140 jobs found in Barnet

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Engineering Project Manager 6 Month initial Contract Work Location: Stevenage Overview of department:   The role sits within the Electronics Engineering department. They are growing, dedicated and we work as a team to deliver projects. You will be managing detailed design of electronics products such as printers, small thermostats ect.   Responsibilities: Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy.   Skillset/experience required: Someone with drive, passion and commitment who has: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management...

Randstad is seeking a Section Engineer to join a reputable highways contractor on a scheme in North London near Tottenham. Previous experience working on highways contracts (eg National Highways / TFL) is highly enouraged. This role is paid via CIS and expected to last 6-8 months. Scope of work will include roadworks and surfacing schemes, drainage, street lighting, lining and signing projects, accessibility upgrades, urban realm improvement and walking / cycling paths Key Responsibilities: Project Leadership: Take overall responsibility for the successful completion of designated sections or full projects, leading by example and ensuring the day-to-day delivery of construction work. Team Management: Manage a small team, ensuring all members are inducted and meeting role-specific requirements. Provide leadership, coaching, and training to motivate the team and enhance performance. Program Management: Draw up and monitor 4 weeks program, ensuring project milestones are...

Long term contract opportunity as an Aesthetic Technician working for a world renowned rolling stock manufacturer, at their site in North West London. Candidates are expected to have previous paint spraying experience and training will be provided for other responsibilities of the role. Job title: Aesthetics Technician Job location: North West London Hourly pay rate: £22.28 PAYE / £28.99 Umbrella Shift Pattern: Mon - Fri Days Hours per week: 50 Duration: On-going Start date: ASAP Company Summary: A world renowned Rolling Stock vehicle service, maintenance and manufacturing company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: As an Aesthetics Technician you will be working on a live rail depot as a member of a productive team. Your job role will be varied duties and task will include: *...

Location: London & South East Employment Type: Full-time, Mobile Role About Us My client is a specialist provider of commercial mechanical services across Central London. We work with a wide range of commercial clients and property owners, delivering high-quality installation, reactive maintenance, and planned preventative maintenance services. Role Overview We are seeking an experienced and self-motivated Mobile Commercial Plumber / Plant Room Engineer to join our growing team. The successful candidate will be responsible for delivering high-standard mechanical and plumbing services across commercial buildings, ensuring plant rooms and critical systems are operating safely, efficiently, and in line with compliance requirements. Key Responsibilities Carry out reactive repairs, PPMs, and installation works across commercial sites. Conduct plant room checks and ensure all equipment is functioning correctly and efficiently. Work with mechanical systems including: Actuators AHUs...

Example Recruitment Group is currently recruiting on behalf of a national heating contractor operating within the private sector. They require self-employed heating engineers for an ongoing service & repair contract in the Wembley area. Contract Details: Location: Wembley Work Type: Annual Service Visits (Annual Gas Safety Check), Landlord Gas Safety Records, and central heating repairs. Work Load: 6-8 pre-booked appointments per day Commitment: Minimum of set 3 days per week. Up to 5 days available plus optional weekends and evening call out available at enhanced rates. Contract Length: Ongoing (no end date) Payment terms: Weekly one week in arrears. Rates: ·Annual Service Visit (Annual Gas Safety check): £22.10 per appliance ·Repairs: £53.37 per completed property (full van stock and parts supplied) ·Linked Repair: £29.75 plus Annual Service Visit Rate (if repair required at Annual Gas Safety Check) .Long duration jobs: £150 ·Optional out-of-hours and weekend work is...

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock...

Service Engineer – Emergency Lighting & Fire Alarms (Subcontract Role) V7 are looking for an experienced Service Engineer to carry out planned and reactive maintenance on emergency lighting systems and fire alarm systems. This is part of a long-term commercial public sector contract with loads of ongoing work and excellent opportunities for repeat subcontract roles. The work will primarily be across north London and the m25 area mainly on commercial sites. Our client is a rapidly growing national business specializing in the security and fire industry, delivering high-quality installation, service, and maintenance nationwide. The Contract * Planned preventative maintenance (PPM) and reactive repairs on emergency lighting systems and fire alarm systems. * Testing, inspection, and certification of emergency lighting in compliance with BS 5266. * Servicing and fault-finding on Protec addressable fire alarm panels as well as other addressable and conventional systems, in...

Essentia Solutions are currently working on behalf of a very well-regarded commercial catering project business based in London. They currently have a fantastic opportunity for an experienced project manager to join their existing team. As a project manager you will be responsible for the delivery of turnkey installation projects across London and surrounding areas. Key Duties • Manage cradle to grave installations of commercial kitchens across many different hospitality settings across London and the South of the UK. • Manage site install teams, subcontractors, and suppliers on a day to day basis • Be the point of contact for the customer and insure the highest quality finish and delivery of the Project . • Take responsibility for compliance and Health & Safety on site and also be responsible for all site documentation. Candidate Requirements • Proven Project Management experience within the Commercial Catering Sector • Be able to demonstrate strong leadership skills and a...

Are you a Quantity Surveyor with experience working on utilities diversions for major infrastructure projects?   Do you have experience working on NEC, target cost contracts?   This is an excellent opportunity for a Quantity Surveyor to join a leading joint venture on the delivery of utility diversions on a major infrastructure project. The ideal candidate will have experience working on NEC, option C contracts on utility diversion works.   Rate: £(Apply online only)/day Umbrella, Inside IR35 Duration: 4 months Location: Acton, up to 2 days remote   Requirements: ·Minimum 5 years of experience working in a commercial environment ·Previous experience working on NEC option C contracts on a major infrastructure project ·Previous experience working on utilities diversions ·Hold a RICS/CICES accredited degree   If you are interested in applying for this role, please email your CV to me at (url removed) or call me on (phone number removed)

We are currently working with a medium sized M&E contractor with a turnover of circa £40m and very exciting order book of notable projects who are looking for a mechanical project manager to work on a commercial decarbonisation programme in East London. Reporting to a contracts manager you will act as mechanical lead, delivering across multiple projects (combined mechanical value circa £5m) direct to the end client. You will have the support of a team tasked with managing and motivating specialist contractors and packages through to PC Duties: Attend Post-tender / Pre-contract review meetings with Clients & Main Contractors to discuss and agree contract scope along with both commercial and contractual matters.* Post contract award carry out initial equipment checks alongside our design team and advise the design team of any concerns at the earliest opportunity to avoid any procurement / programming or financial implications later. • Post contract award develop equipment...

Temporary Lead Engineer – Oxford Street, London - FM Service Provider – £30 per hour    CBW is recruiting for a temp to perm Lead Engineer to be based across a collection of high-profile commercial properties in central London. The role involves overseeing several modern, premium office environments that have recently undergone significant investment, providing contemporary workspaces focused on quality, efficiency, and tenant wellbeing. As Lead Engineer, you’ll manage a team of four engineers responsible for delivering exceptional maintenance and engineering services across multiple locations. Working Monday to Friday, 8am–5pm, you’ll take ownership of service delivery, ensure smooth daily operations, and build strong working relationships with occupiers across this flagship London portfolio. Key Duties & Responsibilities Manage agreed KPI and SLA’s alongside the Supervisor Arrange specialist sub-contractors Manage all reports/site log books (working with the Contract...

A major civil engineering contractor is seeking an experienced Site Agent to lead the delivery of a significant heavy civils project in London. The role requires strong leadership, technical capability, and a proven background overseeing complex civil engineering operations. This is an outside IR35 opportunity offering an excellent day rate and long-term continuity on a high-value scheme. Key Responsibilities * Lead day-to-day site operations across heavy civils work packages. * Manage engineering teams, supervisors and subcontractors. * Oversee site delivery, ensuring works are completed safely, on time, and to specification. * Ensure compliance with project quality systems, including ITPs, WPPs, RAMS and site records. * Drive short-term programming and assist with overall project planning. * Liaise with the client, designers, stakeholders and internal management teams. * Provide technical guidance and problem-solving...

Systems Engineer Certain Advantage is hiring for an Electrical Systems Engineer based in the Stevenage area. This role is on a contract basis and is office-based. The Company We’re working with a Manufacturing business that operates in the Aerospace sector. They design, manufacture and deliver industry-leading commercial aircraft, and separate Space and Defense division. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for an Electrical Systems Engineer—someone ambitious and ready to make an impact. You’ll be results-orientated and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Interpretation of electrical and functional test requirements Provide test solutions Development and debug of Automatic Test procedures (ATP) using a bespoke high-level S/W language Support Spacecraft systems functional and performance tests during environmental testThe...

AIT Electrical Ground Support Equipment (EGSE) Engineer Certain Advantage is hiring for an AIT Electrical Ground Support Equipment (EGSE) Engineer based in the Stevenage area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that operates in the Aerospace sector. They design, manufacture and deliver industry-leading commercial aircraft, and separate Space and Defence division. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for an AIT Electrical Ground Support Equipment (EGSE) Engineer —someone ambitious and ready to make an impact. You’ll be results-orientated and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Maintenance and fault finding of electronic/RF test racks. Computer systems and networks administration. Programming and scripting languages. Environmental and launch test...

Opportunities exist, inside IR35, for standalone project Quantity Surveyors with civil engineering infrastructure experience managing the commercials on 2-3 projects simultaneously to the value of £2- £5m each. Your duties will include Oversee procurement of subcontractors, materials, and services Manage cost reporting, forecasts, and financial tracking Process payments and manage subcontractor accounts Support project teams with valuations, variations, and final accounts Ensure compliance with company procedures and contractual obligations The requirement for this opportunity includes BSc/ Dip Quantity Surveying or similar Proven experience managing multiple smaller projects simultaneously Full project life cycle experience (from start to handover) Strong understanding of procurement and cost management Excellent commercial awareness and attention to detail Excellent stakeholder management If you keen to be considered for this opportunity, then load your...

We’re Hiring: PWT-EH Team Members for London Underground Infrastructure AHL is expanding our posting teams across the London Underground network and we’re looking for reliable, motivated individuals to join us. Preferred (but not essential): PWT-EH Certification — full training provided for the right person. Must Have: Full UK Driving Licence Strong teamwork skills Positive attitude and willingness to work in a challenging environment Good awareness of HSQE standards Role Details: Shifts: 21:00–05:00 Training: 6 weeks of poster training while completing your PWT-EH competencies Pay: £160 per shift during the first 6 weeks, rising to £175 per shift thereafter Benefits: Company van and fuel card provided upon successful completion of training If you’re dependable, hands-on, and ready to work on one of the largest Media companies, we’d love to hear from you. For more information, call us on (phone number removed)

PRS Recruitment Agency is currently seeking experienced Mechanical Maintenance Engineers to work with some of our most prestigious client in London. As a leading provider of recruitment solutions, we offer competitive rates of pay ranging between £22.00 and £24.00 per hour, dependent on experience and qualifications. Key responsibility: Carrying out daily PPM and Reactive Maintenance tasks Carrying out daily emergency callout tasks Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution) Emergency lighting Air Conditioning – Air Handling Units / Fan Coil Unit (Filter changes, cleaning) Chillers – Re-set Water Treatment (Temperature checks) Pumps, motors Water Treatment BMS System – Monitor (i.e. Hot & Colds) UPS Systems – Monitor / Take readingsRequirements: Trade trained with ideally 3 years’ experience in the building services City & Guilds Qualified Mechanical Has the will and desire to succeed and learn Good building...

I am looking for an experienced BMS/Controls & Commissioning Engineer to join my client in London, starting ASAP My client has worked on several well known projects in London, including football stadiums, airports, city buildings such as Apple HQ and more. This role focuses heavily on Schneider EcoStruxure / StruxureWare / PME / Unity Pro software, so strong hands-on experience is essential. Key Requirements: BMS commissioning and controls expertise Strong Schneider software skills (EcoStruxure, StruxureWare, PME, Unity Pro) Rate: Flexible, paid hourly / daily and outside IR35 Location: London (varies depending on project) If this is for you, to discuss the role and rates in more detail please apply or get in touch

Mechanical Design Engineer - Contract (Outside IR35) Location: London (3 days on-site per week) A leading client is seeking an experienced Mechanical Design Engineer to join their team on a contract basis. What we're looking for: Strong background in mechanical engineering and new product development Proficiency in SolidWorks or Creo Experience designing consumer goods or electronicsContract Details: Outside IR35 Rate - £400-£500 per day Hybrid working (London, 3 days per week)If you're interested and available, please send your CV and we'll share more details. Please click to find out more about our Key Information Documents. Please note that the documents provided contain generic information. If we are successful in finding you an assignment, you will receive a Key Information Document which will be specific to the vendor set-up you have chosen and your placement. To find out more about Progressive please visit Progressive Recruitment, a trading division of SThree...