45 manufacturing project engineer jobs found

Manufacturing Project Engineer Desford (Site based) Initial 6 month contract (likely to be extended) 37.5 Hours a week Mon-Fri Are you a hands on Manufacturing Engineer with strong project delivery capability to support and lead a portfolio of containerisation improvement initiatives? Are you comfortable working on the shopfloor and engaging directly with operations? Do you take ownership of problems and drive projects through to resolution? If so, this could be a great opportunity for you… Manufacturing Project Engineer Responsibilities * Project delivery - Lead and deliver containerisation-related projects from current status through to implementation * Hands-On Manufacturing Engineering - Actively support and implement process improvements on the shopfloor, support installation, commissioning, and optimisation of new equipment and tooling, and review current processes and identify opportunities * Process Development & Stability - Establish robust, repeatable...

Location: Desford (Fully Site-Based) Pay Rate: £25.20 - £35.20 per hour (Dependent on Experience) Salary Equivalent Comparator: £41,593 per annum Working Hours: 37.5 hours per week (Standard Hours) Key Benefit: 35 Days Holiday Entitlement About the Role Are you a proactive, delivery-focused Manufacturing Engineer who thrives on being on the shop floor rather than stuck behind a desk? We are seeking a hands-on Manufacturing Project Engineer to support and lead a portfolio of containerisation improvement initiatives at our world-class manufacturing facility in Desford. This role perfectly combines practical engineering execution with project management responsibility. You will focus on implementing robust processes to support increasing operational output, eliminate process variability, and improve efficiency across the containerisation footprint. Key Responsibilities Project Delivery: Lead and deliver containerisation-related projects from their current status through to...

Process Project Engineer – Moulding / Manufacturing Role Exciting new role with our client a multinational Medical Device and Healthcare products provider. NIRAS is actively recruiting for an energetic and hands-on Manufacturing/Project Engineer to lead a key project within our Client’s Advanced Manufacturing Engineering & Process Development Team. You will work closely with Engineering, Manufacturing, Quality, R&D and Sustaining departments in the development and delivery of new process layouts, innovative automation solutions, improvement of lean processes necessary to produce components for an advanced medical device product. You will have proven problem solving, supervisory, technical ability, be approachable and able to build teams and collaborate with multi discipline teams with ease. You will be curious and questioning and establish risks and pitfalls to ensure surprises are minimized. You are an effective and able communicator, working at all levels of the...

The Senior Electronics Engineer will be expected to set the standards of good engineering practice and be seen as an expert in their given field. You will need to be able to obtain UK Security Clearance. ​Key Responsibilities: * Working in technology areas of EMC, Power Management, Servo Control, processor interfacing and communications * Lead the design and development of electronic circuits and multi-layer PCB layouts for new and existing products * Maintain and update existing PCB designs, ensuring performance, manufacturability, and compliance standards are met * Manage electronic component obsolescence, including: * Monitoring lifecycle status of components * Identifying and qualifying alternative components * Implementing redesigns where necessary * Liaise with suppliers and external partners on component selection and technical issues * Support production and manufacturing teams with technical queries, root cause analysis, and issue...

Job Title: Mechanical Design Engineer Duration: 2 Month Contract  Start Date: ASAP Location: Fully onsite in Camberley, Surrey Rate: Hourly rate open to discussion Mechanical Design Engineer Overview We are recruiting on behalf of a specialist engineering business operating within the aerospace and industrial engineering sectors for an experienced Mechanical Design Engineer to support a range of complex projects on a contract basis. The role will involve the design and development of bespoke mechanical systems, test facilities, and associated equipment, producing detailed 3D models and engineering documentation while working closely with project delivery teams. This is an excellent opportunity to contribute to technically challenging projects from concept through to implementation. The Mechanical Design Engineer role will involve: Creating detailed 3D CAD models and engineering drawings Developing bespoke mechanical and industrial equipment designs Producing technical...

Job Title: Advanced Quality Engineer                                                       Location: Buckingham Pay Range: Competitive   Contract Type: Contract  A leading automotive manufacturer supplying high‑end lighting systems to luxury and supercar brands is seeking an Advanced Quality Engineer to join its NPI Quality team. This role plays a key part in ensuring flawless new product introduction, driving APQP activity, and delivering robust BEON/PPAP submissions across multiple customer programmes. This is an excellent opportunity to join a business undergoing significant investment and transformation, offering the chance to influence quality performance at every stage of the project lifecycle. Key Responsibilities – Advanced Quality Engineer Coordinate and control all APQP documentation through to PPAP approval for new programme launches. Execute PPAP submissions for customer‑driven and internal engineering changes. Interpret and apply customer‑specific PPAP...

We are looking to recruit a Project Engineer to support a major capital project involving the introduction of a new production line within a regulated medical manufacturing environment.   This position will be joining our thriving UK medical device manufacturing company to work within our Site Services Department.    The successful candidate will play a key role in the technical delivery of the new production line, ensuring equipment and systems are specified, installed, commissioned, and validated in accordance with regulatory requirements, quality standards, and project timelines.   The role provides exposure to suppliers, manufacturing equipment, and cross-functional collaboration across engineering, quality, and operations teams.   Essential Experience/Qualifications  Experience in engineering roles supporting capital equipment or production line projects Experience with equipment specification, installation, and commissioning Experience working in a regulated manufacturing...

Senior Manufacturing Engineer Peterlee (Site based) 12-month contract 36.5 Hours a week Mon-Fri 7:30am-4pm (there is some flexibility around these hours) As a Senior Manufacturing Engineer, you will have the opportunity to provide the technical expertise necessary to design, develop, and implement manufacturing systems, complex manufacturing operations and sophisticated machines. You will contribute to the planning and delivery of projects, continually learn and stay abreast of innovative technology, mentor and coach team members, whilst broadening your professional network. Senior Manufacturing Engineer Responsibilities * Developing, analysing and managing Manufacturing / Fabrication / Paint / Assembly Projects. * Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. *...

Base Engine Development Engineer Peterborough – fully on site PE1 Initially 12 months – very long term extensions are highly likely £31.50ph PAYE + holiday + pension or £42.75 umbrella rate We’re excited to be recruiting for this opportunity with a global engineering manufacturer. The team is responsible for supporting both new product introduction (NPI) and existing engine platforms, working across a range of component revisions and development activities as designs progress from concept into validation and production. This is a hands-on engineering role focused on supporting engine development, validation, and lifecycle improvement within a close-knit, collaborative team environment. Key Responsibilities * Support engine development activities across core base engine systems and components * Work on both NPI programmes and existing product improvement projects * Support design phase activities through into development and validation * Assist with testing and...

Mechanical Systems Installation Design Engineer Location Filton, Gloucestershire, South West England Job Type Contract – Full-Time hours Primary Industry Aerospace and Aviation Secondary Industry Engineering Job Description The Mechanical Systems Installation Design Engineer is responsible for the design, development and integration of mechanical systems within aerospace platforms. This role focuses on producing detailed installation designs that ensure mechanical systems are effectively and safely incorporated into aircraft structures, meeting stringent industry standards and regulatory requirements. The successful candidate works closely with multidisciplinary teams to translate conceptual designs into practical, manufacturable solutions while maintaining compliance with quality and safety protocols. Key Duties and Responsibilities Develop, review and produce detailed mechanical installation designs for aerospace systems in accordance with project requirements and...

Certification Engineer - Initial Airworthiness Location: To be confirmed Job Type: Contract, full-time hours Primary Industry: Aerospace and Aviation Secondary Industry: Engineering Salary: £50 - £55 per hour Benefits: None Job Description The role of Certification Engineer - Initial Airworthiness is to ensure that aerospace products comply with applicable airworthiness standards and regulatory requirements throughout the development and certification phases. The post holder is responsible for planning, coordinating, and executing certification activities related to initial airworthiness, supporting the successful introduction of aircraft or components into service. This includes liaising with certification authorities, reviewing technical documentation, and managing compliance evidence. Job Duties Develop and implement certification plans and strategies for initial airworthiness in accordance with relevant regulatory frameworks. Analyse and interpret airworthiness...

Job Title: Development Engineer (Base Engines) Location: Peterborough (Fully Onsite) Salary Equivalent: £49,519 per annum Contract Length: 12 Months Working Hours: Monday to Thursday (08:30 - 16:45) & Friday (08:30 - 16:15) About the Role Join a global leader in manufacturing and engineering as a Development Engineer within the Component Engineering Base Engine Team. This position comes at a time of significant investment in clean-sheet engine designs to meet an ever-changing global energy landscape. In this role, you will act as a key technical contributor, focused on developing and validating design solutions for New Product Introduction (NPI) projects, new technologies, and updates to existing engine platforms. Working in a collaborative, supportive 9-member team, you will interface directly with global manufacturing sites, suppliers, and customers. Key Responsibilities Validation & Testing: Lead, plan, and execute core engine system validation activities,...

TeamJobs is recruiting an experienced Advanced Electrical Engineer (Electronics) to support the design and development of advanced electronic controllers used within Environmental Control Systems and Life Support Systems for aerospace applications. You will join a multidisciplinary Electronic Controllers team, responsible for delivering high-integrity hardware integrated with specialised software to meet stringent aerospace and safety requirements. The successful candidate will have strong analogue and digital circuit design experience, ideally gained within aerospace or another highly regulated industry. Location: Yeovil, Somerset Employment Type: 12 month Contract (with potential for extension) Work Model: Hybrid - typically 3 days on-site and 2 days remote, with periods of increased on-site presence depending on project phase. 37 hours per week, Monday -Thursday 9am-4pm and finish at 12pm on Friday. Pay rate: around £72 per hour. Key Responsibilities Support the full...

Are you an experienced engineer with a passion for internal combustion engines and a track record of driving complex mechanical component development? A large global manufacturer based in Peterborough is undergoing a period of significant investment to meet the challenges of an ever-changing energy landscape. This is your chance to join a future-focused, world-class team and make a tangible impact on the next generation of industrial power systems! If you want to put your technical expertise to the test in a collaborative, global environment, we want to hear from you. Location: Peterborough (Office-based, 5 days per week) Contract Duration: 12-month contract Pay Rate: £25.39 - £32.30 per hour Hours: Monday to Thursday (8:30 AM - 4:45 PM), Friday (8:30 AM - 4:15 PM) Travel: Minimal (less than 5% if required) Your daily responsibilities will include: Executing Core Engine System validation activities and executing planned validation tests. Conducting Failure Mode and...

Role: Advanced Electrical Engineer (Electronics) Location: Yeovil, Somerset Employment Type: Hybrid Contract (Some project phases will require increased on-site presence) Rate: £60 - £65 per hour (PAYE only) plus holiday pay in addition Hours: 37 hours per week (flexible start/finish) ** We can only accept UK or NATO passport holders due to the nature of the work. Please DO NOT apply if you do not hold a UK or NATO passport. An opportunity is available for an experienced Advanced Electrical / Electronics Engineer to support the design and development of high-integrity electronic controllers used within Environmental Control Systems (ECS) and Life Support Systems for aerospace applications. You will join a multidisciplinary electronics team working on safety-critical hardware integrated with specialised software, delivering solutions across commercial, defence, and space aircraft platforms. The role is based at a well-established aerospace engineering and manufacturing site...

Engineering Administrator Location: Washington Salary: Negotiable Type: Temporary ongoing (long term) Hours: 38 hours per week – Mon – Thurs: 08:15am – 5:00pm – Fri 08:00am – 1:00pm Imperial Recruitment Group are working with a key client who are looking to recruit a Process Engineering Administrator on a temporary ongoing basis Main Purpose: The Contract Engineering Administrator is a temporary role designed to support the Contract Engineer and the wider Process Engineering team during a period of increased project workload. This position plays a key part in maintaining accurate documentation, coordinating project activities, supporting data migration tasks, and ensuring smooth communication between engineering, production, and other cross-functional departments. Responsibilities: Collaborate with cross-functional teams including production, maintenance, and IT to integrate automation technologies such as robotics, PLCs, and machine vision systems Ensure all Engineering...

Design Engineer - Aviation Structures (Rotary Aircraft) | 6-Month Contract | Yeovil Area Location: Yeovil, UK Contract Duration: 6 months (potential for extension) Start Date: ASAP We are seeking an experienced Design Engineer with a strong background in aviation structures and rotary aircraft design to join our team on a 6-month contract basis. This is an exciting opportunity to contribute to high-profile aerospace projects in a fast-paced and innovative environment. Key Responsibilities: Design and develop structural components and assemblies for rotary-wing aircraft. Produce detailed 2D and 3D drawings using AutoCAD. Conduct design reviews, stress considerations, and modification assessments. Liaise with cross-functional engineering and production teams to ensure design integrity and compliance. Support documentation and certification requirements for aerospace standards. Essential Requirements: Proven experience in rotary aircraft or aerospace structural design....

We are currently seeking an experienced Electrician for an exciting contract opportunity within a highly technical industrial and engineering environment based in Oxfordshire. This role offers the chance to work on complex electrical systems, plant upgrades, maintenance projects, and engineering improvements within a large-scale operational facility. The Role The successful candidate will provide electrical support across a range of operational and project activities. You will be involved in electrical design support, fault investigation, commissioning, maintenance planning, and technical problem solving within a safety-critical environment. Key Responsibilities Support electrical engineering and maintenance activities across site Provide technical expertise for electrical systems and infrastructure Assist with design reviews, modifications, and upgrades Carry out fault finding and root cause analysis on electrical equipment Support commissioning and testing activities Review...

Joining the Quality team and reporting to the Quality Manager, the Quality Engineer will be responsible for day-to-day Quality Assurance activity at both our Horsham and Plymouth sites, travelling as necessary. Typical activity includes ensuring we fulfil project milestones and customer design requirements as well as site-specific activity such as ISO 9001 requirements, and ESD and FOD precautions, new starter inductions and training. Key Responsibilities: Attending project/design gateway reviews and being the voice of QA within Customer-facing liaison on day-to-day quality issues and requirements, including customer witnessed testing both onsite and customer sites (if needed) Supporting the maintenance and continual improvement of the QMS in conjunction with process/function owners to ensure that the requirements of ISO 9001 are satisfied Conducting internal audits with process/function owners to monitor operation and effectiveness of the QMS and to facilitate continual...

Freelance Mechanical Engineer | Leamington Spa | 3 month Contract (may extend) Experienced Mechanical Engineer wanted for a 3 month ocntract with a Leamington Spa-based client. You'll act as the external design and project engineering function for a business with no in-house design team - taking ownership from concept through to manufacture. The role includes: Mechanical design & engineering support Managing projects through manufacturing delivery Client-facing involvement and stakeholder engagement Site visits across East Yorkshire & HumbersideIdeal for someone already freelancing or consulting, looking to add a solid project to their portfolio or replace a recently finished assignment. Candidates will likely already be doing something similar in a consultancy, contract, or freelance capacity. Coburg Banks Limited is acting as an Employment Business in relation to this vacancy