46 jobs found in Consett

Commissioning & Systems Completion Lead Position Type: Contract Location: Northumberland Categories: Engineering, CQV PM Group requires a Commissioning Lead will be responsible for monitoring the Principal Contractors (PC) commissioning process and execution of the scope being HVAC, mechanical, electrical, data, BMS, Business Technology (BT) and utility/sprinkler systems. The role ensures systems are commissioned safely, efficiently, timely and in compliance with Project URS, GMP, GxP, FDA, EU GMP, and project-specific requirements. The Commissioning Lead acts as the primary interface with the PC between construction, engineering, CQV, Business Technology (BT) and quality assurance personnel. The commissioning lead will also liaise with client operations/BT, and equipment vendors to assist in the delivery of operational and validated systems from installation through start-up and handover. Note that this role will be full time site based to monitor the progress....

MMEDIATE START At Engineering Direct Ltd we are looking for an experienced Project Manager to oversee and run the installation of hygiene, water, steam condensate pipework on a Utilities site which will put into place using a crane. This role may also require you to be hands on so previous experience is essential. ESSENTIAL REQUIREMENTS * It is essential that you have previous experience of Project Managing * It is essential that you have previous hygiene pipework knowledge * Previous experience of the installation of water, steam and condensate pipework * Must have worked in Engineering for a minimum of 2 years * Must hold either a MEWP or a Telehandler licence RATES * Monday to Friday * 50hrs+ a week * £40/hr * Minimum of 6 months This project is an excellent opportunity for someone based local to the North East region. Please send in your CV's ASAP

Heating Engineer This post is subject to a disclosure. Listed below are the responsibilities this role will be primarily responsible for: The installation, repair, maintenance and servicing of mechanical and plumbing appliances and/or systems to drawing, specification or as instructed including where applicable electrical connections. Attend to out of hours emergency call-outs on a rota basis. (Voluntary) To work in accordance with the information, instruction and training given and to inform the Mechanical Services Foreman of any potential safety hazards not adequately controlled. Carry out Site Specific Risk Assessments and undertake works in a safe manner and using agreed methodologies wearing the appropriate PPE. Complete timesheets and other relevant documentation including service sheets. You may be required from time to time to undertake plumbing/heating works depending on levels of demand and staffing resources in both commercial and domestic premises. Qualification *...

New contract opportunities are available for Project Design Managers to join a progressive Water Treatment consultancy firm. This is an exciting time to join the business; they have tripled their workforce in the past 12 months and are working with some of the leading water companies and Tier 1 Contractors in the sector. The opportunities offer remote work so can be flexible in location so long as applicants are situated in the UK and must have proof of right to work in the UK. With outside IR35 long-term contracts available. Key Responsibilities of the Project Manager: Lead the design and delivery of wastewater treatment projects from concept to detailed design and construction support. Act as the technical authority for mechanical engineering while providing coordination oversight for civil, electrical, and ICA disciplines. Ensure the design aligns with client specifications, statutory requirements, and industry best practices. Manage and integrate the work of mechanical,...

THIS IS A 8 WEEK CONTRACT WITH POSSIBLE EXTENSIONS. THE ROLE COULD BECOME PERMANENT FOR THE RIGHT PERSON. We are currently seeking a dedicated Production Operative to join a growing manufacturing team based in Gateshead. This role plays a key part in assembling high-quality products to customer specifications and supporting engineering during build and testing activities. Reporting to the Manufacturing Team Leader, you will be responsible for meeting production targets while maintaining high standards of quality, safety, and efficiency. Key Responsibilities As a Production Operative, you will: * Independently carry out assembly work to meet daily production targets * Interpret and follow engineering drawings and standard operating procedures * Complete basic documentation using PC systems and internal databases * Conduct complex quality checks to ensure products meet required standards * Prepare work areas for the next shift, including housekeeping, materials,...

Time-served electrician with commercial & industrial experience required for projects on the TVTE and the Newcastle area. Work expected to last unitl September/October time. 38hrs per week Monday - Friday. JIB and IPAF required

Job Title: NRSWA Inspector Location: North East of England Contract: Initial 6-Month Contract Rate: £25 -£30 per hour dependent on experience Vehicle: Company Van Provided Job Overview: Our client in the North East of England is seeking a NRSWA Inspector to join their team on an initial 6-month contract. The role offers a competitive rate of £30 per hour and includes a company van for site travel. This position is well-suited for individuals with experience in street works inspection, compliance, and utilities, looking for a hands-on role with varied responsibilities across a busy road network. Key Responsibilities: ·Inspection of Works: Conduct daily inspections of street and road works, including those carried out by utility companies and other contractors, to ensure compliance with  regulations and safety standards. ·Internal Works Monitoring: Inspect works including pothole repairs and footway resurfacing. ·Inspection Management: Utilize provided tablet to record...

F-Gas Air Conditioning Installer Location: North London Rate: £250 – £280 per day Overview We are looking for experienced F-Gas Air Conditioning Installers to carry out AC installations across North London Key Responsibilities Install split and multi-split air conditioning systems. Complete pipework, pressure testing, vacuuming, and refrigerant charging. Commission and test systems to manufacturer specifications. Ensure all work complies with F-Gas regulations and Health & Safety standards. Complete installation and commissioning paperwork. Maintain high standards of workmanship and customer service. Work independently and manage installation schedules effectively. Skills & Experience Minimum 3 years' experience installing air conditioning systems. Valid F-Gas certification. Strong experience with AC installation and commissioning. Competent with pressure testing, vacuuming, and refrigerant charging. Clean DBS Full UK driving licence Package £250 – £280 per installation...

Manufacturing Engineer (Contract) Location: Newcastle upon Tyne Salary: £40,000 per annum Hours: Day Shift (Monday - Friday 37 hours) Contract Type: Temporary We are looking for an experienced Manufacturing Engineer to join a leading engineering client based in Newcastle upon Tyne on a temporary contract. Working standard day shifts, you will take full ownership of production engineering support, driving manufacturing methods, project managing capital investments, and keeping pre-production schedules running smoothly. Key Responsibilities Production Engineering & Process Design: Define and apply robust manufacturing methods, tooling, and process technologies (machining, finishing, and processing components). CAM Programming & Digital Engineering: Create machine tool part programs using Siemens NX and CREO. Develop and maintain machine tool post-processors and 3D models for manufacturing/measurement. Capital & Revenue Expenditure: Define financial justifications,...

Service & Maintenance Engineer – Emergency Lighting & Fire Alarms (Subcontract) V7 are seeking skilled Service & Maintenance Engineers to work on a large-scale public sector project in the North East. This is a long-running contract with our national client, offering consistent, ongoing work and great potential for long-term subcontract opportunities. The role involves servicing and maintaining emergency lighting systems and fire alarm systems across a range of public buildings, including housing, education facilities, and care environments. Role Overview Carry out routine servicing, testing, and compliance checks on emergency lighting in line with BS 5266. Service, fault-find, and repair both addressable and conventional fire alarm systems in accordance with BS 5839. Respond to reactive maintenance calls and complete remedial works where necessary. Provide clear service reports and communicate findings with site contacts. Ensure all work is carried out to relevant...

Rullion are looking for an eperienced Reliability Engineer to join our rolling stock client on a 12 month fixed term contract. A great opportunity to join an industry leader! The role will involve technical engineering leadership, data analysis, stakeholder management, customer and supplier liaison, root cause investigation, and reliability growth activities The successful Reliability Engineer, will be proficient in Power BI including dashboard development and trend analysis. Strong communication skills are key, as you will be liaising with customers, suppliers, and internal engineering teams. If this sounds like you- hit apply

TIG Welder Location: Walker Job Type: Permanent Shifts: Days & Nights Available We are currently recruiting for experienced TIG Welders for a permanent opportunity based in Walker. This role will involve small bore pipework, with preference given to candidates who have experience working with exotic materials such as duplex and Inconel. Please note: Coding certificates are not required, as weld tests will be carried out on site. Pay Rates: * Basic Rate: £22.74 per hour * OT1 (Mon–Fri): £34.11 per hour * OT2 (Weekends): £45.48 per hour * OT3 (Bank Holidays): £68.22 per hour The Role: * TIG welding on small bore pipework * Working with stainless and exotic materials * Permanent, long-term opportunity * Days and night shifts available Requirements: * Proven TIG welding experience * Experience with small bore pipework * Experience with duplex and/or Inconel (preferred) * Ability to pass a weld test This is an excellent opportunity to secure a permanent role...

Contract Civil Design Engineer Infrastructure & Drainage Rate: £45–£50 per hour – Outside IR35 Contract: Initial 6 months (strong likelihood of extension) Location: Newcastle (Hybrid / Office-based as required) An award-winning civil engineering design consultancy is seeking an experienced Contract Civil Design Engineer to support a strong pipeline of residential and mixed-use infrastructure projects. This is a hands-on role suited to an engineer who can take schemes from feasibility through to detailed design and technical approvals, working within a high-quality consultancy environment known for design excellence. Key Responsibilities Deliver civil infrastructure and drainage design for residential & mixed-use developments Design foul and surface water systems using MicroDrainage / InfoDrainage Produce highways, levels, earthworks and estate road designs using Civil 3D Prepare drawings, calculations and reports for S104, S38 and S278 approvals Liaise with...

Time - served pipefitters required for min of 2 months work in Newcastle city centre. OT available through the week and at weekends. CSCS and IPAF required

Time-served electricians required for Newcastle City Centre. 3 months work JIB and IPAF required OT available for Monday - Friday & weekends

Role: M&E Asset Surveyor Location: North East Contract: Temp, Full-Time for 3 months TSA Surveying are currently in partnership with a leading FM provider, who are looking to recruit several M&E Asset Surveyors to support a nationwide asset surveying programme across a portfolio of banking sites. The successful candidates will be responsible for carrying out mechanical and electrical asset verification, condition and lifecycle surveys across sites throughout the North East. This is a full-time contract running until the end of October. We are looking for experienced M&E Asset Surveyors, or individuals with a background in building services, whether from an FM provider, M&E consultancy, contractor, or directly for a building owner. You will carry out room-by-room surveys, recording mechanical and electrical assets, assessing their condition and remaining lifecycle, with all information captured using tablet-based surveying software. Responsibilities * Carry out...

Time-served Plumbers required for central Newcastle for a for a major commercial project. Long - term work. 46 hours per week, with overtime available

We are currently recruiting for a Welder Fabricator for a company based in Washington. Key responsibilities: * Read and interpret engineering drawings, blueprints, and technical specifications. * Measure, mark, cut, prepare, and fabricate metal components using appropriate workshop equipment. * Perform MIG welding to a high standard. * Assemble fabricated parts and structures accurately. * Inspect completed welds and fabricated components to ensure compliance with quality standards. * Carry out grinding, finishing, and dressing of welds where required. * Ensure all work is completed within agreed production timescales. * Maintain a clean, organised, and safe working environment. * Follow company health and safety procedures and wear appropriate PPE at all times. * Report equipment faults, material shortages, or quality concerns promptly. * Assist with continuous improvement initiatives within the workshop

Overview We are seeking a skilled Fabricator to join our dynamic team. The ideal candidate will possess a strong background Welding and Fabrication, with the ability to work with steel plate up to 200mm. This role requires MIG Welding experience and proficiency in using hand/power tools and cutting torches Duties * Weld and Fabricate heavy steel plate according to specifications and engineering drawings. * Perform Welding tasks using MIG Welding techniques, ensuring high-quality Welds that meet industry standards. * Utilise hand/power tools and cutting torches for cutting, steel up to 200mm thick * Conduct inspections of finished products to ensure they meet quality control standards. * Maintain a clean and safe working environment by following health and safety regulations. * Collaborate with team members to optimise production processes and improve efficiency. Qualifications * Time served Welding and Fabrication * Proven experience in and Welding and...

Customer focused Engineering Stores Apprentice Sherburn (On client site) | 🕒 Full Time | 🎓 Apprenticeship Opportunity Kick-start your career in the engineering sector Hayley Dexis is the largest independent distributor of engineering products and consumables in the UK. We currently employ over 1,300 people who continue to be a cornerstone of our business and are fundamental to providing industry-leading customer service. Hayley Dexis is looking for a Customer-Facing Engineering Stores Apprentice to join our onsite team supporting a busy manufacturing environment in Sherburn. This is not your typical warehouse role — it’s an exciting opportunity to start a long-term career in engineering stores, procurement, and operations, working directly with engineers and site teams where your work has a real impact. About the role You’ll be based onsite at a customer’s facility, working in a customer-facing engineering stores environment. You’ll play a key role in making sure critical...