-paced, multi-site automation programme across the UK and Europe. You will work alongside the client’s in-house engineering and controls teams, supporting PLC code development, implementation, commissioning, testing and continuous improvement across a network of highly automated sites. This is an excellent opportunity for a hands-on Automation or Controls Engineer to join a high-performing team delivering complex, high-impact projects. Frequent travel across UK will be required. What You’ll Be Doing * Developing, testing and commissioning PLC code using Siemens TIA Portal * Supporting fault-finding and troubleshooting on live automated systems * Leading and contributing to process improvement initiatives * Integrating and migrating code...

Vehicle Builders Wanted - Northampton (all good mechanical knowledge considered) I'm currently recruiting for Vehicle Builders to join a long-term rolling stock project based at in Northampton. Location: Northampton Hours: Monday to Friday, 7:00am - 5:00pm (50 hours paid per week) Pay: £18.68 per hour PAYE/ £25.11ph Umbrella Contract: 12 months rolling Key duties include: Stripping and preparing vehicles for refurbishment Cutting and fitting materials to precise measurements Mechanically fitting Seats, hand rails, luggage racks and more. Installing flooring, carpets, panels and interior components Working with wood, metal, composites, sealants and adhesives Removing and refitting windows We're looking for candidates with experience as: Coach Builder Vehicle Builder Carpenter Shop Fitter Mechanical assembly Vehicle technicians Any mechanical assembly/fitting Or similar hands-on assembly/interior fitting roles An NVQ/IMI/HNC Level 2 (or above) in a relevant trade would be...

DCS Recruitment currently seek an experienced data cabling engineer in Northampton on behalf of a national structured cabling contractor. Vacancies: 1 Contract date: 20/07/2026 Duration: 8 weeks initially ...with potential continuation on later projects following completion 8 hour day shifts 8am-5pm Monday to Friday The cabling engineers on this project will be carrying out wifi network upgrades adding new wireless access points and data cabling to existing network infrastructure. Predominantly CAT6 and containment, which can involve external work as well as internal. The ideal candidate will: Hold a valid ECS/Equivalent structured cabling/comms industry related card or CSCS Must have or be willing to complete first aid awareness course Must have or be willing to complete Manual Handling, asbestos awareness and working at heights (Course can be provided free of charge) Have a minimum of 2 years comms industry experience Be able to provide relevant work references and proof...

We are currently recruiting 2 experienced MHE Drivers, to join our busy warehouse team. This is a full-time, hands-on role involving the safe movement of stock throughout the warehouse using a Clamp Truck. Previous counterbalance experience and an in-date licence is essential. Job Title: MHE Driver Location: Harpole, Northampton, NN7 4 Pay Rate: £14.81 per hour Shift Patterns: (Monday-Friday): 2pm – 10pm Key Duties: Operating a Clamp Truck to move and store stock Loading and unloading deliveries Putting stock away into racking Order picking and stock replenishment Following all health & safety procedures General warehouse duties as required Requirements: Valid, in-date Counterbalance/Clamp Truck Proven warehouse experience Confident working at height Reliable, hardworking, and safety-focused Able to work in a fast-paced environment If interested, APPLY NOW! Alternatively, please send a copy of your CV to

Job Title: Coach / Vehicle Builders. Location: Kings Heath Depot, Northampton. Hours: Monday to Friday, 7:00am - 5:00pm (50 hours per week) Rates: £18.68 PAYE £23.83 Umbrella (pre 12 weeks) £25.11 Umbrella (post 12 weeks) Duration: Ongoing (long-term contract) Company Summary: Working for a leading global provider of mobility solutions across urban, interurban and freight transportation sectors. Position Summary: This role is based at a newly refurbished depot in Northampton, supporting large-scale overhaul projects. You will be part of a team of Vehicle Builders responsible for refitting and modernising the interiors of train carriages. Key Responsibilities: Stripping and preparing vehicles for repair work Cutting and fitting materials to precise measurements Installing components such as panels, flooring, carpets and seating using materials including wood, metal, composites, sealants and adhesives Assembling, fitting and finishing interior and exterior features Using...

Production & Quality Operative (Footwear Industry) Location: Northampton Salary: £14.42 p/h (Equivalent to approx. £30k +)  Salary is negotiable depending on skills, knowledge and experience. Hours: Monday to Thursday 07:30-16:30, Friday’s 07:30-12:30 The Opportunity We are recruiting for an experienced Production & Quality Operative to join a respected footwear manufacturing business with a long-standing reputation for craftsmanship and quality. This role sits within the final inspection process and is responsible for ensuring finished footwear products meet the highest quality standards before reaching customers. The successful candidate will possess extensive knowledge of footwear construction, fault identification, product finishing, and quality rectification techniques. This is a specialist position suited to someone who has built significant experience within the shoe industry and can confidently assess product quality, identify defects, and implement...

TXM Recruit are currently looking for a maintenance operative to work for a rapidly expanding retail maintenance team on a long term cover situation however likelihood is for a permanent role at the end of 3 months. * Location - Northampton * Salary – £14.01/hour (£29,326 per annum basic salary). * Hours - 6am to 3pm - Monday to Friday (Can be flexed for childcare etc) * Contract length - 6 months with potential to go permanent * Weekends - 1-in-4 weekend shift (1.25x rate for Sunday) * Overtime - Overtime is there at 1.5x * Company Van and Tools & Uniform provided - Please note: a driving licence is required for this position, we will unfortunately not be able to consider you for this role if you do not hold a driving licence. As a Maintenance Operative your duties will be but not limited to * General reactive maintenance in store from toilets, shop floor and communal areas. * This may include changing lightbulbs, replacing taps or toilet seats...

System Integration & Test Engineer (Interior Experience) 📍 Location: Gaydon 📅 Contract: Maternity Cover 💷 Rate: £28.42 per hour (Umbrella) We are seeking an experienced System Integration & Test Engineer to join a leading automotive engineering team based in Gaydon. This is an excellent opportunity to work on cutting-edge Interior Experience features, supporting the verification and validation of innovative vehicle systems. Key Responsibilities Create manual and automated feature-level and system-level test cases based on feature and system documentation. Ensure appropriate test techniques are applied and that all test cases are robust, comprehensive, and meet quality standards. Execute feature-level testing on vehicles and system-level testing using Hardware-in-the-Loop (HiL) and Vehicle-in-the-Loop (ViL) environments. Produce detailed test execution reports and provide clear feedback on results. Support defect management activities, including issue investigation and...

I am looking for an experienced Senior CAS Modeller: ✔️ Long term contract ✔️ Warwickshire based ✔️ Must have at least 5-10 years experience ✔️ Alias experience ✔️ Exciting projects Call Rachel NOW on (phone number removed) or apply online with CV Library