19 jobs found in Kendal

We're looking for an experienced CE&I Commissioning Engineer to support a nuclear project in Cumbria on a 12-month contract, covering the full commissioning lifecycle with a strong focus on SCADA (Wonderware InTouch) and Rockwell ControlLogix PLC systems. The role is inside IR45 paying 50 P/H The role Witnessing vendor works tests (FAT/SAT) and producing test evidence Preparing plant commissioning test specifications Early inspection of site installation to enable system handovers Executing testing activities throughout the IPC commissioning phase Fault finding and implementing practical solutions Initiating and implementing FOBs Validating Working Level Instructions (WLIs) Applying and removing Temporary Commissioning Aids (TCAs) Essential experience / qualifications SCADA experience, specifically Wonderware InTouch PLC programming experience, specifically Rockwell ControlLogix Knowledge of control system network architecture Full software/systems lifecycle experience...

Site‑Based CE&I Senior Design Engineer Location: North West Hours: 37 hours per week Security Clearance: SC required (must already hold or be eligible) The Role We are seeking a Senior Control, Electrical & Instrumentation (CE&I) Design Engineer to provide site‑based, frontline design support to commissioning teams on a highly regulated, safety‑critical facility. This is a hands‑on senior design role, embedded at plant level during commissioning, where issues are identified, investigated and resolved through robust engineering judgement and controlled design change. The role is not focused on routine programming or implementation. Dedicated site teams carry out testing, installation and commissioning activities. Your responsibility is to diagnose problems, develop design solutions, and ensure changes meet functional and business requirements. Key Responsibilities Provide frontline CE&I design support to commissioning teams during active commissioning....

Electrical Maintenance Engineer – Liverpool Street - Temp ongoing - £26p/h Are you a Electrical Maintenance Engineer looking for a new challenge? Are you looking for work in and around Liverpool street ? Are you looking for temporary work?  If the answer is yes, then read on... A Fantastic opportunity to work for a leading FM Service Provider situated in Liverpool Street. CBW is currently looking for an Electrical Maintenance Engineer to be based in a Commercial Environment. The successful candidate will be Electrically biased (NVQ, C&G) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out planned and reactive building maintenance to the following : Duties & Responsibilities: Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution) Emergency lighting Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes,...

We are currently looking for an interim Electrical Design Engineer for an initial 6 month period. This role is based in Penrith requiring 1 day per week on site and this may rise in the summer to 2 days per week. The role will involve work surrounding planned maintenance and a few new builds within Council and University properties as a whole. This will involve new rewiring schemes, designing lighting layout, small power for wiring and working with security and fire alarm designers. This would also involve Dialux or Relux along with Electrical OM (sizing cable)

NRL are seeking Painters for long term work on nuclear projects in West Cumbria. This role is fully employed under the CIJC agreement and the successful could have: NVQ level 2 or 3 in painting and decorating or other relevant painting qualifications. CSCS card  IOSH working safely or equivalentWhat is in it for you: Attractive hourly bonuses Excellent rates of pay under the CIJC agreement  Lodge and travel allowances available for non local applicants Life and accident benefitIf you have a wide range of experience as a Painter but you are interested in expanding your expertise into the nuclear sector then this could be the right opportunity for you. The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future.   We welcome applications from every walk of life and are committed to diversity within the industries we...

Job Title: Civils Project Engineer Job Type: Contract Location: Seascale, Hybrid Job Description * Ability to read and interpret engineering drawings and specifications. * Strong verbal and written communication skills and the ability to cultivate good relationships * Understanding of design and visualisation software such as AutoCAD beneficial but not essential. * Experience of using a total station for setting out purposes. * Understanding of project quality and health and safety requirements, including experience of writing risk assessments and method statements. * Good analytical and judgement skills and the ability to develop budgets and track expenditures, including sub-contracting hours. * Be able to use initiative and have the ability to set and meet deadlines * Ability to read and understand schedules and pricing documents and implement them successfully. * Excellent problem-solving skills * Ability to build morale among the teams and promote continuous...

Lead Commissioning Engineer  Seascale £500 per day Hybrid working Certain Advantage are recruiting on behalf of our nuclear client for a Lead Commissioning Engineer. They need someone who will lead Commissioning Engineers and Technicians.   Your responsibilities: Leading all testing activities throughout all stages of commissioning Supervising the production of commissioning test documentation Supervising and organising of Commissioning Technicians and support resources Supervising the initiation and implementation of FOBs and TQs Liaising with the regulatory compliance representatives to ensure witnessing of commissioning activities is expedited Recording and management of Temporary Commissioning Aids Recording of supporting data in accordance with test requirements Ability to utilise completions management systems to manage commissioning activities, and handovers from construction to commissioning and commissioning to the client Knowledge/Qualifications Project...

Multi Skilled Maintenance Engineer – 18 Month Fixed Term Contract Are you out of work? Looking for immedieate starts! Location: Fleetwood, Lancashire Salary: £45,559.25 Shift Pattern: Initially Days (8am–4pm), transitioning to a rotating 3-shift pattern Sector: Food Manufacturing Job Role of the Multi Skilled Maintenance Engineer A fantastic opportunity has arisen for a Multi Skilled Maintenance Engineer to join a well-established British manufacturing business with an outstanding reputation and exciting long-term growth plans. This role offers an initial 18-month fixed-term contract, with a strong likelihood of extension up to three years and potential permanent opportunities as the company continues to expand its operations. Working within a fast-paced manufacturing environment, you will play a key role in delivering safe, reliable, and efficient production through a proactive reliability-led maintenance strategy. The successful engineer will be responsible for maximising...

CE&I Senior Design Engineer Altrad are currently seeking a CE&I Senior Design Engineer to join the Central Engineering team as part of the Silos MSSS SEP1 & 2 CE&I Design Team. The successful candidate will provide site-based design front-line support to Commissioning teams, delivering, supporting the delivery of others, and checking detailed designs/changes to meet functional and business needs. Implementation, testing, and commissioning of the designs are undertaken by other dedicated site-based teams and are outside the scope of this role. Key Deliverables * Provide site-based front-line design support to Commissioning teams. * Deliver, support the delivery of others, and check detailed designs/changes for accuracy and compliance with functional and business requirements. * Ensure all designs/changes adhere to relevant external and company-specific engineering standards. * Collaborate effectively with multidisciplinary teams on site and in the...

5 x Electrical Testing Electricians * Must have experience carrying out EICRs * £28.00 per hour * No digs/travel paid – ideally local to site Working hours are, Monday to Thursday – 7:00am to 3:00pm Friday – 7:00am to 12:00pm Initial duration is approximately 8 weeks, with potential for ongoing works depending on findings throughout the project. ( this will end up being months) We will supply all testing equipment and PPE. Operatives will need to provide their own boots and hand tools

2 x Electrical Labourers * £20.00 per hour] * * Working hours are, Monday to Thursday – 7:00am to 3:00pm Friday – 7:00am to 12:00pm Initial duration is approximately 8 weeks, with potential for ongoing works depending on findings throughout the project. ( this will end up being months) We will supply all testing equipment and PPE. Operatives will need to provide their own boots and hand tools

CNC Turner / Miller Location: Nelson, Lancashire Salary: £15.00 – £16.00 per hour (depending on experience) Hours: Monday – Thursday 8:00am – 5:00pm, Friday 8:00am – 1:00pm We are currently seeking skilled CNC Turners and Millers to join our growing team based in Nelson. This is an excellent opportunity to become part of a close-knit, supportive working environment within a well-established CNC engineering company. Our business operates across a range of exciting sectors including Aerospace, Energy Generation, Automotive, and other high-precision engineering industries. Key Responsibilities: * Setting and operating CNC lathes and/or CNC milling machines * Producing high-quality precision components to engineering drawings * Maintaining a high standard of accuracy and attention to detail * Working efficiently to meet production deadlines Requirements: * Minimum 3 years’ experience in CNC Milling and/or Turning * Ability to set and operate CNC machines...

Maintenance Engineer £35p/h Days / Nights / Weekends Location: Blackburn gap technical are proud to be representing a market-leading manufacturing business in their search for an experienced Maintenance Engineer (Electrical Bias) to support operations at their site in Blackburn The Role Reporting to the Engineering Manager, you will play a key role in supporting the manufacturing process by responding to breakdowns, carrying out planned maintenance, and driving continuous improvement across the site. Key Responsibilities Respond promptly and effectively to equipment breakdowns, ensuring minimal downtime Carry out planned and preventative maintenance activities Fault-find efficiently using machine history, documentation, and diagnostics Take ownership of a nominated production area Identify, correct, and modify recurring machine faults Work closely with production teams to maintain strong working relationships Train operational staff in minor maintenance tasks and assist with...

Fabricators & Welders - Long-Term Contract Opportunities | Rail & Infrastructure A leading UK steel fabrication company is looking for experienced Fabricators & Welders to join their growing team working on major engineering projects within the rail and infrastructure sector. If you have experience working with medium to heavy structural steelwork and are looking for secure, long-term contract work with excellent rates, we want to hear from you. The Role You'll be involved in the fabrication and welding of structural steel components for large-scale engineering and infrastructure projects. Key duties include: Fabrication and welding of medium to heavy steelwork Working from engineering drawings Maintaining high quality and safety standards Supporting rail and infrastructure engineering projects What We're Looking For Experienced or qualified Fabricators and/or Welders Background in medium to heavy structural steelwork Ability to work from technical drawings...

Local candidates only please, client not supplying digs*** 10 hour day shifts Mon-Fri / weekend TBC Pipefitter required for site work in Accrington. * 3 months work initially, with the possibility of longer-term work * Industrial/site installation work Requirements: * Valid in-date CSCS or CCNSG card essential * Previous site experience preferred * Able to work independently and as part of a team Pay Rates (CIS or Umbrella only): * Monday to Friday – First 8 Hours: £26.25/hr * Monday to Friday – After 8 Hours: £36.75/hr * Saturday AM – First 5 Hours: £36.75/hr * Saturday PM / Sunday / Bank Holidays: £47.25/hr ***Local candidates only please, client not supplying digs

Pipe Welder – Site Work – Accrington Pipe Welder required for site work in Accrington. * 3 months work initially, with the possibility of longer-term work * Industrial/site welding work Requirements: * Valid in-date CSCS or CCNSG card essential * Previous site welding experience required * Able to work independently and as part of a team Pay Rates (CIS or Umbrella only): * Monday to Friday – First 8 Hours: £26.25/hr * Monday to Friday – After 8 Hours: £36.75/hr * Saturday AM – First 5 Hours: £36.75/hr * Saturday PM / Sunday / Bank Holidays: £47.25/hr ***Local candidates only please, client not supplying digs

Job Title: NRSWA Inspector Location: North East of England Contract: Initial 6-Month Contract Rate: £25 -£30 per hour dependent on experience Vehicle: Company Van Provided Job Overview: Our client in the North East of England is seeking a NRSWA Inspector to join their team on an initial 6-month contract. The role offers a competitive rate of £30 per hour and includes a company van for site travel. This position is well-suited for individuals with experience in street works inspection, compliance, and utilities, looking for a hands-on role with varied responsibilities across a busy road network. Key Responsibilities: ·Inspection of Works: Conduct daily inspections of street and road works, including those carried out by utility companies and other contractors, to ensure compliance with  regulations and safety standards. ·Internal Works Monitoring: Inspect works including pothole repairs and footway resurfacing. ·Inspection Management: Utilize provided tablet to record...

Working here isn’t just a job. You can advance your career at Avove, and we’ll reward you with a range of benefits that recognise great work. We provide full training and continuous development to help you reach your potential. We strive to create an inclusive working environment where everyone can be themselves. Join us and take the next step towards a fulfilling career. About the role… Join Avove at an exciting time of growth, where you’ll have the opportunity to play a pivotal role in delivering high-profile strategic projects that truly make an impact. As a Senior Project Manager, you’ll lead critical contract mobilisations, transformation programmes and change initiatives from concept through to implementation, helping to shape future-ready processes that drive success across the business. This is a fantastic opportunity for a passionate and forward-thinking leader who thrives on challenge, enjoys influencing change, and wants to be part of a team empowered to think...

Steel Assembly Operative Location: Crook, County Durham Pay Rate: £13.50 per hour Hours: Monday to Friday, 7:00am starts Overtime: Regular overtime available paid at 1.5x rate We are currently recruiting for an experienced Steel Assembly Operative to join a busy and growing manufacturing company based in Crook, County Durham. This is a hands-on role assembling pre-fabricated and pre-drilled sheet metal components using nuts, bolts, screws and hand tools. The position offers excellent earning potential through regular overtime opportunities. Duties & Responsibilities * Assembling pre-fabricated sheet metal components to engineering drawings and specifications. * Using nuts, bolts and screws to build steel assemblies. * Operating impact drivers and other hand tools safely and efficiently. * Using metal grinders to prepare and finish components. * Measuring materials and completed assemblies using tape measures. * Carrying out quality checks to ensure...