745 jobs found in Burgess Hill

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Job title: Systems Engineer (Digital Engineering) Location: Reading/Hybrid (2-3 days per week on site) Rate: £83 per hour inside ir35 Contract: 6 months+ SC security clearance is required for this role Job description: We're looking for a Systems Engineer within Product Delivery for a client of mine who are a leading IT and engineering firm operating within the UK defence sector. You will own and evolve their System of Systems (SoS) digital engineering capability. Responsibilities: Deliver and continuously improve SoS toolchains (Cameo/UAF, SysML/UML, IBM DOORS NG, interface & configuration management, simulation and verification integration). Define the reference architecture and technical baselines for multi-system digital solutions. Create and manage a clear capability roadmap and backlog aligned to enterprise priorities. Enable full digital traceability from capability requirements → architecture → interfaces → analysis → verification → compliance evidence....

Technical Support Engineering Advisor -Contract Our successful client is looking for an enthusiastic Technical Support Engineering Advisor to join their friendly, proactive team. What you’ll do as a Technical Support Engineering Advisor: * Handle technical customer calls confidently and clearly. * Read engineering drawings and identify required parts. * Work with Bills of Materials, spares, and place orders. * Support the manufacturing-to-supply process. * Take a proactive approach to problem-solving. What you’ll need as a Technical Support Engineering Advisor: * Some experience in a technical/engineering support role * Knowledge of manufacturing processes * Ability to interpret engineering drawings * Confident communication skills and a willingness to learn * A positive, can-do attitude If this Technical Support Engineering Advisor role sounds like a suitable opportunity for you, please...

Engineering Project Manager 6 Month initial Contract Work Location: Stevenage Overview of department:   The role sits within the Electronics Engineering department. They are growing, dedicated and we work as a team to deliver projects. You will be managing detailed design of electronics products such as printers, small thermostats ect.   Responsibilities: Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy.   Skillset/experience required: Someone with drive, passion and commitment who has: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management...

Role:               Electrical Systems Engineering consultant Based;            Home based with travel to site as needed - Cambridgeshire PE19 Contract:        12 months+ Rate;              Negotiable Our client is building a team and requires two candidates who will be part of a multi-disciplined team conducting various studies from concept design to feasibility studies. Be responsible for the electrical system studies and design of the generation & distribution infrastructure operation philosophy. Role & Responsibilities: Support sales team with early engagement with customers by understanding and interpreting customer needs and objectives. Be creative, analytical, and flexible in generating designs and solutions and effectively communicating features and limitations of various solutions. Ensure customer needs are understood and met from a FES perspective. Document and share best practices and lessons learnt from projects System Studies and Analysis – performing...

Engineering Manager – Enstone Up to £410 per day (Inside IR35) Monday to Friday (Days) This is a hands-on Engineering Manager role, ideal for someone who enjoys leading from the front. While you’ll be responsible for managing a small team of engineers, you’ll also be expected to remain technically involved — supporting breakdowns, overseeing maintenance activity, and getting on the tools when required.  Key points: Lead a team of engineers Oversee maintenance, reliability, and statutory inspections  Very hands-on role — not office based Day-to-day decision-making on site, providing technical guidance, and stepping in to support complex or urgent engineering issues. Motivating & engaging the teamRequirements: Mechanical or electrical engineering background CI & Lean Engineering Experience  H&S Knowledge  Responsible for maintenance, reliability, and statutory compliance Proven experience managing engineers in manufacturing / FMCG / heavy industry Strong H&S and...

Suspension Engineers Certain Advantage is hiring for a Suspension Engineers based in the Warwickshire area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that blends British craftsmanship with cutting-edge innovation to create luxury vehicles that redefine performance and style. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role. The Role: This role is for a Suspension Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Complex work in the research and development of suspension engineering systemsThe Individual We’re looking for people who can show: Project environment Working knowledge of product creation & delivery, change control, and change management CAD / CAE design and analysis experience, preferably with Dassault...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

We are looking for an experienced and motivated Engineering Team Leader to join an engineering department in a modern, clean FMCG environment in Tewkesbury. LOCATION: Tewkesbury Industrial Estate PAY: £20.51 + OT of x1.25 above 40 hours HOURS: Week 1: Mon-Sat 06:00-14:00 (6 shifts), Week 2: Mon-Fri 13:45-21:45 (5 shifts) DURATION: Temp to Perm after 12 weeks What You Will Be Doing Support the Engineering Manager in delivering departmental goals Supervise, train and mentor Engineers, utilising team skills effectively Coordinate and deliver planned preventative maintenance schedules Repair and test electrical and mechanical plant equipment Lead effective fault finding and resolution for high-speed automated machinery Assist with departmental paperwork, records and compliance requirements Mentor Apprenticeship candidates as appropriate Deputise for the Engineering Manager and cover for Engineers when required Participate in equipment breakdown call-out rotaWhat You Will Bring...

TEMP TO PERM OPPORTUNITY* *DAY SHIFTS - MONDAY - FRIDAY * *£12.50 - £13.00 PER HOUR* Rose 360 are recruiting on behalf of a Manufacturing company based in Nottinghamshire. We are recruiting Engineering Operatives to join the team on a temporary to permanent basis. Main duties include: Using a variety of hand and power tools Drilling holds into steel products Assisting fabricators Using grinders Assembling products Working within a engineering company Completing general housekeeping duties Our successful candidate will have: Previous experience working within an engineering or manufacturing company Ability to use a range of hand and power tools Strong attention to detail Should you feel you are suitable for this position, please apply online and we will review your application. We look forward to hearing from you. Rose 360 are acting as an Employment Business in relation to this vacancy

We are seeking 2 experienced Engineering Site Labourers to work on a contract based in Newark. The contract begins on March 16th and run to the end of July however the contract may run on beyond this date. Hours of work are on days with start times to be confirmed 12 hours Monday to Thursday 8 hours on a Friday This is an all hours rate: PAYE £15.00 PER HOUR with Holiday Pay accruing ( £840.00 BEFORE DEDUCTIONS WEEKLY ) UTR £18.00 PER HOUR ( £1008.00 WEEKLY ) Applicants must have similar experience working on a site and used to working in a fast moving environment. You must have safety footear and the correct Workwear for site work You must be able to commit to the entire contract duration and be able to get to NEWARK daily or be local. You must be physically fit and able to do some lifting work. For more information please apply online and you will be contacted immediately

Engineering Manager – Water & Wastewater | Manchester (Hybrid) Location: Manchester – Hybrid working possible Type: Permanent or Contract (Outside IR35) Want to lead a multidisciplinary engineering team delivering critical UK water and wastewater infrastructure? Ready to take full ownership of technical leadership, design strategy, and team development on nationally important projects? Our client is expanding their specialist design function and is looking for an Engineering Manager to oversee mechanical, civil, and process design, ensuring high-quality, integrated solutions across major UK water industry projects. What You’ll Do Lead and develop engineers, CAD technicians, and graduates across multiple projects Act as Professional Head for the design function, guiding compliance with technical, professional, and water company standards Approve design packages and ensure full integration across disciplines Identify and implement safe, efficient, and value-engineered...

Engineering Data Manager We are seeking an experienced Engineering Data Manager to lead the development and optimisation of digital engineering data systems across a major infrastructure programme. This role will drive improvements in GIS, reporting automation, digital assurance tools, and cross-functional data environments - enabling smarter decisions, reduced manual effort, and stronger data governance. Key Responsibilities Digital Platform Development Lead ongoing development of GIS to ensure project design data (models, hazards, stakeholder mapping, etc.) is accessible on a single integrated platform. Enhance asset tagging systems to support cost comparison (capital, lifecycle, carbon) and future-ready data handover. Improve digital security and ensure compliance with latest data standards. Reporting & Assurance Tools Automate performance reporting from ProjectWise CDE into reporting tools (including Python scripting). Develop and optimise registers and trackers...

In this apprenticeship, you'll work at the heart of our construction operations—monitoring activity on site to ensure the safety and wellbeing of our teams, supporting the smooth delivery of projects, and helping maintain the high standards of quality Browne is known for. You'll be a visible presence in the field, working closely with operational teams, gaining experience in coordinating works, and interacting with stakeholders such as homeowners, businesses and local authorities. This structured programme blends practical site experience with day-release study towards your Level 4 Construction Site Supervisor qualification, offering a clear pathway into a rewarding long-term career. As a frontline supervisor of the future, you'll be central to delivering projects that protect the environment and improve essential infrastructure across our communities. Please note that the contractual location for this role can be Falmer. Our sites are based in Kent, Sussex and Hampshire and you...

Civil / Senior Civil Engineer - Wastewater Infrastructure Brighton | Hybrid Working | Outside IR35   Are you a Civil Design Engineer with UK wastewater infrastructure experience ready to play a key role in AMP8 delivery?   Whether you're developing your capability, operating at senior level, or already performing as a Design Manager - this is an opportunity to join a growing consultancy delivering technically complex wastewater network schemes.   An expanding detailed design team in Brighton is looking to appoint engineers across varying levels of experience to support the design and delivery of: ·Sewerage rising mains and trunk sewers ·Wastewater pipeline rehabilitation and renewals ·Pumping stations and gravity sewer systems ·Feasibility studies, optioneering and asset assessments You'll work within a technically strong team delivering compliant designs aligned to Sewerage Sector Guidance, Water UK standards and UK regulatory frameworks.   Senior-level engineers...

Continuous Improvements Engineer/Lean Engineer Location: Crawley Duration: 12 Months initially Pay Rate: £31.85 per hour PAYE Join Our leading Engineering Rail/Engineering client's team as a Continuous Improvement Engineer/Lean Engineer. Are you passionate about transforming working practices and driving continuous improvement through lean methodologies? Do you thrive on creating practical solutions that deliver real impact? If so, we want you to be a key player in our client's dynamic management team! About the Role: As our client's new Continuous Improvement Engineer, you will lead the charge in developing innovative solutions to tackle inefficient processes and complex challenges across our client's busy Rail depot. Your mission? To streamline operations, unlock significant savings, and ensure smooth implementation of improvement initiatives that empower our teams. What You'll Do: Drive the creation, development, procurement, and implementation of ideas that enhance...

Holt Engineering are working with a detailed manufacturing company in Horsham. They are looking for a reliable and detail-oriented Machine Operator. This position involves operating machinery, building and testing finished goods, and ensuring all products meet quality standards in a fast-paced manufacturing environment.  This is Full time role working Monday to Friday 2:30pm - 10pm  Paying £12.21ph increasing to £12.65ph after 12 weeks with the company.  Key Responsibilities for the Machine Operator:  Operate machines and assemble finished goods in accordance with SOPs and standard build times Perform visual inspections to verify product quality and identify defects Operate testing equipment and accurately interpret pass/fail criteria Maintain accurate production and quality records Follow all safety protocols and company policies Participate in daily shift briefings and end-of-shift handovers Collaborate effectively within a team What We’re Looking for the Machine...