35 education jobs found in Chester

Ergonomist Broughton (Full Time On Site) Contract Role (Ending 31/12/26) Inside IR35 Belcan are currently working with one of the leaders in the Aviation industry and are supporting them in their search for an Ergonomist. The Ergonomics team is based in Broughton, and is a small team but is extremely influential within the manufacturing engineering department. It also has close working relationships with operations, design engineering and health & safety across the Plant for all variants of the commercial aircraft. The team focuses on optimising human working conditions and the overall system performance for both existing and new manufacturing tooling and processes. Responsibilities Influence product development in line with 'design for manufacture' principles Develop and drive strategic plans for ergonomic risk reduction interventions Identifying work related ergonomic risk factors at the workplace and propose solutions to mitigate risks Anticipation of risk, application...

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product...

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton is currently looking to recruit a Night Shift Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £39.50ph   Night Shift Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base...

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Job Title: RAMS Engineer Location: Staffordshire (100% on-site) Contract Type: 12-Month Contract The Role We are seeking a highly motivated and experienced RAMS Engineer to join a global team of subject matter experts. This position focuses on high-voltage electrical equipment, specifically within HVDC (High Voltage Direct Current) systems. In this role, you will be responsible for coordinating, creating, verifying, and validating reliability, availability, and maintainability (RAM) models for HVDC systems and subsystems. You will manage project risks throughout the lifecycle, enforce engineering discipline, drive quality processes, and provide technical leadership and training to both customers and internal stakeholders. Key Responsibilities RAM Studies & Strategy Conduct RAMS studies for HVDC projects and tenders, covering both LCC and VSC technologies. Define spare part requirements and maintenance strategies. Establish and monitor RAMS study structures,...

RAMS Engineer Certain Advantage is hiring for a RAMS Engineer based in the Staffordshire area. This role is on a contract basis and is site-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across industries—from Power Generation, Rail and more. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a RAMS Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Conduct RAMS studies for HVDC projects and tenders, covering both LCC and VSC. Define spare part requirements and maintenance strategies. Establish and monitor RAMS study structures, processes, and KPI. Chair 3D Model Reviews with a specific focus on maintainability. Lead engagement with OEMs, and manage interface control documents. Direct...

Order Ref: (phone number removed) Position Title: Electrical Engineering PVT Engineer Duration: Contract Location: Halewood, Liverpool Based in Liverpool (hybrid working) £33.88 per hour (Inside IR35), 40 hrs pw *Applicants MUST have proof of immediate, on-going and valid eligibility, to work full time, and travel within, the UK* Position Description: The Electrical Engineering PVT team at the Clients' Halewood assembly plant are part of the product development engineering function. The team operate in an exciting & dynamic environment providing the interface between the core engineering team and manufacturing. As a PVT engineer you will work on electrical system quality issues affecting the vehicle assembly plant and our external customers the electrical systems we are responsible for include control modules, software, switches and electrical wiring harnesses. You will monitor quality metrics to identify emerging issues, apply problem solving skills to those...

We are currently seeking experienced Pipefitters to support the redevelopment of a disused Biomass Plant in Northwich, Cheshire. This is an excellent opportunity to secure long-term work on a major industrial redevelopment project, with immediate starts available. Location: Northwich, Cheshire Start Date: Immediate Duration: Potential for 3–6 months ongoing work Working Hours: Monday to Thursday: 07:30 – 16:00 Friday: 07:30 – 15:00 Some Saturday overtime available Pay Rates (LTD / CIS / Umbrella): Basic: £24.05 per hour OT1: £28.70 per hour OT2: £33.35 per hour Requirements: * Valid SCATTS, CSCS, CCNSG or EMSS card (essential) * Previous industrial pipefitting experience * Ability to work safely and effectively on site * Reliable with a strong work ethic If you are available for an immediate start and interested in this opportunity, apply now with your CV or contact us today for more information

LOCAL CANDIDATES ONLY, CLIENT NOT SUPPLYING DIGS*** Ambitek are currently recruiting on behalf of our client for an experienced HDPE Pipefitter / Fusion Welder to join an ongoing project in Northwich, supporting the redevelopment of a disused Biomass Plant. Location: Northwich, Cheshire Start Date: Immediate Duration: 3-week trial (with potential for 3–6 months ongoing work) Role Overview This position will focus on the installation and on-site fusion welding of HDPE pipework, working on straight runs installed mainly on pipe bridges. Day-to-Day Duties * Installation of HDPE pipework on site * Fusion welding HDPE lines ranging from 1” up to 10” * Working safely and efficiently to site requirements * Use of HDPE fusion welding machines and associated equipment Requirements * Proven experience in HDPE fusion welding (essential) * Confident using HDPE fusion welding machines * Valid SCATTS or CSCS or CCNSG or EMSS...

Lead EC&I Engineer (Design) – Contract (Inside IR35) Location: Warrington (Hybrid – 3 days office / 2 days remote) Rate: £55.00 – £60.00 per hour (Umbrella) Hours: 40 hours per week Duration: 12 months + Overview We are seeking an experienced Lead EC&I Engineer to support the delivery of complex design work across major nuclear projects. This is a key leadership role, responsible for overseeing EC&I design activities, ensuring technical quality, and guiding a multidisciplinary team within a highly regulated environment. Key Responsibilities Lead and manage EC&I design activities across nuclear projects from concept through to detailed design Provide technical authority and guidance to engineering teams Review and approve design documentation, including calculations, specifications, and drawings Ensure compliance with relevant industry standards, safety regulations, and client requirements Interface with clients, stakeholders, and multidisciplinary teams to...

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies...

Role Title: Lead Software and DevOps Engineer Duration: contract to run until 23/04/2027 Location: Sheffield, Hybrid 3 days per week onsite Rate: up to £529 p/d Umbrella inside IR35 Role purpose / summary If you're looking for a career that will help you stand out, join our client, and fulfil your potential - whether you want a career that could take you to the top, or simply take you in an exciting new direction, our client offers opportunities, support and rewards that will take you further. Our client is one of the largest banking and financial services organisations in the world, with operations in 64 countries and territories. We aim to be where the growth is, enabling businesses to thrive and economies to prosper, and, ultimately, helping people to fulfil their hopes and realise their ambitions. We are seeking an accomplished Cybersecurity Lead Software and DevOps Engineer to drive the Responsible for designing and delivering enterprise security solutions, creating...

Mechanical CAD Technician (Contract) Up to £35 per hour (Outside IR35) | Ongoing Contract St Asaph, North Wales   A reputable contractor within the UK water industry is currently seeking a Mechanical CAD Technician to support ongoing projects on the Welsh Water framework. This is an excellent opportunity for an experienced CAD professional looking for a long-term contract role with flexibility and competitive rates.   The Role   The successful candidate will be responsible for producing accurate mechanical drawings and models (both 2D and 3D) to support a range of water infrastructure projects. Working closely with engineers and project teams, they will play a key role in ensuring designs are delivered efficiently and to a high standard. This position offers a hybrid working arrangement, with 2-3 days per week required on-site in St Asaph, and the remaining time working remotely.   Key Responsibilities Producing and updating mechanical drawings and 3D models...

Site/Sub Agent – Bryn Station, Wigan Duration: 6–12 months (days and occasional mid-week nights) Overview: Experienced Sub Agent with PTS/CSCS competency, responsible for supporting the Project Manager in delivering railway infrastructure projects safely, on time, and within budget. Acts as the primary point of contact for clients, Network Rail, and TOC representatives, ensuring project quality, compliance, and effective stakeholder engagement. Key Responsibilities: Lead and coordinate multi-disciplinary teams to achieve project objectives. Oversee construction quality, compliance with specifications, and defect resolution. Develop Inspection Test Plans (ITPs), Work Package Plans (WPPs), and material check sheets. Monitor project scope, progress, and changes, reporting variances and maintaining accurate construction logs. Manage subcontractor packages, reviewing design, documentation, and RAMS for safe integration. Conduct risk management, including environmental...

Job Title - CNC Machinist Duration - 2 Months (may extend) Start Date - ASAP Working Model - Onsite Newcastle under Lyme (Staffordshire) Hours/Times - 39 hours per week across 4 days. The ideal shift pattern is 6:00pm–4:30am, though this is flexible and open to discussion. Hourly Rate - Circa £20p/hour  CNC Machinist Overview We are looking for an experienced CNC Machinist to cover a short-term night shift contract. You will be responsible for setting and operating Fanuc-controlled CNC lathes (mainly Doosan Puma machines) to produce precision components to specification and maintain consistent quality output. The role includes machine setup, tool changes, adjusting offsets, reading engineering drawings, and carrying out basic quality checks on finished parts. This is a hands-on, skilled machining role requiring previous CNC lathe experience and the ability to work independently on nights. The CNC Machinist role will involve: Setting and operating Fanuc-controlled CNC lathes...

This role is a Design Quality Engineer / Engineering Checker which is responsible for ensuring engineering output is accurate, consistent and compliant with customer specifications, internal standards and statutory regulations. Suited to an experienced mechanical engineering professional from a sheet metal or steel fabrication background, the position requires strong attention to detail, excellent knowledge of engineering drawings and manufacturing processes, and a proactive approach to quality and continuous improvement. Key Responsibilities Review and approve 3D models, engineering drawings, BOMs and technical documentation for accuracy, manufacturability and compliance with standards. Carry out tolerance stack analysis checks to ensure products remain functional, compliant and manufacturable. Maintain and improve engineering drawing standards in line with BS 8888:2017 and ISO 9001 procedures. Support the reduction of NCRs and drawing-related errors through detailed checking...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract.     This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background.   Rate: £65.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally).  The department are happy for a Compressed week to be worked, for 4 days per week (Monday to Thursday) Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella)   Test Equipment Design Support Engineer Job Description:   We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the...

World Class Defence Organisation based in Bolton is currently looking to recruit a Test Equipment Obsolescence Manager subcontractor on an initial 6 month contract.  The role will be a hybrid position of 2 days in office, rest of the week remote.   Rate: £60 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton Hybrid / Remote working: Hybrid, 2 days per week onsite and the rest remote from home. Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella)   Test Equipment Obsolescence Manager Job Description:   We have a phenomenal opportunity for experienced Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role working close to the manufacturing environment helping to shape the design of...