424 jobs found in Bexley

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Engineering Project Manager 6 Month initial Contract Work Location: Stevenage Overview of department:   The role sits within the Electronics Engineering department. They are growing, dedicated and we work as a team to deliver projects. You will be managing detailed design of electronics products such as printers, small thermostats ect.   Responsibilities: Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy.   Skillset/experience required: Someone with drive, passion and commitment who has: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Job title: Systems Engineer (Digital Engineering) Location: Reading/Hybrid (2-3 days per week on site) Rate: £83 per hour inside ir35 Contract: 6 months+ SC security clearance is required for this role Job description: We're looking for a Systems Engineer within Product Delivery for a client of mine who are a leading IT and engineering firm operating within the UK defence sector. You will own and evolve their System of Systems (SoS) digital engineering capability. Responsibilities: Deliver and continuously improve SoS toolchains (Cameo/UAF, SysML/UML, IBM DOORS NG, interface & configuration management, simulation and verification integration). Define the reference architecture and technical baselines for multi-system digital solutions. Create and manage a clear capability roadmap and backlog aligned to enterprise priorities. Enable full digital traceability from capability requirements → architecture → interfaces → analysis → verification → compliance evidence....

Job title: Systems Engineer (Digital Engineering) Location: Reading/Hybrid (2-3 days per week on site) Rate: £83 per hour inside ir35 Contract: 6 months+ SC security clearance is required for this role Job description: We're looking for a Systems Engineer within Product Delivery for a client of mine who are a leading IT and engineering firm operating within the UK defence sector. You will own and evolve their System of Systems (SoS) digital engineering capability. Responsibilities: Deliver and continuously improve SoS toolchains (Cameo/UAF, SysML/UML, IBM DOORS NG, interface & configuration management, simulation and verification integration). Define the reference architecture and technical baselines for multi-system digital solutions. Create and manage a clear capability roadmap and backlog aligned to enterprise priorities. Enable full digital traceability from capability requirements → architecture → interfaces → analysis → verification → compliance evidence....

Role:               Electrical Systems Engineering consultant Based;            Home based with travel to site as needed - Cambridgeshire PE19 Contract:        12 months+ Rate;              Negotiable Our client is building a team and requires two candidates who will be part of a multi-disciplined team conducting various studies from concept design to feasibility studies. Be responsible for the electrical system studies and design of the generation & distribution infrastructure operation philosophy. Role & Responsibilities: Support sales team with early engagement with customers by understanding and interpreting customer needs and objectives. Be creative, analytical, and flexible in generating designs and solutions and effectively communicating features and limitations of various solutions. Ensure customer needs are understood and met from a FES perspective. Document and share best practices and lessons learnt from projects System Studies and Analysis – performing...

Technical Support Engineering Advisor -Contract Our successful client is looking for an enthusiastic Technical Support Engineering Advisor to join their friendly, proactive team. What you’ll do as a Technical Support Engineering Advisor: * Handle technical customer calls confidently and clearly. * Read engineering drawings and identify required parts. * Work with Bills of Materials, spares, and place orders. * Support the manufacturing-to-supply process. * Take a proactive approach to problem-solving. What you’ll need as a Technical Support Engineering Advisor: * Some experience in a technical/engineering support role * Knowledge of manufacturing processes * Ability to interpret engineering drawings * Confident communication skills and a willingness to learn * A positive, can-do attitude If this Technical Support Engineering Advisor role sounds like a suitable opportunity for you, please...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

Premier work support is currently recruiting for a Dip Braze Operative to work Night shifts for our prestigious client based in the Dartford area. Key responsibilities of this role: Dipper - to work closely with pasting departments on day-to-day workload and organise the order of braze for the day under the direction of the Workshop manager. To jig up all work for the oven. To work in the washroom, pre and post cleaning parts. To inspect brazed work in preparation for hardening or packing work to send out to customers. To clean the salt bath at regular intervals and to record this action has been taken. To take salt samples at regular intervals, as required and directed by Workshop Manager. To check chemicals as required. To check jigs and report any damage to the Workshop Manager and then repair as appropriate. To undertake any other duties as requested by the General Manager or Workshop Manager. General Responsibilities: General cleaning and maintenance of work area. Checking...

Electrician required: To undertake highly skilled activities across a wide range of electrical jobs in either domestic properties, ensuring that the quality of works meet current QCC requirements. To keep accurate records of works undertaken and materials used. Specifically: Provide a wide range of professional Electrical skills throughout all contracts serviced by Building Services, and where appropriate, to take a lead role when working as a team or in conjunction with other trades (up to 5 others). To have a concise understanding of Domestic Electrical works in order to carry out repairs and installations as needed. Certificate work when completed. (NB this acknowledges personal liability as per regulations). Apply and fully complete the correct NICEIC certification or equivalent. To operate and maintain electrical testing equipment ensuring annual calibration is carried out. Following testing decide on appropriate actions including, if necessary, evacuation of premises and...

TEMPORARY - Role RTITB Certified Counterbalance Forklift Truck driver HRGO are assisting with a project role for an experienced (min 3 years) RTITB certificate FLT Counterbalance driver for this engineering firm based in Rainham, ESSEX. This role will be a mix of both FLT driving along with assisting within the warehouse/stores operations as well. Overview RTITB - FLT Driver - Counterbalance Moving Pallets, which hold tins approx. 36 to each pallet. Unpack the tins, using Electric Hoist and clips Cut the plastic off Re add new labelling to every tin removed and re wrap the pallet, using wrapping. Add tins and more the pallet again. Moulding of key items as well.PLEASE be advised this is a full time onsite position TEMPORARY basis. I am looking for 2 people for this role, due to the location in Rainham there is no public transport, so a driver is advantageous for this location, nearest station C2C Rainham. For more details regarding this role, please get in touch with...

Role type: Temp to Perm Working arrangement: Morning (7am – 3.30pm) or Afternoon (3pm – 11.30pm) shift The company Priding themselves on delivering the best highways solutions in the industry, this integrated service provider aims to meet the needs of road users and the public in ways that are economically, socially and environmentally sustainable, both now and in the future. The role This is a busy and diverse role based in their Beckton call centre, you will be a proactive member of the team undertaking a crucial role assessing, scheduling, and permitting defects received to ensure defects are attended and repaired within required contractual timescales. In short you will * Log defects from the Police, inspectors and clients by phone and email and, using the defect guidance and relevant intervention levels, will determine a response time and coordinate the appropriate gang to respond * Close down enquiries that do not need to be actioned with the appropriate resolution code...

Field Service Engineers ATM /Breakfix We are excited to offer an opportunity for skilled engineers to join us on a flexible pay-per-hour basis, supporting ATM First Line Maintenance (FLM) activity. The role is inside the IR35 What we’re looking for * You must live within one of the following post codes: NW, W, HA, TW or to the western side of NW. * Passing a Pre Employment Screening Level 4 is essential * Though previous ATM experience is desirable, a background working as a Field Engineer in the Telecoms or with White Goods (Washing Machines, Dishwashers etc.) would also be desirable, but you must have at least a year’s experience working ‘out in the field’. * Flexibility to work within our operational window of Monday to Sunday, 08:00–22:00. * Availability for 8.5–9 hour shifts (including a 30-minute unpaid break), 5 days over 7. * You must have your own vehicle and a full UK driving licence. * Own an Android smartphone * Supply your own hand tools * Skills and...

Fraser Edwards is currently recruiting for a skilled Maintenance Electrician on behalf of a well-established and leading Social Housing Contractor for a long term contract role. Due to continued growth and ongoing success, our client is expanding their Repairs & Maintenance team. This is an excellent opportunity to join a thriving business with a strong reputation and be part of its exciting future development. The Role As a Maintenance Electrician, you will be responsible for delivering high-quality electrical maintenance services across domestic properties and communal areas. Duties will include: * Carrying out reactive electrical repairs and maintenance * Diagnosing faults and completing effective fault rectification * Performing electrical testing and inspection * Ensuring all installations comply with current regulations * Issuing relevant certification upon completion of works Essential Requirements * Own Vehicle - Mileage paid...

Inspector Greenwich, SE10 Ongoing long-term contract Day shifts and night shifts required £13.27 Per hour (Weekly Pay) We are currently recruiting Inspectors to work in a busy clean production environment on behalf of a global telecommunications company. We are seeking Inspectors with a strong attention to detail and a commitment to producing precision work. Inspectors play a crucial role in the manufacturing process, ensuring the safe and accurate assembly of electro-optical and mechanical units for subsea telecommunication equipment. This may include knowledge of fibre optic handling and splicing. Inspectors are assigned to various departments, with each role contributing to the creation of high-specification products, adhering to specific requirements. Collectively, they play a vital and unique role in the overall creation and assembly of our products. All work is carried out in an Electrostatic Protected Area. Prior experience in similar Inspection or Quality Control...

About the Role This is an exciting opportunity for a Graduate Software Test & Development Engineer to join a product development team working on software-controlled power systems used in long-life, safety-critical applications. This role is well suited to someone early in their career who enjoys writing code, breaking software (on purpose), and understanding how software interacts with real hardware. You don't need prior industry experience - training, mentoring, and hands-on support are built into the role. You'll help develop and test the software used to manage power feeding equipment, which provides controlled electrical current to complex infrastructure systems. Your work will directly contribute to system safety, reliability, and performance. What You'll Be Working On Based in Greenwich, you'll work closely with software developers, test engineers, and the wider product development team to: Develop and test software used to control power systems Carry out unit...

Role: Mechanical Assembly Technician Location: Grays, Essex  Hours: Full Time, Monday - Friday  Salary: £15ph An excellent opportunity has now arisen for a Mechanical Assembly Technician to join our clients successful team. Duties of a Mechanical Assembly Technician: Assembling plant and mechanical tools Calibrating equipment to specification Carrying out mechanical fitting and adjustments Using hand tools and workshop equipment daily What we would like from you: Hands-on experience using tools (essential) Mechanical engineering or mechanical assembly experience (ideal) Experience assembling or working with plant tools or similar equipment Comfortable working in a physical, workshop-based role If you are interested in this role, please apply below with your most recent CV. WGCTEMPS By applying to this job advertisement, you confirm you have read and understood our  and give OA Group authorisation to hold you provided data. Thank you for your interest in this vacancy,...

A reputable engineering consultancy based in Canary Wharf, is seeking an experienced Electrical Design Engineer on a contract basis to support the delivery of electrical design solutions across rail and infrastructure projects. The role will involve a mix of detailed design work and collaboration with clients and project teams, with occasional visits to client offices/sites to assist with specialist works, including cooling system–related projects. Role Responsibilities * Interpret client specifications and develop compliant electrical designs * Deliver electrical services design for rail/infrastructure projects * Produce calculations, technical reports, specifications, and drawings * Design LV distribution, cable management, lighting & controls, earthing/bonding, metering, and sustainable systems * Use AMTECH and other design tools for calculations and compliance * Collaborate with multidisciplinary teams and support...