55 fettler jobs found

PLATER / WELDER – Temp 1 Month We are recruiting for an experienced Plater/ Welder to work for our client who are located in Rotherham, South Yorkshire. THE DUTIES OF A PLATER / WELDER: * Read and interpret engineering drawings. * This is a temp role for one month – may be extended. * Mark out, cut, and prepare heavy steel plate for fabrication using tools such as plasma cutters and grinders. * Inspect and check completed work to ensure structural integrity and compliance with safety standards. * Collaborate with welders, machinists, and other workshop personnel to meet production deadlines. ESSENTIAL EXPERIENCES & SKILLS: * Minimum 4 years' experience working within a high precision manufacturing background * Excellent communication skills THE HOURS: · Standard working hours: 40 hours per week 8:00am - 4:30pm Can be flexible if needed. THE PAY: You will earn an hourly rate between £14 - £18 an hour depending on experience. Questech Recruitment is a...

We are currently recruiting Electrical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures. Responsibilities. Installation, maintenance, and fault finding while adhering to health and safety regulations. Experience in electrical fitting, and preferably in a transport or safety-critical environment. General electrical wiring and assembly. Reading and interpreting engineering and wiring diagrams. Completing point-to-point testing and verification.Requirements: Previous experience as an Electrical Fitter or similar role Knowledge of vehicle electrical assembly, repair, and maintenance techniques Ability to work effectively in a team environment Strong attention to detail and quality craftsmanship Level 2 qualification or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME,...

We are currently recruiting Mechanical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures.  Key Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair components. To be able to fault find and carry out diagnostic investigation work. To overhaul of rail components. To undertake training as and when required. To work within a realistic timeframe. To ensure that waste is disposed of in the correct manner. To adhere to written or verbal instructions.Requirements: Previous experience in mechanical roles, or a similar hands-on trade/engineering environment. Confident in the use of hand tools, power tools, and workshop machinery. Strong attention to detail with the ability to read and follow technical instructions. Commitment to working...

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing,...

ROLE: PVC PIPE FITTER LOCATION: SKELMERSDALE, LANCASHIRE PAY RATE: £20 - £21 per hour (depending on experience), overtime rate is set at time and a half of standard pay rate, up to 10 hours overtime available per week HOURS OF WORK: 7am – 4.30pm, Monday to Thursday and Friday 7am – 12pm. 30 mins unpaid lunch break. Overtime is paid after 42 hours. HG Recruitment are recruiting a temporary PVC PIPE FITTER in partnership with our client based in SKELMERDALE, LANCASHIRE. Apply Now – Join our team and start earning top rates. If you are an PVC PIPE FITTER - APPLY NOW - For more information, please contact our team on (phone number removed) or e-mail (url removed) ****Estimated weekly pay based on 40 hours £840*** ****Expected annual earnings £43,680 ****** PCV Pipe Fitter responsible for the Assembly and Installation of pipework in the workshop and onsite. Our client is a well-established Engineering business based in Skelmersdale, specialising in the bespoke design, build,...

CNC Setter/Operator Aldridge Day shift £14.50 - £16.00 per hour depending on exp CNC Setter Operator My client who is looking to recruit a CNC setter/operator to join the team. Duties of CNC Setter Operator: Set and operate  Read technical Drawings Ability to quality check own work Experience of using Verniers Troubleshoot Familiar with Fanuc Controls

Skilled Mechanical Assembly Fitters – 12-Month Contract | Wortley, Leeds Pay: £34,717 per year | Benefits: annual bonus, 33 days annual leave, enhanced pension, health cash plan, free parking Are you an experienced mechanical fitter who enjoys assembling and testing complex machinery? Join a global engineering leader and put your skills to work on high-speed metal forming and finishing equipment! About the Company Our client is a world-class engineering company operating in 41 countries with an $8.5bn turnover. Known for innovation and excellence, they have proudly received The Queen’s Awards for Enterprise in International Trade, Innovation, and Sustainable Development. The Role Based in Wortley, Leeds, you’ll play a key role in assembling and testing OEM machinery. Your responsibilities will include: * Assembly and testing of machinery to meet customer requirements * Delegating and supporting semi-skilled colleagues on non-complex tasks * Carrying out Operator Asset Care...

Pipe Welder / Pipe Fitter 📍 Sheffield – S9 💰 £16.00 – £18.50 per hour (DOE) 🕒 Monday – Friday | 08:30 – 16:30 | Day Shift We are currently recruiting for an experienced Pipe Welder / Pipe Fitter to join our client based in Sheffield (S9). This is a long-term opportunity for someone who takes pride in producing high-quality fabrication work and enjoys working on a variety of bespoke and production-based projects within a busy workshop environment. 🔧 Key Responsibilities * Fabricating and fitting pipework to drawings, isometrics, and schematics * TIG/MIG welding on stainless steel and carbon steel pipework * Cutting, bending, threading, and assembling pipe systems * Carrying out tack welding, full welds, and finishing work to a high standard * Using hand tools, power tools, and workshop machinery safely and effectively * Working to tight tolerances while maintaining high quality standards * Reading and interpreting...

Job Title: Mechanical Fitter Location: Barton Under Needwood, Staffordshire Duration: Contract ( 3 months min) Rate:TBC Working Hours: * Monday to Thursday - 07:00 to 16:00 * Friday - 07:00 to 13:00 * Overtime is available. We are currently recruiting for a number of Mechanical Fitters for contract work based in Barton-Under-Needwood working for a large engineering company. Own transport is recommended due to the location. Key Duties & Responsibilities: * Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace * Ensure all Health and safety obligations are met, and company policies are adhered to * Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence * Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company's ISO...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 4pm Monday to Thursday and 7am till 1pm on a Friday Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a realistic timeframe. To mentor trainees / apprentices when applicable. To ensure that waste is disposed of in the...

Job Title: Mechanical Fitter Location: Barton Under Needwood, Staffordshire Duration: Contract ( 3 months min) Rate:TBC Working Hours: * Monday to Thursday - 07:00 to 16:00 * Friday - 07:00 to 13:00 * Overtime is available. We are currently recruiting for a number of Mechanical Fitters for contract work based in Barton-Under-Needwood working for a large engineering company. Own transport is recommended due to the location. Key Duties & Responsibilities: * Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace * Ensure all Health and safety obligations are met, and company policies are adhered to * Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence * Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company's ISO...

Electrical Fitter - Temporary with the potential to become permanent - Immediate Start Corby - Northamptonshire UK £28,500 - £32,500 per annum Monday to Thursday 07:30 - 16:30 Friday 07:30 - 13:30 Are you looking for a hands-on role where quality matters? We are currently looking for people who have previously worked as Electrical Fitters, Electrical Technicians, Engineering Fitters or Electrical Engineers to join a well-established engineering company. Our client has over 20 years' experience producing premium, durable products that help customers work smarter, safer, and more efficiently. Due to the nature of this position, candidates are required to be resident in the Corby area with Right to Work Documentation in place as initially this is a temporary role with an immediate start. The Role Electrical fitting and assembly work in accordance with the drawings and instructions provided. Assemble electrical components including motorised units and industrial junction boxes...

Job Title: CNC Miller Location: Coventry CV5 Salary: £39,000 to £42,000 per annum Shift: Day Shift Join Our Dynamic Machine Shop Team in Coventry! We are a leading company in the precision engineering sector, committed to producing high-quality components that meet the most demanding customer specifications. Our focus is on quality, efficiency, and innovation, making us a preferred partner for clients across various industries. We're looking for a talented CNC Operator to join our skilled team, ensuring that all products meet exacting standards and are produced in a timely manner. Your Role: * Operate CNC Milling machines to manufacture high-precision components. * Load and unload parts, ensuring correct handling and placement. * Conduct quality inspections of parts using micrometers, Vernier calipers, and other gauges. * Work from engineering drawings, adhering to BS/ISO standards. * Collaborate closely with the Team Leader and Quality Departments to meet project...

This is a hands-on role, ideal for someone with experience in building electro-mechanical assemblies and working with both mechanical and electrical components. You'll be responsible for assembling, inspecting, testing, upgrading and repairing assemblies in accordance with technical drawings, Standard Operating Procedures (SOPs), and Customer Manufacturing Manuals (CMMs), ensuring all work meets quality and functional standards. Key Responsibilities Assemble small electro-mechanical components according to technical drawings, SOPs, and CMMs. Use hand tools and measuring equipment such as torque drivers, micrometers and verniers. Perform assembly tasks including drilling, tapping, reaming, countersinking, filing, lapping, buffing, and lubrication. Connect cables and wires following technical specifications. Conduct tests and inspections to identify, troubleshoot, and resolve any product issues. Maintain the equipment used in electronic assembly processesRequirements Ability to...

BMC Recruitment Group is currently recruiting for a Mechanical fitter to join a distinguished manufacturing company based in the North East. Pay rate = £17.00 per hour Duties/Responsibilities Manufacture and assemble company products in line with customer specifications and quality standards Collaborate with Engineers to ensure all project and Engineered to Order production activities are completed accurately Interpret 2D drawings and 3D models (both paper and Catia 3D Models) for mechanical assembly requirements Participate in project testing processes, including pressure testing and full functional tests Identify and resolve issues during the assembly and testing phases, following proper escalation and documentation procedures Operate standard tools and machines such as pedestal drills, band saws, grinders, and pipe threading machines - Use specialist lifting equipment to ensure safe manufacture and assembly of packaged pump houses Adhere to safety, quality,...

Job Title: Mechanical Fitter (Conveyor Installation) Location: Shirebrook, Mansfield  Start Date: WC 09.03.26 Duration: 4 Weeks Hours: 50 hours per week (Mon–Fri) Job Overview We are seeking 2 experienced Mechanical Fitters to support a conveyor installation project at a large distribution facility. The successful candidates will have proven experience installing mechanical conveyor systems. Experience with Interroll conveyor systems is highly beneficial. Working Hours Monday – Thursday: 7:00am – 5:30pm Friday: 7:00am – 3:00pmOperatives must arrive at the onsite car park by 6:40am to allow a 20-minute walk across site in order to sign in at 7:00am. The same walk-out procedure applies at the end of shift (sign-out at 5:30pm). Key Responsibilities Installation and assembly of conveyor systems Mechanical fitting, alignment, and bolting of components Reading and interpreting technical drawings Ensuring installations meet quality and safety standards Working collaboratively with...

Pipefitter / TIG Welder – Up to £23/hr + Overtime! 💥 Location: Central Belt (occasional travel outside area) Payment Options: CIS | PAYE | Umbrella We’re on the hunt for a skilled Pipefitter / TIG Welder to join exciting projects in distilleries, breweries, waste-to-energy & food processing sites! What You’ll Be Doing: * Pipefitting & TIG welding to coded standards (Weding experience prefered but not essential) * Working on thin-wall metric & hygienic stainless, plus schedule stainless & carbon steel * Site work across the Central Belt (with some travel) * Flexible overtime & weekend work Why You’ll Love This Role: * Temp-to-perm opportunity with company van on permanent transfer * Competitive pay: Up to £23/hr + enhanced overtime * Flexible payment options: CIS, OR Umbrella * Join a trusted recruiter with 20+ years in Construction, Industrial, Rail & Engineering Apply Now! Submit...

MPI require a Mechanical Fitter to work on a long term contract basis, for our client based in Kempston 40 hours per week Mon - Fri 7:00am – 15:30pm, with half hour lunch break but this can vary when working on client sites Our client is an established manufacturer of water processing equipment, based in Bedford. They require a skilled mechanical fitter to assist with installations of equipment on client sites. The role will involve travelling to client sites and assisting an engineering team with the installation of a wide range of processing / treating equipment. Experience of working on Water Treatment works is always an advantage. ESSENTIAL CSCS Card – Green (as a minimum) Blue or Gold SSSTS or SMSTS EUSR (water Hygiene) Confined Space PASMA (Scaffold Towers) First Aid JOB PURPOSE To work safely at all times and to always consider the safety of others in anything they do. To deliver mechanical services on defined projects. To take instruction from a team leader. To...

CNC Setter / Operator    Location: Leicester LE4 Beaumont Leys    Hours: Monday to Thursday 14.30 - 23.00and Friday 14.30 - 20.00   Payrate Interviews Happening Immediately   Are you a skilled CNC Turner setter/operator looking for your next opportunity?   We're working with a well-established and growing engineering firm in Beaumont Leys who are looking to add to their friendly team. This role offers great rates of pay, steady afternoon shifts, and the opportunity to go permanent for the right person.   What You'll Be Doing Working from detailed engineering drawings Setting and operating a CNC Turning Machine  Setting using Fanuc controls  Reporting to the Fabrication Manager Occasionally working independently on varied jobs and materials What We're Looking For An Experienced CNC Setter/Operator on CNC Turning Machines  Strong background in using Fanuc controls  Confident in reading technical drawings 2+ years of experience working within an engineering...

CNC Setter/Operator Leicester, LE4 £14.50 per Hour We are working with a world-leading engineering company that prides itself on proving the highest quality bespoke products for the heavy plant industry, in the UK and globally.  We are looking for a CNC Machine Setter/Operator to operate CNC Turning Machines with Fanuc/Mitsubishi controls. The role will involve setting up the machines for production , making adjustments as required and ensuring quality of products in line with the drawing provided.   Day/Hours of Work Monday – Thursday:14:30pm – 23:00pm Friday 14:30pm – 20:00pm   Rate of Pay: £14.50 per Hour   **Temp to Perm Opportunity**   The Role: Set CNC Turning machines for production and low batch quantities within allocated times Make adjustments to the machine settings as required Ensure quality expectations, as per drawing and planning are achieved Ensure allocated operation times are achieved Fill daily activity sheets Be aware of and observe personal health...