368 jobs found in Crewe

Looking for a new opportunity in your career? Interested in joining a dynamic team working state of the arc vehicles? Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox...

Manufacturing Feasibility Engineer Crewe £28.41 PAYE 3 days on-site (including Tuesday & Thursday) Requirements Assess final assembly design to address and resolve manufacturing feasibility issues. Cross-department build and manufacturing reviews. Identify and develop best practices. Support complex problem investigation and resolution. Ensure quality targets are achieved and assembly time targets are met. Experience Automotive industry experience within a manufacturing environment. Strong working knowledge of design and assembly principles Lean manufacturing techniques Working knowledge of CATIA V5 HNC/ Degree in a Manufacturing or Engineering subject. German speaking (preferred) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical...

Job Title: Mechanical Fitter (Full Training Provided) Location: Crewe, Cheshire Hours: Monday to Friday 8:00am - 4:30pm (37 hours per week) - flexibility required to work shifts Pay Rate: £16.57 per hour PAYE / £21.44 per hour Umbrella (Training rate - approx. first 6 weeks) £18.82 per hour PAYE / £24.40 per hour Umbrella (Post training) Duration: Ongoing Start Date: March / April 2026 Training Day: Very likely to be 27th March 2026 We are recruiting over Mechanical Fitters for long-term contracts at the Crewe depot. This is a genuine opportunity to move into the Rail industry - full training will be provided. You do not need rail experience. You do not need formal qualifications. If you have at least 18 months' hands-on mechanical experience using tools in a practical environment, we can train you. The role involves the mechanical overhaul of rail bogies, including: Bogie overhaul, damage repair and engineering Wheelset overhaul and repair Gearbox and component repairs...

Job Title: Mechanical Fitter (Full Training Provided) Location: Crewe, Cheshire Hours: Monday to Friday 8:00am - 4:30pm (37 hours per week) - flexibility required to work shifts Pay Rate: £16.57 per hour PAYE / £21.44 per hour Umbrella (Training rate - approx. first 6 weeks) £18.82 per hour PAYE / £24.40 per hour Umbrella (Post training) Duration: Ongoing Start Date: March / April 2026 Training Day: Very likely to be 27th March 2026 We are recruiting over Mechanical Fitters for long-term contracts at the Crewe depot. This is a genuine opportunity to move into the Rail industry - full training will be provided. You do not need rail experience. You do not need formal qualifications. If you have at least 18 months' hands-on mechanical experience using tools in a practical environment, we can train you. The role involves the mechanical overhaul of rail bogies, including: Bogie overhaul, damage repair and engineering Wheelset overhaul and repair Gearbox and component repairs...

Job Title: Rolling Stock Fitter Excellent opportunity for an experienced Mechanical Fitter from a manufacturing / engineering environment. Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Mechanical Fitter – Main Duties: Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies overhaul repair and analysis * Re-engineering and production of spare parts To undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train. They require a Mechanical Fitter...

Job Title: Rolling Stock Fitter Excellent opportunity for an experienced Mechanical Fitter from a manufacturing / engineering environment. Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Mechanical Fitter – Main Duties: Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel mounting * Components and sub-assemblies overhaul repair and analysis * Re-engineering and production of spare parts To undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train. They require a Mechanical Fitter...

Cure Talent are delighted to be partnered with an established medical device manufacturer as they appoint a Product Development Scientist to join their R&D function on an initial 12 month fixed term contract. This is offered on an initial 12 month fixed term contract, with a strong likelihood of transitioning into a permanent position thereafter. The position has arisen due to maternity leave within the team and is positioned as a genuine opportunity to embed yourself within a growing development function. As the new Product Development Scientist, you will play a hands on role within new product development, line extensions and design changes across a portfolio of sterile, single use medical devices. This is a practical, laboratory focused role, with clear responsibility for physical testing, design control documentation and validation support. You will work closely with Regulatory, Quality, Operations and Commercial teams to ensure projects are delivered in line with...

Quality Technician (days) Winsford £14.26 per hour + overtime (x1.25/x1.5) Contract to permanent role (benefits)   Certain Advantage is partnering with an automotive manufacturer to recruit an experienced Quality Technician. You will be responsible for ensuring all products are completed to specification and up to the highest quality standard.   Key Responsibilities: Oversee the completion of each product to required specifications. Conduct thorough quality assessments throughout the production process. Carry out final checks on all finished items prior to presentation and customer dispatch. Confirm that all products comply with relevant type approval standards. Produce and submit a detailed quality report for every finished product. Comply fully with Health & Safety legislation and company safety procedures. Reduce material waste through careful and efficient use of resources and consumables.  Your Background: Highly organised, motivated, and proactive with strong...

Ambitek is recruiting for Skilled Structural MIG Welders to join our client's team in Winsford. This is a fantastic opportunity for experienced professionals looking for long-term work. Key Responsibilities: ✅ MIG welding of structural beams and end-plates ✅ Perform solid wire MIG welding in the down-hand position ✅ Complete a 10mm T-joint multi-run fillet weld to a high standard ✅ Ensure all welds meet the required quality and safety standards Requirements: ✔️ Proven experience in structural MIG welding ✔️ Ability to perform a 10mm T-joint multi-run fillet weld ✔️ Ability to pass a trades test before starting 📌 CIS or Umbrella only 💰 Rate: £19.85/hour (basic) | £27.03/hour (overtime after 39 hours) 🕒 Hours: * Mon – Thurs: 07:45 AM – 16:45 PM * Fri: 07:45 AM – 12:45 PM ⚠️ Local candidates only – Accommodation is not provided 🚀 Immediate starts available upon successful completion of the trade test. Apply now

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

6-9 Months work - Energy From Waste Plant - Northwich. Minimum 45 hrs per week. The rates for this role will be as follows based on a CIS basis. Mon-Fri(1st 39hrs) £26.00 Mon-Fri(over 39hrs) £32.50 Sat(1st 4hrs) £32.50 Sat(over 4hrs) £39.00 Sun(all hrs) £39.00 Safety passport and JIB card/proof of trade required and ideally experience within an industrial environment would be great

Ambitek are currently recruiting a Fabricator/Welder on a long-term basis for our client based in Northwich. This is predominantly workshop-based, with some site work required. Working Hours * Monday to Thursday: 07:00 – 16:00 * Friday: 07:00 – 13:00 Key Requirements * Competent in ARC (Stick) welding * Competent in MIG welding * Strong fabrication experience * Vertical stick welding experience essential * Valid CSCS and EMSS or CCNSG certification required for site work Additional Information * Long-term position * Workshop-based with occasional site work * Local candidates only – no digs provided If you’re a skilled Fabricator/Welder looking for stable long-term work in the Northwich area, we want to hear from you

LOCAL CANDIDATES ONLY, CLIENT NOT SUPPLYING DIGS*** Ambitek are currently recruiting on behalf of our client for an experienced HDPE Pipefitter / Fusion Welder to join an ongoing project in Northwich, supporting the redevelopment of a disused Biomass Plant. Location: Northwich, Cheshire Start Date: Immediate Duration: 3-week trial (with potential for 3–6 months ongoing work) Role Overview This position will focus on the installation and on-site fusion welding of HDPE pipework, working on straight runs installed mainly on pipe bridges. Day-to-Day Duties * Installation of HDPE pipework on site * Fusion welding HDPE lines ranging from 1” up to 10” * Working safely and efficiently to site requirements * Use of HDPE fusion welding machines and associated equipment Requirements * Proven experience in HDPE fusion welding (essential) * Confident using HDPE fusion welding machines * Valid SCATTS or CSCS or CCNSG or EMSS...

Manufacturing Feasibility Engineer Scope of Services The Launch Quality Centre Manufacturing Feasibility Engineer is responsible for ensuring that Manufacturing Feasibility is evaluated in line with business process. Manufacturing Feasibility issues to be presented and agreed cross functionally and the product style and design influenced to support Manufacturing targets & functional deliverables. Key Deliverables 1. Analysis of final assembly feasibility on future programmes: 1. Review style and design to identify & subsequently resolve manufacturing feasibility concerns and support Manufacturing Functional deliverables i.e. Design For Manufacture best practice, assembly time targets, production quality targets 2. Conduct analysis of part design through virtual and physical studies to provide recommendations, identify issues and support problem resolution. 3. Analyse dimensional management outputs and develop assembly strategies to ensure product quality...

We are recruiting Panel Wirers for a specialist engineering company in Stoke-on-Trent, focused on fitting industrial scanning systems and electrical control panels onto large commercial vehicles and trucks. The role involves installing complex electrical systems and control panels onto vehicle chassis. You'll be working from engineering drawings to wire, fit, and terminate electrical components and cabling for industrial-grade scanning and automation equipment. Key Responsibilities: Electrical installation of scanning systems and control panels on large vehicles Wiring complete systems onto truck and van chassis Fitting of data and comms cabling including RJ45, Cat5/Cat6 General mechanical fitting: marking out, drilling, tapping, bracket fitting Reading and interpreting engineering wiring diagrams and schematics Using hand and power tools for installation tasks Experience with vehicle conversions is beneficial

NRL are recruiting experienced Banksman/Slingers to join a major upcoming pipeline project in the Chester area. This is an excellent opportunity to be part of a high-profile development. Key Responsibilities Safely directing the movement of vehicles, plant, and lifting equipment on site Slinging and signalling in accordance with site plans Ensuring adherence to all site safety protocols and procedures Supporting lifting operations and communicating effectively  Working collaboratively with site teams to maintain efficient workflow Maintaining a clean and safe working environment at all times Requirements Valid CPCS, OPITO or NPORS Slinger/Signaller certification SHEA Gas CSCS Card Proof of right to work in the UK Experience working on pipeline or heavy civil projects (desired but not essential) Strong communication and safety awareness Ability to work as part of a team and follow instructions preciselyHow to Apply If you’re an experienced Banksman/Slinger looking for your next...

NRL are delighted to be chosen to work alongside United Infrastructure Ltd on the Liverpool Bay Carbon Capture Pipeline Project we require EXPERIENCED Civils Foreman with a proven history and interested in work on this long term project Start date: April 2026 onwards -  dependant on clients requirements ONLY Candidates resident in the UK or have the RTW in the UK will be considered Local candidates to site preferred as no allowance for travel/digs on the project if interested please send up to date CV along with any current certificates, front and back of any cards When received we will be in touch to discuss The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future.   We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified...

Up to £52.00 per hour Umbrella or PAYE equivalent About the Role The role will provide an excellent opportunity for a committed person to further develop both their technical and leadership skills in a positive and supportive team environment. You will have a great opportunity for personal growth, alongside developing a network of contacts across the Wing Engineering community, the Plant Production team and its support functions. This role provides support to the Plant Engineering team and Broughton Plant. Tangible Deliverables You will be responsible for leading design investigations and formulating technical solutions for Manufacturing Non-Conformances and Design Investigations ensuring that all Design, Airworthiness and safety requirements are met. Where appropriate you will also liaise with other functions to ensure a fully integrated design solution. You will operate as a lead design engineer and must hold (or have held) design approval signatory in particular...

NRL are currently recruiting General Operatives to support an upcoming pipeline project in the Chester area. This is an excellent opportunity to join a growing team working on a key infrastructure project, with opportunities for ongoing work for reliable and hardworking individuals.   Key Responsibilities: Assisting skilled trades and site supervisors with daily tasks Supporting pipeline installation and maintenance activities Loading and unloading materials and equipment Ensuring the worksite remains clean, safe, and organised Following all health & safety procedures at all timesRequirements: Previous experience in a construction or labouring role preferred Valid CSCS card (essential) Ability to work as part of a team and follow instructions Good level of physical fitness Reliable, punctual, and safety-consciousDesirable (not essential): Experience working on utilities or pipeline projects SHEA Gas Traffic Marshall Abrasive Wheels Confined Space (Low/Medium risk) Small...

Client Rep Site Manager in Chester for a 9 month contract role. Inside IR35 £55-58/h, 10h/day, 5 days a week Primary Objectives * Safety Assurance: To enforce a "Zero Harm" culture in a high-risk environment * Environmental Assurance; To enforce specification requirements relating to waste management, compliance with planning permissions, Station Environmental Permit and Natural Resources Wales restrictions relating to both contamination and ecology. * Asset Protection: To ensure demolition works do not impact adjacent live high pressure gas infrastructure or operational plant areas. * Contract Governance: To validate the contractor's progress, quality of work, and payment applications. * Compliance and effective risk management: Achieve compliance with the Employer's Requirements and report on the Contractor's risk management performance. * Organisation and Leadership of the site team. Key Responsibilities Health, Safety & Environmental (HSE) Oversight * CDM Compliance:...