25 jobs found in Bicester

Metrology Engineer - 6-Month Contract Location: Oxfordshire Working Arrangement: Minimum 80% onsite About the Company An innovative company, established in 2021, is dedicated to commercialising next-generation electric motor technology and intellectual property for the emerging electrification aerospace market. Their technology leads the way in delivering hybrid and all-electric propulsion solutions across Urban Air Mobility (UAM), Unmanned Aerial Vehicles (UAVs), and General Aviation (GA). Operating from a state-of-the-art 39,000 sq ft facility in Oxfordshire, the company's ultra-high-performance, low-weight axial-flux motors and power electronics are smaller, lighter, and more robust than competing technologies. The site includes advanced engineering labs, custom test and validation facilities, and full-scale manufacturing capability. The Opportunity *We're looking for an experienced Metrology Engineer to join the team on a 6-month contract. *This role has been created due to...

Concrete Repair Operatives Location: Bicester (M40 Corridor) Pay: £170–£200 per day (depending on experience) Start: Immediate Duration: Ongoing work through to Christmas We are currently recruiting 3–4 experienced Concrete Repair Operatives for an exciting bridge maintenance project based in Bicester. This is an excellent opportunity to join a well-established civils team working on structural bridge repair and maintenance works. Duties will include: * Concrete breakout and reinstatement * Concrete and resin repair works * Working safely on a live civils project * Following site health and safety procedures Requirements: * Previous experience carrying out concrete repairs or resin repair/injection works * Experience working on bridge, highways, infrastructure or civil engineering projects * Valid CSCS Card * Ability to work independently and as part of a team * IPAF, PASMA or other relevant tickets are advantageous but...

We are currently looking for a Bms Service Engineer. You will be working in the Oxford area. A van + fuel card will be provided Hours of work will be between the hours of (Apply online only) Monday to Friday. Occasional weekend/evening working will be required Temp - Perm contract Pay rate - £34.71ph umbrella Job Purpose The role of Service Engineer will include carrying out a number of tasks on contracted customer sites, including PFI Schools, PFI Hospitals, Government Estates and MOD sites. Your day to day will include: * Install, configure, and commission BMS components and equipment, including sensors, controllers, actuators, and software systems. * Carry out maintenance checks on Trend, Tridium and Distech BMS’s on our various sites. * Reactive call out rota will be worked (additional financial benefit included for being on call and attending) * Provide technical assistance and support to clients regarding their BMS systems. * Identify opportunities for...

Senior Parking Engineer The purpose of this role is to deliver high-quality civil enforcement across the County of Oxfordshire. The successful candidate will be responsible for the development and implementation of new parking restrictions, including Controlled Parking Zones (CPZs), helping to maximise the on-street parking network for the benefit of residents, local communities and the travelling public. The role will also involve supporting projects for the introduction of Automatic Number Plate Recognition (ANPR) enforcement sites, working alongside colleagues on the design and implementation of appropriate traffic signs to enable robust and effective enforcement. Key Responsibilities ·Develop and implement new parking restrictions, including CPZs. ·Deliver ANPR enforcement projects and associated traffic signing. ·Work collaboratively with colleagues to design and implement traffic signs and road markings. ·Ensure compliance with all relevant parking legislation, local...

Senior Parking Engineer The purpose of this role is to deliver high-quality civil enforcement across the County of Oxfordshire. The successful candidate will be responsible for the development and implementation of new parking restrictions, including Controlled Parking Zones (CPZs), helping to maximise the on-street parking network for the benefit of residents, local communities and the travelling public. The role will also involve supporting projects for the introduction of Automatic Number Plate Recognition (ANPR) enforcement sites, working alongside colleagues on the design and implementation of appropriate traffic signs to enable robust and effective enforcement. Key Responsibilities ·Develop and implement new parking restrictions, including CPZs. ·Deliver ANPR enforcement projects and associated traffic signing. ·Work collaboratively with colleagues to design and implement traffic signs and road markings. ·Ensure compliance with all relevant parking legislation, local...

Highways Contract Manager The purpose of this role is to undertake the delegated role of NEC Service Manager for the County Councils Highways contracts, with an annual value of £30m-£50m. You will ensure contracts are delivered in accordance with NEC terms and conditions, overseeing service performance, payments and contract compliance while demonstrating value for money for the communities of the County and effectively managing risk. Key Responsibilities ·Act as the delegated NEC Service Manager for major highways maintenance contracts. ·Oversee the delivery of highways contracts, ensuring compliance with contract conditions, service requirements, performance standards and payment mechanisms. ·Work collaboratively with internal teams and external supply chain partners to identify opportunities for innovation, service improvements and revenue cost savings. ·Support the Head of Highway Maintenance in developing and delivering the strategic vision for the Highways Operations...

Job Title: Project Manager- Civils Type: Contract Location: Oxford Salary: dependant on experience Job Reference: JHPMC I am looking for a project manager with a good rail civil engineering background, to deliver engineering technical excellence on works in Oxford. Role You will have previous experience working in a similar role within programmes from a civils/buildings aspect. This role would suit a project manager who has worked on rail and civil new works. Key responsibilities include but are not limited to: Ensure the civil engineering element of the works goes according with works plans. Organise resources of people and materials to ensure delivery of works. Work in a team for round the clock coverage of job sites. Assist with engineering design and plans as required Attend engineering reviews as required for allocated contracts.Essential requirements: Civil engineering background Buildings project works at early stages Will need to have current or past project...

Job Title: Scheme Project Manager- Civils Type: Contract Location: Oxford Salary: dependant on experience Job Reference: JHPMC I am looking for a scheme project manager with a good rail civil engineering background, to deliver engineering technical excellence on works in Oxford. Role You will have previous experience working in a similar role within programmes from a civils/buildings aspect. This role would suit a scheme project manager who has worked on rail and civil new works. Key responsibilities include but are not limited to: Ensure the civil engineering element of the works goes according with works plans. Organise resources of people and materials to ensure delivery of works. Work in a team for round the clock coverage of job sites. Assist with engineering design and plans as required Attend engineering reviews as required for allocated contracts.Essential requirements: Civil engineering background Buildings project works at early stages Will need to have...

Composite Trimmer / Fitter – F1 Team (Contract) Location: Enstone, Oxfordshire Working Pattern: Shifts available (days, nights, weekends) Contract: Initial contract until 31st December 2026 (extension potential) About the Opportunity This role is being advertised by Arden White, a specialist recruitment partner to the motorsport and advanced engineering sectors. We are currently seeking experienced Composite Trimmers / Fitters to join a leading Formula 1 team based in Enstone. This is an exciting opportunity to contribute to the production and assembly of high-performance carbon fibre components in a fast-paced and precision-driven environment. Role Overview As a Composite Trimmer / Fitter, you will be responsible for finishing and assembling carbon fibre components to exacting standards. You will play a key role in ensuring all parts are prepared, finished, and fitted in line with the precise engineering specifications required within Formula 1. Key Responsibilities *...

Rubicon Consulting is currently recruiting for Electrical Supervisor on an 12-18 month contract based in Oxfordshire. Role Summary * Supervise electrical installation works on National Grid substations. * Manage subcontractors and direct labour on site. * Ensure all work is carried out in accordance with project specifications, drawings, and National Grid procedures. * Conduct daily briefings, toolbox talks, and safety inspections. * Ensure compliance with HSE legislation and company policies. * Review RAMS and ensure safe systems of work are implemented. * Coordinate with Site Managers, Engineers, and Commissioning teams. * Monitor progress, quality, and productivity on site. * Complete site documentation, reports, and inspection records. * Assist with planning and resolving technical/site issues. Requirements: * Proven experience as an Electrical Supervisor on National Grid transmission or HV substation projects. * Strong understanding of...

Blocktech MEP is looking on behalf of their client for Pipefitters for a project based just outside Oxford for an initial 8-month contract. The project is a large-scale project based inside already constructed warehouses. You will be working on and need experience in both Stainless Steel & Carbon Steel. Stainless Steel will be crib up to 4 inch and below. Then 4 Inch and above up to 8 Inch is with Victaulic connections. On Carbon above 2 inch all Victaulic connections. Contract Details: * 8:00 to 17:00 * £23 Per hour * £150 a week Travel/Hotel Allowance. (See Terms Below) * 1.5 for Saturdays and Double for Sundays (Currently not available) * Provisional start date of 01/08/2026 * 2 month contract (Potential of phase 2 for good performers.) Notes: Travel or Hotel Allowance is only paid if a full Monday to Friday week is completed and if the registered address of the fitter is over 25 miles from the project location

Chemistry Laboratory Technician (Operator) 24-25k South East ABJ6515 TEMP - 6 months – on site An excellent opportunity for an early-career Chemistry Laboratory Technician / Lab Operator to join a dynamic and supportive team within a modern laboratory environment. This role is ideal for someone with a background in chemistry or manufacturing who is looking to develop hands-on experience in formulation, blending, and analytical testing. As lab technician you will play a key role in supporting laboratory operations while gaining exposure to wider technical and technology teams in a global setting. As a Laboratory Technician / Lap Operator in an industrial manufacturing setting, you will support day-to-day lab activities, including formulation and blending work, coordinating tests, and preparing samples for dispatch. This is a fantastic opportunity to build practical lab skills while developing your knowledge in performance testing and analytical science. You’ll also have the chance...

We are currently seeking an experienced 5- axis CNC machinist to join a high-performance F1 team This role is ideal for skilled 5-axis Machinist to join our team and help craft the components that power the F1 race cars to victory.  You will be working on cutting-edge components in a fast-paced, precision-driven environment. This role is for a weekday shift, running from Tuesday to Friday 7.00 - 17.30 This role will be 100% based on site in Enstone, Oxfordshire. Key Responsibilities: Operate and program 5-axis CNC machines using Heidenhain controls Machine complex components to tight tolerances Interpret engineering drawings and CAD models to produce precision parts Perform in-process inspections and ensure components meet quality standards Collaborate with design and quality teams to resolve machining challenges Maintain a clean and safe working environment in line with F1 standards Requirements: Proven experience as a 5-axis CNC machinist, ideally in motorsport,...

Composite Laminator – F1 Team (Contract) Location: Enstone, Oxfordshire Working Pattern: Shifts available (days, nights, weekends) Contract: Initial contract until 31st December 2026 (extension potential) About the Opportunity This role is being advertised by Arden White, a specialist recruitment partner to the motorsport and advanced engineering sectors. We are currently seeking experienced Composite Laminators to join a leading Formula 1 team based in Enstone. This is an exciting opportunity to contribute to the production of high-performance carbon fibre components in a fast-paced and precision-driven environment. Role Overview As a Composite Laminator, you will be responsible for the manufacture of high-quality carbon fibre components using pre-preg materials. Working to tight tolerances, you will play a key role in ensuring components meet the exacting standards required within Formula 1. Key Responsibilities * Lay-up of pre-preg carbon fibre components to tight tolerances...

Software Engineer | Automation & Manufacturing | Witney | 3-6 month contract | Day rate on offer – Inside IR35:    MARS Recruitment is hiring a temporary contract Software Developer with strong C# development experience to support the design, development, testing, and maintenance of software solutions within an industrial automation and manufacturing environment. The role will focus on creating and maintaining applications that integrate with production systems, automation equipment, databases, and operational reporting tools. The successful Software Engineer candidate will work closely with manufacturing systems, automation, engineering, operations, and IT stakeholders to deliver practical software improvements that support production efficiency, data visibility, system reliability, and continuous improvement. Key experience and skills: Strong hands-on C# development experience using .NET Core and .Net Framework as well as Modbus and S7.Net programming. Experience...

Job summary We have an exciting opportunity for a Specialist Biomedical Scientist in Haematology and Blood Transfusion to join our dynamic Blood Sciences Department. You will be required to work across our central laboratory at Stoke Mandeville Hospital and our satellite site at Wycombe Hospital, with deployment to either location as needed to support service delivery. You will support patient investigations by preparing, storing, and using reagents and consumables appropriately, performing manual laboratory procedures such as precision pipetting, reagent preparation, and complex analytical testing. Main duties of the job As a Specialist Biomedical Scientist, you will process and analyse patient samples across one of the laboratorys four sub-sections on a rotational basis. You will apply current scientific knowledge and advanced methodologies to ensure accurate and reliable test results. You will safely and proficiently use complex laboratory analysers, performing routine...

Looking for a good all-round mechanical design engineer, skilled on either SolidEdge or SolidWorks . Enclosuers, cabinets/boxes around electronics, brackets machines parts...basically light metal work that houses systems. Ideal candidate will come from Medical or Electronics enclosures or consumer products..NOT Heavy industry

Mechanical Technician Location: Culham Contract Length: 12 Months Working Pattern: Full-time onsite IR35 Status: Inside IR35 Security Clearance: BPSS required Role Overview We are seeking an experienced Mechanical Technician to support shutdown, maintenance and installation activities within a highly regulated engineering environment. The primary focus of the role will be supporting a specialist mechanical assembly team during planned shutdown periods, including preparation and execution activities. In addition, the successful candidate will provide broader mechanical support across plant systems as required. The role involves working on a variety of sophisticated mechanical systems including: * Vacuum systems * Cooling systems * Pressurised systems * Electro-magnetic systems Responsibilities will include installation, maintenance, fault finding, repair and modification of both existing and new systems. As a Mechanical Technician, you will also be expected to...

Electrical Tester Vacancy We are currently seeking to recruit an Electrical Tester This role will be based in Wolverton. This is what we need you to do…. Responsibilities: * Read schematic drawings * With minimal supervision investigate rolling stock faults found within the test process * Assist the engineering process where necessary * Work within a high voltage environment * Download and process train diagnostic data, undertake fault finding to an advanced level * Test all types of on train systems * Produce complex, analytical technical reports on fault investigation * If required deputise for test team leader * Keep test paperwork up to date, including test sheets and fault logs * Liaise with production departments when necessary * Attend off site railway depots to support our customers requirement This is what we need you to have…. Educational Requirements & Relating Experience: * Equivalent to GCSE C and above in Maths and English. *...

Job Title: Warranty Technician (Rolling Stock) Job Location: Bletchley Hourly Pay Rate: £28.36 PAYE / £ 37.00 Umbrella Shifts: 12-hour shifts Shift Pattern: Mon - Thurs Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in...