16 jobs found in Newham Hall

HSE Inspector Location: Wallsend Hours: 42 hours per week Rate: £27.50 per hour (PAYE) We are currently recruiting for an experienced HSE Inspector to join a busy fabrication operation in Wallsend. This is a hands-on role, ideal for someone who enjoys being visible on the shop floor and actively driving positive health, safety and environmental behaviours. Your most important tasks * Hands-on role based within an office in the fabrication hall, working closely alongside Supervisors. * Regularly walking the hall with a focus on influencing behaviours and building a strong HSE culture. * Overseeing Supervisors and the wider workforce from an HSE perspective. * Managing any issues relating to noise complaints from neighbouring properties, including taking appropriate mitigation measures and stopping certain works where required. * Liaising with the client, including potential involvement in weekly joint client inspections. *...

We are currently recruiting for welders for a very busy client in Newcastle. Looking for welders capable of passing a 6G welding test in Flux Core MIG. The Rates for this role are • £23.50 on 7am till 4pm • £26.02 on 4pm till 1am **PAYE – on top of the above rate, you will receive holiday pay for every hour worked. To be withdrawn when holidays are booked or paid out at the end of your assignment. In addition: The role is based on a 42-hour working week, however from 38 you’re are paid time and a third for any hours Monday to Friday. Meaning you are getting a guaranteed four hours of overtime. As well as during the week overtime is also available at time and a half on a Saturday or double time Sunday. Overtime is frequent and you will have the opportunity to bolster your wages with significant extra hours. There is even the opportunity for a permanent role. For more information or to apply please email you CV or call Ashton or Lewis at CDM

Job Title: Experienced Mechanical Fitters – Mechanical Assembly Location: Wallsend PAYE Rate: £21.50/hour (rising to £23.50/hour after training) Hours: 42 hours/week We are currently seeking experienced Mechanical Fitters to join a long-term project involving the assembly of Suspended Internal Platforms (SIPs). This is a mechanical assembly role and we are looking for strong assembly experience, previous use of bobtail techniques and the ability to read and work from engineering drawings. Requirements: • Proven experience in mechanical assembly/fitting • Relevant qualification in Mechanical Assembly or Mechanical Engineering • Ability to read and interpret engineering drawings • Familiarity with Bobtail techniques • Able to work at height • Reliable and committed to completing project Pay & Progression: • Starting rate: £21.50/hour PAYE • After training : £23.50/hour PAYE • 42-hour working week How to Apply: If you're an experienced Mechanical Fitter with a background in...

Senior Civil Engineer (Contract) Newcastle (Hybrid Working) Highways & Drainage | Residential Development A well-established UK civil engineering consultancy is looking to appoint a Senior Civil Engineer on a contract basis to support a growing workload of residential development projects. This role suits an experienced roads and drainage engineer who can operate with a high degree of autonomy while working collaboratively within a design-led consultancy environment. The role Lead the highways and drainage design for residential developments Deliver work from feasibility and planning through to detailed design and construction support Prepare and review technical drawings, calculations and reports Manage and coordinate S38, S278, S104 and S106 approvals Liaise directly with local authorities, water companies and project stakeholders Provide technical input and oversight to junior engineers and technicians About you Strong background as a Senior Civil Engineer...

British Nationals only. You must either already hold SC or be able to obtain SC Carbon60 is seeking a talented Software Engineer to join their clients forward-thinking Agile Scrum team based in Newcastle. As a Software Engineer, you will be responsible for developing high-quality, scalable, and easily maintained code using Java and related technologies. The Software Engineer will be involved in every stage of the software development lifecycle, from initial design through development, testing, and deployment. You will contribute to quality assurance by writing unit and automated tests, and participate in design and code reviews to ensure coding best practices, security, and scalability. For this position you can be based on either the Newcastle or Guildford site. Which ever site you are based on, there may be occasional travel to the other site. Key Responsibilities: - Develop reusable patterns and encourage innovation to enhance team velocity - Contribute to Agile processes,...

CDM are currently recruiting for Application Technicians for a client based in Newcastle Upon Tyne. The application technicians are responsible for all of the final testing of systems, once they are built. You will be responsible for testing all fibre optic systems as well the electrical lines, hydraulic and pneumatic lines. You will do this with continuity testing, to make sure that all those systems are working throughout the entire product. You will also carry out hydrostatic high-pressure testing. Up to 2 years worth of training will be provided with all the various forms of testing. You will be working in a heavy engineering environment, which is very clean, modern, quiet and slow paced. You are also given a lot of autonomy to work within your small team as our client doesnt believe in having to micro-manage people. This position is a long-term agency role, which we would expect to last for at last 4 years of consistent work. You may also be offered a permanent role at some...

Time-served electrician required for a commercial project in Newcastle City Centre. 40hrs a week until the end of Jan 2026

Position: Stores Coordinator Location: Newcastle Salary: £17.60 per hour Shift: Day Shift – 8:00 AM to 4:00 PM CDM are currently recruiting a proactive and detail-oriented Stores Coordinator to join our clients team in Newcastle. This role is vital to the effective storage, movement, and control of hardware within operations, ensuring all hardware and project-related items are properly tracked and delivered on time. As the Stores Coordinator, you will be responsible for overseeing the storage and movement of hardware from delivery to site, ensuring timely dispatch and resolution of any issues that may arise. You’ll be working closely with multiple departments and external logistics partners to ensure smooth operations. Main Duties: * Central Point of Contact: Serve as the primary point of contact for all hardware and project-related items held in inventory. * System Control: Ensure all hardware and project items are accurately tracked through the system, recording...

Plumber / Pipefitter – Contract – Hexham Location: Hexham Pay Rate: £25 per hour Hours: 38 hours per week (Monday–Friday) Start Date: ASAP Job Type: Temporary Contract Duration: 4-5 months Overview We are currently recruiting for an experienced Plumber / Pipefitter to work on a contract basis within a medical environment in Hexham. This role involves maintenance work within a plant room, including changing air filters and working on air handling units. Key Responsibilities * Carry out plumbing and pipefitting maintenance tasks * Work safely within a live medical facility * Replace air filters and maintain Air Handling Units * General plant room maintenance Requirements * Valid CSCS or JIB card * Proven experience in plumbing/pipefitting * Ability to work independently and safely

Example Recruitment Group have got an exciting opportunity for a Domestic Gas Service Engineer to join their team in Gateshead on a contract without an end date. Guaranteed work of 8-10 jobs per day doing LGSR`s at £25 per job. The Role: Servicing within domestic housing association properties All appointments pre-booked Very high access rate Up to 50 LGSR`s per week on a regular basis on Vaillant Eco-Tech Pro and Worcester 30i boilers Contract without an end date 26/9 regulations checks of gas boilers and appliances Working in Gateshead only Requirements: Experience in servicing gas boilers and appliances ACS qualifications required: CCN1, CKR1, HTR1 and CENWAT or CEN1 and WAT1 Gas Safe registration in your own right Public Liability Insurance - £2,000,000 Full UK Driving Licence and van Flue Gas Analyser (fully calibrated) Clean Disclosure Scotland If you are a Domestic Gas Service Engineer and want to work on a contract without an end date providing work all year round...

Example Recruitment Group are currently recruiting on behalf of a national heating contractor operating within the local authority sector. They require self-employed heating engineers for a long-term Housing Association contract on the Scottish Borders. Contract Details: Location: Scottish Borders Contract: Housing Association Work Type: Installations Commitment: Minimum of 3 set days per week Contract Length: April 2027 Payment terms: Weekly one week in arrears. Rates: Full Systems 4 Rad Solution £637.50 5 Rad Solution £658.75 6 Rad Solution £680 7 Rad Solution £701.25 8 Rad Solution £722.50 9 Rad Solution £743.75 Key Benefits: * Local work * Weekly pay – no chasing invoices * Flexible workload (3 days per week minimum) * All jobs pre-surveyed and booked in * Full PPE and kit provided * Long-term contract Requirements: * 2 years of qualified experience as a heating engineer * ACS Qualifications * Gas Safe Registered * Panel van with...

Overview We are seeking a skilled Fabricator to join our dynamic team. The ideal candidate will possess a strong background Welding and Fabrication, with the ability to work with steel plate up to 200mm. This role requires MIG Welding experience and proficiency in using hand/power tools and cutting torches Duties * Weld and Fabricate heavy steel plate according to specifications and engineering drawings. * Perform Welding tasks using MIG Welding techniques, ensuring high-quality Welds that meet industry standards. * Utilise hand/power tools and cutting torches for cutting, steel up to 200mm thick * Conduct inspections of finished products to ensure they meet quality control standards. * Maintain a clean and safe working environment by following health and safety regulations. * Collaborate with team members to optimise production processes and improve efficiency. Qualifications * Time served Welding and Fabrication * Proven experience in and Welding and...

Time-served pipefitters required for long term work in Sunderland. Must have CSCS and preferably IPAF. £26 ph x1.5 after 40hrs M-F x2 Saturday & Sundays

Velocity UK Ltd are currently seeking a skilled Fabricator/Welder to join their Manufacturing and Maintenance Team manufacturing road repair equipment. The role is offered as a 6 month fixed term contract with the possibility of a permanent role for the right candidate. Working as a key member of a small team the ideal candidate will have strong background in Fabrication and Welding and be able to cut, fit/plate and MIG weld mild steel structures from thin sheet up to 10mm thick. The role will comprise of manufacturing metal parts and welded assemblies for new machinery and carrying out repairs and upgrades to existing machinery. Skills and Experience Experienced in MIG welding small to medium mild steel components Experience working with hand and power tools Experience using general fabrication workshop equipment Ability to read engineering drawings and manufacture parts from them Ability to follow written or verbal instructions Able to measure, cut, drill and assemble work to...

Orbital Recruitment are currently looking for an experienced MIG Welder for our client based in Birtley/Sunderland Duties: Mig Welding and Fabricating Experience Needed/ About You: Must be time served Mig Welder. Own transport is essential as work may be between 2 sites. Pay/ Salary: £19.00ph CIS £21.50ph CIS Nights Overtime @ x1.5 Overtime @ x1.66 Hours & Contract Type: Days 7:30 – 16.30 Mon - Thu 07:30 – 12 Fri Nights 21:00 - 07:30 Mon - Thu The Next Step: * If you think this would be a great fit for you then APPLY NOW. * Don't forget to follow us on Facebook for the latest updates on new jobs roles, events and more

Job Title: Fabrication Welder Location: Birtley Hours: Monday to Friday, full-time We are looking for an experienced Fabrication Welder to join our team. The ideal candidate will be skilled in MIG, TIG, and MMA welding, able to work independently or as part of a team, and committed to producing high-quality work. Requirements: Proven experience as a fabrication welder Competent in multiple welding processes (MIG, TIG, MMA) Ability to read and interpret technical drawings Reliable and punctual, available Monday to FridayBenefits: Competitive pay Opportunities for overtime Friendly, supportive working environments96 About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting...