10 jobs found in Bletchley

Job Description: Paint Sprayer on Rolling Stock Vehicles Position: Paint Sprayer Location: Milton Keynes Rate: £28.29 per hour on Earlies/Afters or £32.33 per hour on Nights (Role is Inside IR35)  Hours: Earlies: 06:00-16:00 / Afters: 12:00-22:00 / Nights: 22:00-06:00 Summary: A Paint Sprayer is responsible for applying paint and other finishes to vehicles, Vehicle components, machinery, equipment, and various surfaces using spray guns. This role involves ensuring a high-quality finish, maintaining equipment, and adhering to safety protocols. Key Responsibilities: - Surface Preparation: - Cleaning, sanding, and masking surfaces prior to painting. - Ensuring surfaces are properly primed and free of defects before application. Painting and Finishing: - Mixing paints to achieve desired colours and consistencies. - Applying paint, varnish, or other finishes using spray guns or other applicators. - Achieving uniform coverage and thickness according to...

We are currently recruiting Electrical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures. Responsibilities. Installation, maintenance, and fault finding while adhering to health and safety regulations. Experience in electrical fitting, and preferably in a transport or safety-critical environment. General electrical wiring and assembly. Reading and interpreting engineering and wiring diagrams. Completing point-to-point testing and verification.Requirements: Previous experience as an Electrical Fitter or similar role Knowledge of vehicle electrical assembly, repair, and maintenance techniques Ability to work effectively in a team environment Strong attention to detail and quality craftsmanship Level 2 qualification or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME,...

We are currently recruiting Mechanical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures.  Key Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair components. To be able to fault find and carry out diagnostic investigation work. To overhaul of rail components. To undertake training as and when required. To work within a realistic timeframe. To ensure that waste is disposed of in the correct manner. To adhere to written or verbal instructions.Requirements: Previous experience in mechanical roles, or a similar hands-on trade/engineering environment. Confident in the use of hand tools, power tools, and workshop machinery. Strong attention to detail with the ability to read and follow technical instructions. Commitment to working...

We are currently recruiting Vehicle Builders to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of vehicle interiors to a high standard, following industry regulations and company procedures.  Key Responsibilities: Remove, modify, strip, and rebuild vehicle interiors including luggage racks, seat frames, and buffet cars. Competently use a variety of hand tools, power tools, and woodworking equipment such as chisels, saws, planes, torque wrenches, and screwdrivers. Operate mechanical machines such as hand saws, bench saws, and portable circular saws safely and effectively. Read and interpret production information and specifications to ensure accurate and efficient completion of tasks. Carry out basic quality control checks to ensure all work meets required standards. Follow all company procedures, safety regulations, and environmental policies at all times. Prioritise health and safety, ensuring compliance with all...

Ref: P32UF Location: Milton Keynes (MK43) Hours: Monday to Friday 8am-4pm Pay: £30.00-£35.00ph paid weekly via umbrella Duration: Ongoing Contract    Duties To supervise the day to day planning and allocation of the technical maintenance resource within their respective Region Conduct yourself in a professional manner in support of our customers and work colleagues To supervise the Planned Maintenance Programme for their respective sites, and deliver an excellent reactive service to the property portfolio ensuring compliance with all SLA's & KPI's To supervise and deliver small replacements projects and update Asset Registers when equipment is replaced as part of Life Cycle or Small Works Programme Training the team as required including delivering Tool box talks and team briefs Checking paperwork and service standards completed by the team Complete reports and paperwork as instructed by the Engineering Manager Take responsibility for your own training needs and...

TXM Recruit are currently looking to put a team of Welders together on a contract basis for a rail client in Milton Keynes. The team will be performing corrosion removal on various fleets of rolling stock vehicles; you will need to be able to weld in the following positions. As a Welder you would be carrying out a variety of welds, including flat, vertical, horizontal and overhead.  The successful candidate must: Be able to MIG weld to a strong standard. Be able to pass a rail industry standard medical and drug and alcohol test. Minimum Level 2 qualification in welding/fabrication. A weld test will be required prior to start dates being offered, as well as pass a rail standard medical and drugs & alcohol.TXM Recruit is an equal opportunities employer. If you have any specific requirements or require assistance or reasonable adjustments to be made for you during the selection process due to disability or long-term health condition, we will do our best to assist you

TXM Recruit are currently looking to put a team of Test Technicians together on a contract basis for a rail client in Milton Keynes. The team will be performing test and commissioning on various fleets of rolling stock vehicles. Job Title – Test Technician. General Description: Skilled work within a safety critical role which demands a standard of competence necessitating either an apprenticeship to a trade or recognised training programme where an employee is required to be fully qualified in all parts of the trade and capable of producing work to the required standards, specification or finish expected of a Test Technician. To perform defined tasks to written instructions and to be able to work to their own initiative to enable the Depot to provide a quality service to the business. Carry out functional testing and commissioning of EMU/DMU and other rolling stock types of post works to a defined and written standard in line with UK rail safety regulations. Lead fault...

My customer has worked with one of the UK's largest automotive manufacturers over the last 10 years, providing a full engine air path diagnostic calibration to all of the OEM's diesel and diesel hybrid vehicle programs, meeting EU and EPA regulations. We have in recent years expanded our client base working with other prestigious OEM's covering gasoline projects and full OBD systems. ​The development of in-house programmes allows them to provide services ranging from software design meeting current standards, to post-processing data in order to assess calibration change impact or to identify events of interest from hours of logged data. They specialise in systems engineering, system integration, diagnostics, control systems, data processing and testing, providing a range of services from advice through to fully-managed turn-key projects. This position is for a calibration engineer with a focus on OBD test. It could be suitable for a graduate with an interest in this topic area...

We are currently recruiting for a Production / Fabrication Operative to join a well-established manufacturing company in Milton Keynes. This is a hands-on role within a busy workshop environment, ideal for someone with fabrication, production, or engineering workshop experience. You will be involved in the manufacture and preparation of metal components, ensuring production targets and quality standards are consistently met. Key Responsibilities * Fabrication of metal parts and components * Operating workshop tools and equipment * Carrying out quality checks on finished products * Supporting the team to meet daily production targets * Maintaining a clean and organised work area * Following all health and safety procedures Requirements Essential * Previous production, fabrication, or workshop experience * Ability to use basic hand and workshop tools * Good attention to detail and quality *...

Electrical Tester Vacancy We are currently seeking to recruit an Electrical Tester This role will be based in Wolverton. This is what we need you to do…. Responsibilities: * Read schematic drawings * With minimal supervision investigate rolling stock faults found within the test process * Assist the engineering process where necessary * Work within a high voltage environment * Download and process train diagnostic data, undertake fault finding to an advanced level * Test all types of on train systems * Produce complex, analytical technical reports on fault investigation * If required deputise for test team leader * Keep test paperwork up to date, including test sheets and fault logs * Liaise with production departments when necessary * Attend off site railway depots to support our customers requirement This is what we need you to have…. Educational Requirements & Relating Experience: * Equivalent to GCSE C and above in Maths and English. *...