89 mot tester jobs found

Job Title: Contract Manufacturing Engineer - NPI Location: Loudwater, Buckinghamshire Salary: £40 to £50 per hour  Employment Type: Contract Working Arrangements: Onsite working IR35: This contract does not accept candidates operating through a Personal Service Company (PSC). Therefore, you will be required to work through an Umbrella company. Are you a Contract Manufacturing Engineer - NPI with strong experience in electromechanical product manufacturing, new product introduction, and low–medium volume, high‑value build environments? We have a 6-9 month contract on offer which gives you ownership of taking complex products from prototype through to stable, repeatable production. You’ll join a growing engineering and manufacturing function working on advanced electromechanical and electronic systems, where your work directly shapes how high‑value products are built, scaled, and industrialised.    The Role This is a hands-on Contract Manufacturing Engineer - NPI position...

Soldering Technician Swindon £13.00 per hour Our client is looking for a skilled and reliable Soldering Technician to join their growing team. This is an excellent opportunity to work for a well-established engineering manufacturer, producing high-quality cable and electrical assemblies. Soldering Technician Roles and Responsibilities: * Carrying out fine soldering to a high standard * Assembling cable and wiring products from engineering drawings and work instructions * Preparing cables, crimping terminals and completing wiring assemblies * Inspecting finished products to ensure they meet quality standards * Using hand tools and small assembly equipment * Working to production targets while maintaining a high level of accuracy * Following company quality procedures and health & safety guidelines * Maintaining a clean and organised work area Soldering Technician Ideal Candidate: * Previous soldering experience within an engineering, electronics or...

Safran Landing Systems is a global leader in aircraft landing and braking systems, serving commercial aviation, business travel, and military and defense fleets. We are committed to excellence throughout the entire product life cycle-from design, engineering, and manufacturing, to maintenance, repair, and overhaul (MRO). Your Role As a key member of our Laboratory team, you will play a vital role in supporting the quality and efficiency of our electroplating and chemical processes, ensuring compliance with process specifications, health, safety, and environmental legislation, and contributing to a culture of continuous improvement. Key Responsibilities Quality Management: Perform detailed chemical analyses and manage solution processes to ensure effective, efficient service and compliance with process specifications and COMAH regulations. Compile and publish vat analysis data, with a focus on salvage activity and electroplating (preferably Zinc Nickel). Health, Safety &...

Senior engineer, in our Hardware-in-the-Loop Team contract Stevenage based Skillset/experience required: Broad engineering experience with deeper experience in some of the following skill areas: Radio Frequency design or testing System performance analysis Interface debugging and system integration Software design requirements System design for real-time applications Familiarity with Linux operating system Familiarity with computer science (C++ an advantage) Integration of microcontrollers in RF hardware (e.g. Raspberry Pi)Overview of department: We are looking for ambitious engineers with a growth mind-set to join our team. If you are the right person for us, you will seek a supportive environment, surrounded by passionate experts while being a part of a collaborative and driven team. The Hardware-in-the-Loop (HWIL) team conduct the most complete test of missiles other than a firing and Missile test track. We design complex, real-time simulations that surround real missile...

Test Technician (Pressure Testing) | Rosyth | £££Excellent Avenue are recruiting for Pressure Test Technicians for our client at their world class subsea cable manufacturing facility in Rosyth. Requirements: Previous experience of working with pressure testing or in a similar role. An excellent awareness of Health & Safety in hazardous environments. Mechanically minded. Experience in the following is extremely desirable: mechanical strip down, building of components, excellent hand co-ordination, technical awareness, hydraulics, familiar with subsea equipment. An excellent attitude to work, learning and personal development. This role is on a shift rotation basis, Starting Monday 10th August. N.B. you will be required to pass a medical and drug & alcohol prior to starting work. Please call Alanna: (phone number removed) or apply with your most recent CV. INDTEMP

Fuel Cell Design Validation and Testing Engineer Location: Kemble, UK (on-site) Salary/Rate: £55 per hour, 6 month contract Shift Pattern/Working Hours: Standard working week, days This is a contract opportunity with a specialist engineering company working on next generation HTPEM (High Temperature Proton Exchange Membrane) fuel cell systems for electric propulsion applications. The business is scaling up its test and validation function and needs an engineer who can get stuck into stack testing straight away. You'll work closely with design, materials and systems engineering teams on a technology that's central to the future of hydrogen propulsion. This is hands-on work. You'll spend real time at the test bench, not just reviewing data from a desk. Key Responsibilities * Support design validation and verification (DV/V) plans for fuel cell components and assemblies * Plan and run performance, durability and reliability testing under varying operating conditions *...

We’re Hiring: Time Served Fabricators – Winsford 🚨 Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Fabricators. 🔧 The Role As a Fabricator, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate materials * Ability to work independently from...

We’re Hiring: Time Served Platers – Winsford 🚨 Please note: this is a local role only as accommodation is not provided Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Platers. 🔧 The Role As a Plater, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate...

Ambitek is currently recruiting for experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long-term opportunity offering excellent rates and consistent work for reliable and qualified welders. Key Responsibilities: * MIG welding of structural steel beams and end-plates. * Use of solid wire MIG in the down-hand position. * Perform 10mm T-joint multi-run fillet welds, including start/stop operations. * Work to engineering drawings and welding specifications. * Ensure all welds meet quality and safety standards. Requirements: * Proven experience in structural MIG welding (preferably in a fabrication shop). * Ability to complete a 10mm multi-run T-joint fillet weld to a high standard. * Must pass a trade test prior to starting. * Strong attention to detail and commitment to quality. * Local candidates only – accommodation is not provided....

Ambitek is currently recruiting for experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long-term opportunity offering excellent rates and consistent work for reliable and qualified welders. Key Responsibilities: * MIG welding of structural steel beams and end-plates. * Use of solid wire MIG in the down-hand position. * Perform 10mm T-joint multi-run fillet welds, including start/stop operations. * Work to engineering drawings and welding specifications. * Ensure all welds meet quality and safety standards. Requirements: * Proven experience in structural MIG welding (preferably in a fabrication shop). * Ability to complete a 10mm multi-run T-joint fillet weld to a high standard. * Must pass a trade test prior to starting. * Strong attention to detail and commitment to quality. * Local candidates only – accommodation is not provided....

Electronics and Instrumentation Technician Location: Peterborough (Fully Onsite) Pay Rate: £20-22.00 / hour Position Type: 12-Month Contract (Likely to extend) Working Hours: Mon-Thu 8:00 AM - 4:00 PM | Fri 8:00 AM - 3:30 PM Travel: None About the Role We are looking for a practical, hands-on Electronics and Instrumentation Technician to join a collaborative 11-person team. In this role, you will play a critical part in maintaining team capacity across a high variety of workstreams. You'll be involved in everything from calibration and preventative maintenance to breakdown repairs and project support. This position offers a strong learning curve with direct exposure to multiple disciplines across electronics, instrumentation, and maintenance. Key Responsibilities Perform calibration, maintenance, and breakdown repairs on precision instrumentation and control systems. Assemble, wire, and upgrade instrumentation panels to specified standards. Execute Total Preventative...

Our well -established client based in Keighley, West Yorkshire is looking for TIG Welders for immediate starts on tempoaray ongoing assignments. The ideal candidate must have previous TIG welding experience and will need to complete a weld test should they be selected to the next stage. Hours: Early Shift: 5.30am – 2pm Mon-Thurs, Fri 5.30am-11.30am = 38 hours per week Rate of Pay Dependant on experience This company is easily accessible by train or bus and has onsite free parking. Interested then please email your CV by selecting the “Apply Now” option and Call Stacey on 0/7/7/8/5/2/5/1/1/6/7 ( Welder / TIG Welder/ Factory / Manufacturing / Engineering / TIG Welder / TIG Welder / TIG Welder / Argon Welder ) ( Keighley / Shipley / Bingley / Bradford / Leeds / Colne / Nelson / Burnley / Skipton )

Senior Piling Engineer / Contracts Engineer  📍 Birmingham 📅 Initial 3-month contract (potential extension) We are currently looking to engage an experienced Senior Piling Engineer to support works on a key infrastructure project based in Birmingham. This is an initial 3-month contract, with potential for a short-term extension depending on project requirements. This role is suited to a hands-on piling specialist with strong contractor-side experience delivering piling works. The Role You will be responsible for supporting the successful delivery of piling operations on site, working closely with the site team to ensure works are carried out safely, efficiently, and in line with project specifications. Key responsibilities will include: Overseeing and coordinating piling operations on site Producing and reviewing RAMS (Risk Assessments & Method Statements) Preparing and managing Inspection & Test Plans (ITPs) Ensuring quality, compliance, and site standards are...

Sheet metal fabrication business in Telford (TF7) is taking on five punch press setters and operators. One seat on days, four on nights. Temp to perm after twelve weeks. Read this bit first: the shifts are fixed. You pick days or you pick nights and that is the shift you stay on. There is no rotating, no alternating weeks, no getting pulled across at short notice. Whichever one you choose is the one you work. Days Monday to Thursday, 8am to 4.30pm Friday, 8am to 3pm Up to £15.60 per hour Nights Monday to Wednesday, 4.30pm to 3am Thursday, 4.30pm to 2am No Friday night, so it's a four night week Up to £17.10 per hour The work Setting and running CNC turret punches, Trumpf on this site. Setting and changing tooling, grinding and keeping tools in condition, loading programmes, working off engineering drawings and checking your own components as they come off the machine. What they're after Punch press setting on Trumpf or Amada, or something close enough that you'll pick these up...

One night shift press brake seat with a sheet metal fabrication business in Telford (TF7). Temp to perm after twelve weeks. This is a permanent night shift, not a rotation. No swapping onto days, no alternating weeks. Nights is the job. Hours Monday to Wednesday, 4.30pm to 3am Thursday, 4.30pm to 2am No Friday night, so your weekend starts Thursday Up to £17.10 per hour The work Setting and operating CNC press brakes, Amada on this site. Tool setting and changes, folding from engineering drawings, first off checks and gauging your own work through the run. What they're after Press brake setting on modern CNC brakes, Amada ideally, Bystronic, Trumpf or LVD all fine. Reading drawings and working out your own bend sequences. Fluent English. Because it's a single seat on nights you'll be working on your own initiative with no day shift support, so this suits someone who's done it long enough to trust their own judgement. Apply through the advert and one of us will ring you back...

Project Planner Glasgow, Scotland Civil Engineering Contract £600 per day Full-time Flexible working arrangements Are you an experienced Planner looking to play a key role on some of the UK's most complex civil engineering projects? Do you enjoy working closely with project teams, influencing delivery from pre-construction through to completion, and providing accurate planning that drives successful project outcomes? If you're looking to join a well-established contractor with a strong pipeline of major infrastructure work, this could be the opportunity for you. Our client is a leading civil engineering contractor delivering major infrastructure schemes across sectors including highways, water and all things civils. Due to continued growth, they are looking to appoint an experienced Planner to strengthen their planning team. This is an excellent opportunity for someone with a solid civil engineering background who wants to work on high-value projects while developing...

Are you a Senior Electrical Engineer with experience delivering complex building services projects within defence, custodial, public sector, or other highly regulated environments? We are seeking an experienced contractor to support a growing portfolio of secure infrastructure projects across the UK. This is an excellent opportunity to join a multidisciplinary project team delivering critical electrical engineering solutions on high-profile Ministry of Defence (MoD) and Ministry of Justice (MoJ) programmes. The Opportunity As a Senior Electrical Engineer, you will take a lead role in the design, coordination, and delivery of electrical building services projects from feasibility through to completion. Working alongside multidisciplinary teams, you will provide technical leadership, manage project delivery, and maintain strong client relationships throughout the project lifecycle. Key Responsibilities ·Lead and deliver electrical building services designs across a range of...

NRL is looking for a Fitter to provide a high quality, comprehensive, accurate and timely assembly of FA, motor pump sets and manifold assemblies, to support the achievement of business objectives and the provision of superior service.   Main Objectives and Tasks To build and maintain a good working knowledge of FA automation assemblies including TS2, VF, LT and EDC assemblies and their assembly methods, company products and services, customers and working practices, to perform the role efficiently and effectively with a keen eye on the finer details. To contribute to the overall department objectives and plan by: Sharing information with others to enable them to fulfil their role inclusive of assisting with apprentice development as and when required. Using knowledge, information and skills in planning and working for the department. Sharing ideas and suggestions for improvements via the team Continuous Improvement Process. Involvement in work area BPS (Bosch Production System)...

Role Overview An exciting opportunity has arisen to join the 1AWYF2 Fuel Systems Installation Wing Engineering Design Team in Filton. You will operate as part of a multi-national team with presence in Filton, Broughton, and Wichita. The Wing Systems Installation Team plays an important part in ensuring that Airbus manufactures the world's best aircraft. We are a highly skilled, motivated and diverse team of Design Engineers focused on constantly challenging the current design and conventional thinking in order to maximise profitability whilst ensuring on time delivery and quality. In this role, you will have the opportunity to develop your Fuel Systems Installation Design skills across the full range of Airbus commercial aircraft as well as the opportunity to engage with a variety of customers, stakeholders and suppliers. The team portfolio includes Single Aisle, A380, A400M , A330 and A350. We also support R&T projects such as ZeroE, WoT and co-ordinate our activities...

Senior DSP Firmware Engineer | Contract | Hybrid | Stevenage The Role * Design, simulate and implement DSP algorithms for advanced communications and sensing systems. * Develop, test and verify FPGA firmware using VHDL and/or Verilog. * Produce firmware designs from system requirements and functional specifications. * Support hardware integration, debugging and product development within a multidisciplinary engineering team. Key Skills * 5+ years' FPGA/DSP development experience. * Strong VHDL and/or Verilog design skills. * FPGA simulation, verification and test experience. * Experience with formal configuration control. Desirable * C/C++ for SoC or embedded processor development. * Xilinx Versal AI Engines. * 5G/LTE communications. * Technical leadership experience. Sponsorship is not available for this position