31 mechanical fitter jobs found in Burton upon Trent

DO YOU HAVE HEAVY MECHANICAL FITTING EXPERIENCE - LOOKING FOR A ROLE WITH PROGRESSION - DON'T MIND GETTING YOU HANDS DIRTY AT WORK? Is yes then please read on! Job title: Heavy Mechanical Technician Job location: Burton-On-Trent Hourly pay rate: £22.50 Paye / £30.13 Umbrella Hours per week: Average 45 hours per week Shifts: Monday to Thursday - DAYS only Industries considered: Rolling Stock, HGV, Plant, Agricultural Engineering, Aviation, Defence RAF, REME, Army, Navy, Marine, Avionics, and Process Engineering Disciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, HGV Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Position Summary: This position will be completing heavy mechanical modifications of Rolling Stock Vehicles 221 and 170 units. You will be expected to complete tasks from written work instruction, including Mechanical strips and refits on components. You will also specifically work on...

Job Title: Mechanical Fitter Location: Barton Under Needwood, Staffordshire Duration: Contract ( 3 months min) Rate:TBC Working Hours: * Monday to Thursday - 07:00 to 16:00 * Friday - 07:00 to 13:00 * Overtime is available. We are currently recruiting for a number of Mechanical Fitters for contract work based in Barton-Under-Needwood working for a large engineering company. Own transport is recommended due to the location. Key Duties & Responsibilities: * Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace * Ensure all Health and safety obligations are met, and company policies are adhered to * Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence * Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company's ISO...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: £17- £18.79 plus shift allowance. Late shift: Monday - Thursday 14.30pm to 01.00am ( after completing 4 weeks training on days 7am till 4pm Monday to Thursday and 7am till 1pm on a Friday) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a...

We are currently looking for experienced Mechanical Fitters to work for one of our clients in Burton on Trent on a temp to perm basis The client is a market-leading manufacturer of specialist equipment to a range of industry sectors including heavy engineering and aerospace. Due to the specialist nature of the products the work is both interesting and varied and will involve the build and assembly of a wide range of components on large special purpose machinery along with some maintenance work. Working from drawings from base materials through to finished product the main duties of this mechanical fitters role will include the following:- * Assembly of smaller components * Building of sub-assemblies and main product * Preparation of finished product for dispatch * Attending various sites to carry out both installation and maintenance duties The ideal candidates must be experienced Mechanical Fitters, preferable having served a recognised apprenticeship and possess relevant...

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies...

Mechanical Fitter - Temporary with the potential to become permanent Corby - Northamptonshire UK £28,500 - £32,500 per annum DOE Monday to Thursday 07:30 - 16:30 Friday 07:30 - 13:30 Are you looking for a hands-on role where quality matters? Are you available for an immediate start? We are currently looking for people who have previously worked as Mechanical Fitters, Mechanical Technicians, Engineering Fitters or Mechanical Engineers to join a well-established engineering company. Our client has over 20 year's experience producing premium, durable products that are placed within manufacturing and logistics facilities to ensure continuous work flow. To be considered for this role you are required to be a UK resident with right to work documentation in place and be within a commutable distance of Corby. The Role To carry out heavy mechanical fitting and mechanical assembly work on roller conveyor systems Work from diagrams and technical specifications Check quality at every...

Raft Fitter (Mechanical Fitter) - Near Burton upon Trent Afternoon Shift | Immediate Start | Minimum 6-Month Contract | Likely Temp to Perm Pay Rates: £17.00 per hour for the first 12 weeks £18.79 per hour from week 13 onwards Plus 20% shift allowance We are recruiting for a Raft Fitter / Mechanical Fitter to join a leading manufacturer and front-line supplier of powertrain products within the UK and Ireland, specialising in engine overhaul, final drive overhaul, and locomotive refurbishment. The role will involve stripping rafts and building transmissions within the rail industry, working as part of a team to break down and rebuild mechanical systems on locomotive rafts. Duties include: * Engine strip down and rebuild of components * Fitting refurbished engines back onto rafts * Working on radiators, pumps, tanks, pipework, electrical looms and associated components * Repairing and installing hydraulic systems * Overhaul of raft components * Reading and understanding...

Job Title: Mechanical Fitter Location: Barton Under Needwood, Staffordshire Duration: Contract ( 3 months min) Rate:TBC Working Hours: * Monday to Thursday - 07:00 to 16:00 * Friday - 07:00 to 13:00 * Overtime is available. We are currently recruiting for a number of Mechanical Fitters for contract work based in Barton-Under-Needwood working for a large engineering company. Own transport is recommended due to the location. Key Duties & Responsibilities: * Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace * Ensure all Health and safety obligations are met, and company policies are adhered to * Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence * Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company's ISO...

Job Title: Mechanical Fitter Location: Barton Under Needwood, Staffordshire Duration: Contract ( 3 months min) Rate:TBC Working Hours: * Monday to Thursday - 07:00 to 16:00 * Friday - 07:00 to 13:00 * Overtime is available. We are currently recruiting for a number of Mechanical Fitters for contract work based in Barton-Under-Needwood working for a large engineering company. Own transport is recommended due to the location. Key Duties & Responsibilities: * Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace * Ensure all Health and safety obligations are met, and company policies are adhered to * Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence * Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company's ISO...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 4pm Monday to Thursday and 7am till 1pm on a Friday Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a realistic timeframe. To mentor trainees / apprentices when applicable. To ensure that waste is disposed of in the...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: £17- £18.79 plus shift allowance. Late shift: Monday - Thursday 14.30pm to 01.00am ( after completing 4 weeks training on days 7am till 4pm Monday to Thursday and 7am till 1pm on a Friday) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a...

Interaction Engineering  Mechanical Fitter / Ducting Installer Required – Staffordshire We are currently recruiting experienced Mechanical Fitters / Ducting Installers for a new-build petrochemical project based in Derbyshire. Project Details: New construction – 3-storey building Installation of ventilation systems (ducting size approx. 500 x 700) Site-based role on a petrochemical facility Start Date: 12th May 2026 Working Hours: Monday to Friday 7:00am – 5:00pm Pay Rate: £250 – £350 per day (depending on experience) Requirements: Valid CSCS card (essential) Proven experience installing ductwork and ventilation systems Ability to read and work from technical drawings Experience working on industrial or petrochemical sites preferred Confined spaces certification (IPAF / equivalent) advantageous Role Responsibilities: Installation of ventilation and ducting systems Working to site drawings and specifications Adhering to strict health & safety regulations on-site This is...

Interaction Engineering  Mechanical Fitter / Ducting Installer Required – Derbyshire We are currently recruiting experienced Mechanical Fitters / Ducting Installers for a new-build petrochemical project based in Derbyshire. Project Details: New construction – 3-storey building Installation of ventilation systems (ducting size approx. 500 x 700) Site-based role on a petrochemical facility Start Date: 12th May 2026 Working Hours: Monday to Friday 7:00am – 5:00pm Pay Rate: £250 – £350 per day (depending on experience) Requirements: Valid CSCS card (essential) Proven experience installing ductwork and ventilation systems Ability to read and work from technical drawings Experience working on industrial or petrochemical sites preferred Confined spaces certification (IPAF / equivalent) advantageous Role Responsibilities: Installation of ventilation and ducting systems Working to site drawings and specifications Adhering to strict health & safety regulations on-site This is a...

We are currently looking for Semi-Skilled/Skilled Mechanical Fitters to work with one of our clients in Burton on Trent The client is a well-established and world leader in the manufacturer of specialist electrical equipment for a variety of applications worldwide Working alongside the client’s own staff the role will include working on the installation of a range of components and will involve all aspects of basic mechanical fitting. The work will be on a day shift basis Applicants must have a proven track record in a similar role and have some previous technical or engineering experience Previous experience of machine building or assembly would be advantageous. This is an ongoing long-term contract for the right candidate. Global Recruitment Services Ltd are a Recruitment Business based in the East Midlands For more information and to apply please email your CV to us

Interaction Engineering Ducting Installers – High-Value Industrial Project | Derbyshire A major new-build petrochemical facility in Derbyshire is now underway, and we are looking for skilled Mechanical Fitters and Ducting Installers to be part of it from the ground up. This is not routine site work—this is a technically demanding, large-scale project where experienced tradespeople can earn strong rates and secure consistent work. The Project You’ll be working on a brand-new three-storey industrial build, installing large-scale ventilation systems (ducting approx. 500 x 700) within a live petrochemical environment. The work is structured, well-managed, and designed for professionals who take pride in precision and safety. Start Date: 12th May 2026 Working Pattern Monday to Friday 7:00am – 5:00pm Rates £250 – £350 per day, reflecting your experience and capability What You’ll Bring A valid CSCS card – non-negotiable Solid, hands-on experience with ductwork and ventilation...

TXM Recruit are recruiting a permanent Rail Support Technician (Electrical biased) based in Derby. Location: Derby Shifts: Monday - Thursday 08.00 – 5pm/ Friday – 08.00am – 2.30pm Salary: Competitive Salary We are looking for individuals from a rail or rolling stock background predominantly however individuals from the following Industries considered: Rolling Stock / RAIL/ Royal Navy / RAF / REME / British Army/ General Engineering/Aerospace/Automotive who have experience within the field of electrical engineering and overhaul experience. Primary Purpose of the Role: To carry out Overhauls and repairs in a workshop environment on various rail projects including: Traction motors Fans & heaters Water cooler pumps This will include the following: * Isolate power sources and lockout/tagout all electrical systems * Gather tools, cleaning agents, PPE, and documentation (electrical schematics, manuals) * Set up a clean work bench, organized workspace for disassembly Disassembly...

Job title: Electrical Modification Technician Job location: Nottingham Shifts: Days Monday to Friday or Sunday or Thursday Must be flexible to do the odd night shift if requested Hours per week: 45 to 50 hours per week Rates: First 40 hours £22.85 Paye - £29.74 Umbrella After 40 hours £28.57 - £34.65 Umbrella Duration: Ongoing Start date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Company Summary: They are a global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary This position is for an electrically biased technician, to carry out electrical modifications and system testing. You will be...

Electrical Fitter - Temporary with the potential to become permanent - Immediate Start Corby - Northamptonshire UK £28,500 - £32,500 per annum Monday to Thursday 07:30 - 16:30 Friday 07:30 - 13:30 We are looking for experienced electrical Fitters to join a well-established engineering company with over 20 year's experience producing premium, durable products that help customers work smarter, safer, and more efficiently. Due to the nature of this position, candidates are required to be resident in the Corby or local area with Right to Work Documentation in place as initially this is a role with an immediate start. The Role Wire fit and assemble heavy duty control panels and junction boxes. Wire and assemble units consiting of anywhere between 5 and 25 cables. Assemble both electrical and mechanical components including motorised units and industrial junction boxes. Assisting with quality checks, highlighting any issues to the Works Manager prior to passing to next operation....

Test Cell Engineer Location: Barton under Needwood Pay Rate: £17.00 per hour (PAYE), increasing to £18.79 per hour (PAYE) after 12 weeks Job Overview We are currently recruiting a Test Cell Engineer to support the testing and validation of rail-based power products, including diesel engines, transmissions, powerpacks, and cooler groups. This is a hands-on role suited to someone with a strong mechanical and electrical background and an interest in rail engineering. You will work within a production testing environment, using computer-controlled test cells to ensure products meet all required specifications and quality standards. Key Responsibilities Installation, setup, and testing of production power products within test cells, following detailed work instructions Ensure all products fully meet defined testing requirements Accurately record test data to ensure full traceability Assist with developing testing requirements for future products Diagnose and report mechanical and...

Laser Operator - Night Shift Location: Derby DE11 Hours: Monday to Thursday Night Shift Pay rate - up to £20.00 p/h Interviews Happening Immediately Are you a skilled Laser Setter / Operator looking for your next opportunity? We’re working with a well-established and growing engineering firm in Swadlincote who are looking to add to their friendly team. This role offers great rates of pay, steady Night shifts, and the opportunity to go permanent for the right person. What You’ll Be Doing Working from detailed engineering drawings Setting and Operating an Amada Laser Will need experience in picking up the nest and placing into the machine Occasionally working independently on varied jobs and materials What We're Looking For Fully experienced Laser setter/operator Strong background in setting / operating and nesting the laser Confident reading technical drawings 3+ years experience working with an Amada Laser Someone who can hit the ground running and work on...