23 engineering jobs found in Dundee

Aqua-Tech Recruitment are currently seeking two experienced Mechanical / Pipe Fitters to join a project based on a waste water treatment site in Perth. This is a hands-on role involving the installation and fitting of pipework, including working with large diameter (heavy bore) piping systems. Key Responsibilities: * Installation and fitting of pipework systems on-site * Working with heavy bore piping * Reading and interpreting technical drawings and specifications * Ensuring all work is carried out safely and in line with site requirements * Collaborating with other trades and site teams to meet project deadlines Requirements: * Proven experience as a Mechanical Fitter / Pipe Fitter * Valid CSCS or CCNSG card (essential for site access) * Experience working on industrial or water treatment sites preferred * Ability to work from drawings with minimal supervision Desirable (Not Essential): * Confined Space...

Job Title: Deburr Technician (Aerospace) Location: Fife Pay Rate: £12.71 per hour Job Type: 13-week Temp-to-Perm First Achieve Engineering Recruitment is working on behalf of a leading aerospace manufacturer to recruit a Deburr Technician. This is an excellent opportunity to join a well- established company with the potential to secure a permanent position after 13 weeks. Key Responsibilities * Inspecting components for burrs, sharp edges, and surface defects * Operating deburring tools such as hand files, sanders, grinders, and rotary tools * Following blueprints, work instructions, and quality standards to ensure precise finishes * Using microscopes or magnifiers for detailed deburring work when necessary * Maintaining a clean, organised, and safe work area Requirements * Previous experience in deburring, fettling, or metal finishing * Ability to read and interpret technical drawings * Strong attention to detail and quality standards * Good manual dexterity *...

General Labourer / Painter – Immediate Start (1 Week) KBM Resourcing are urgently seeking a General Labourer/Painter to support our Engineering client, at their site in Montrose. This is a great opportunity to gain experience with a well-established engineering business. Wednesday 18th March 1 week What you’ll be doing: • General labouring duties around the workshop • Assisting with painting and basic maintenance tasks • Supporting the engineering team as required What we’re looking for: • Good Health & Safety awareness • Strong work ethic and reliability • Hands-on, proactive attitude What’s in it for you: • £13.68 per hour • Weekly pay • Full-time hours (Monday to Friday, 37.5 hours) • Immediate start with a reputable company • Opportunity to gain valuable site experience If this sounds like something you would like to get involved with, please apply with your up to date cv

Mechanical Fitter - Kirkcaldy - On going work An established client based in Kirkcaldy is looking for Mechanical Fitters for work in and around central Scotland. Machinery Maintenance, Removal and Installation covering Pipework, Tanks, Vessels and Platforms. Travel time paid Regular overtime opportunity Work hours Mon - Thurs 7.30am - 4pm and Fri 7.30am - 12.30pm £24ph Please apply with CV or email INDTEMP

Pipefitter - Kirkcaldy - On going work An established client based in Kirkcaldy is looking for Pipefitters for work in and around central Scotland. Machinery Maintenance, Removal and Installation covering Pipework, Tanks, Vessels and Platforms. Travel time paid Regular overtime opportunity work hours Mon - Thurs 7.30am - 4pm and Fri 7.30am - 12.30pm £24ph Please apply with CV or email INDTEMP

Freelance Site Engineer / Sub Agent – Dunfermline Location: Dunfermline Duration: 6–7 months Contract Scotland is working with a well established contractor to recruit a Freelance Site Engineer to support two active social housing projects in Fife. This role offers a strong mix of technical challenge, autonomy and continuity, with the primary focus being a complex development in Dunfermline. Dunfermline Project A complex retaining wall requiring accurate setting out and technical oversight Civils works, foundations and concrete elements Supporting value engineering due to incomplete design information Helping the site team re‑establish control and drive the project forward Fife Project  Setting out for retaining walls, foundations, civils and concrete works Providing engineering support where design information is incomplete Assisting with value engineering and practical problem‑solving Maintaining accurate site records and QA documentation Supporting the site team...

AI Engineer Outside of IR35 4‑Week Contract £450–£600 DOE Edinburgh Are you an AI Engineer ready to make an impact fast? Join a UK prop- tech leader transforming the lettings industry with smart, data‑driven solutions used by over 1,000 letting agents across the UK. You’ll work on real‑world AI and machine learning projects that enhance our client's platform, improve automation, and help streamline property rental workflows from listing through to lease signing. This short‑term contract is perfect if you thrive in a dynamic environment and want to contribute to cutting‑edge AI features in a fast‑moving SaaS business. What you’ll bring: • Strong experience building and deploying AI/ML models • Hands‑on coding skills (Python or similar) • Ability to integrate AI into product features and data workflows • Curious, collaborative mindset with a focus on delivering results Why this role: • 4‑week high‑impact contract • Opportunity to work on innovative AI projects in prop tech •...

Platers | Edinburgh | ££Excellent + Overtime Avenue require Platers for a contract in Edinburgh, to undertake ship repair and maintenance duties. Requirements: You should be a fully time-served Plater. Extensive experience of plating sheet metal, Previous experience of working in ship yards and on ship repair and maintenance projects. 10 to 12 hours days, 7 days a week available. Overtime during the week paid at time and a half and all hours on the weekend paid at double time, PAYE or CIS Immediate starts, long term work opportunities for the right candidates! Interested? Apply with your most recent CV or Call Alanna on: (phone number removed). INDTEMP

Welder Fabricator – East Lothian Temporary & Permanent Roles | Days & Nights | Competitive Pay A leading engineering company in East Lothian is seeking experienced Welder Fabricators to join their growing team. This role may include occasional site work. Pay & Shifts: * Days: Monday–Friday, 8:00am–4:00pm – £22/hour * Nights: Monday–Friday & Thursday, 8:00pm–6:00am – £28/hour * Overtime: Paid after 39 hours at enhanced rates What You’ll Do: * MIG welding (solid wire & flux core) on mild steel * MIG welding on aluminium * Work across MIG-MAG, MMA & TIG welding processes * Fabrication duties including drilling, grinding, polishing, dressing, and use of band saws Requirements: * Proven experience as a Welder/Fabricator * Experience working with aluminium (6mm up to 25mm thickness) * Relevant qualifications (City & Guilds, BTEC or equivalent) * Welding...

Principal High-Speed Digital Hardware Engineer Certain Advantage is hiring for a Principal Digital Hardware Engineer based in the Edinburgh area. This role is on a contract basis and is hybrid-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across various industries—from aerospace and automotive to healthcare and semiconductors. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Principal Digital Hardware Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Creating high-quality and robust digital electronics designs Documenting and recording deliverables Supporting integration & verification activities at the hardware and system level Keeping designs under configuration control Providing...

Lead Electronics Engineer  Edinburgh, Luton, Bristol, Southampton (2 days from home) circa £84 per hour + overtime Contract position Virtual interview Mon–Fri   Certain Advantage is collaborating with a key client to recruit a Lead Electronics Engineer. You will lead the electronics development of a key sensor project for aircraft. This is a key role in developing, maturing, and delivering a mission-critical, electro-optical system that will be installed onto the aircraft platform.   What will you be doing? Manage and lead a team of Electronics engineers in developing the sensor system’s electronic hardware through the full engineering lifecycle from requirements analysis to customer delivery. Ownership of electronics work packages, agreeing budget and schedule with engineering management, day-to-day planning and execution of the teams’ work, supervising engineers in completion of their tasks, and status reporting to key stakeholders. Lead the electronics architecture...

Senior / Principal FPGA Engineer Edinburgh, Luton, Bristol, Southampton (Hybrid, 2 days from home) circa £88 per hour + overtime Contract position Virtual interview Mon–Fri   Certain Advantage is collaborating with a key client to recruit Senior / Principal FPGA Engineers who will be responsible for the design and development of FPGA designs using VHDL and verifying designs using VHDL or System Verilog.   What will you be doing? Creating innovative and robust VHDL-based designs Documenting and recording deliverables Verifying FPGA designs Ensuring configuration management/keeping designs under revision control Providing progress reports  A couple of things you should know: At least 5 years’ experience of developing FPGA using VHDL or Verilog Experienced with Mentor Graphics FPGA development tools including HDL Designer, ModelSim / Questa and Precision Familiar with Xilinx / Intel (Altera) / Microsemi (Actel) design flows (ISE, Vivado, Quartus) and third-party synthesis...

Example Recruitment Group is currently recruiting on behalf of a national heating contractor operating within the private sector. They require self-employed heating engineers for an ongoing service & repair contract in the Edinburgh area. Contract Details: Location: Edinburgh Work Type: Annual Service Visits (Annual Gas Safety Check), Landlord Gas Safety Records, and central heating repairs. Work Load: 6-8 pre-booked appointments per day Commitment: Minimum of set 3 days per week. Up to 5 days available plus optional weekends and evening call out available at enhanced rates. Contract Length: Ongoing (no end date) Payment terms: Weekly one week in arrears. Rates: * Annual Service Visit (Annual Gas Safety check): £26.65 per appliance * Repairs: £51.25 per completed property (full van stock and parts supplied) * Linked Repair: £38.44 plus Annual Service Visit Rate (if repair required at Annual Gas Safety Check) Optional out-of-hours and weekend work is available at enhanced...

CNC Machine Operator Location: East Lothian We’re seeking a practical and reliable Machine Operator to join a busy workshop team, working with large, industrial CNC machines. Please note: This is not a programming role. The CNC machines are used for cutting, punching, and drilling structural steel, with programs prepared by the in-house detailing team. As the operator, your focus will be on running the machines safely, ensuring the correct material is loaded, and verifying that parts match the engineering drawings and program specifications. If you enjoy hands-on work, collaborating in a busy workshop environment, and working with large-scale equipment, this could be an excellent opportunity. Key Responsibilities * Operate large CNC steel processing machines * Ensure the correct job runs on the correct material * Check measurements and quality as parts are produced * Use overhead cranes and handling equipment safely * Work closely with supervisors...

Assembly Technician - 8 month contract - West Edinburgh. * Easily accessible on ring road, on main bus routes, parking available. Easily commutable from Bathgate, Falkirk, Fife and all areas of Edinburgh. * On site Monday - Thursday 7am - 3.30pm, Friday 7am - 12.30 * Weekday and Weekend overtime paid at a premium rate. * Duties and responsibilities: Assemble or modify electrical or electronic equipment, such as computers, test equipment tel Location: Bankhead, Sighthill area, EH11emetering systems, electric motors, and batteries. Assemble, test, and ship sophisticated radio communication equipment. Basic Requirements Needed: Light Computer skills and ability to read/enter data as required. Ability to read build documentation. Quality/Safety conscious with ability to stay focused Ability to work in a fast-paced team environment. Quick learner with ability to follow verbal and written instructions. Must be used to manual handling. Must be able to work with light...

Welder Fabricator – East Lothian Temporary & Permanent Roles | Days & Nights | Competitive Pay A leading engineering company in East Lothian is seeking experienced Welder Fabricators to join their growing team. This role may include occasional site work. 💰 Pay & Shifts: * Days: Monday–Friday, 8:00am–4:00pm – £22/hour * Nights: Monday–Friday & Thursday, 8:00pm–6:00am – £28/hour * Overtime: Paid after 39 hours at enhanced rates 🔧 What You’ll Do: * MIG welding (solid wire & flux core) on mild steel * MIG welding on aluminium * Work across MIG-MAG, MMA & TIG welding processes * Fabrication duties including drilling, grinding, polishing, dressing, and use of band saws ✅ Requirements: * Proven experience as a Welder/Fabricator * Experience working with aluminium (6mm up to 25mm thickness) * Relevant qualifications (City & Guilds, BTEC or equivalent) * Welding certifications preferred...

Our client a leading global agricultural technology company are looking for an experienced Automation Engineer with strong Emerson DeltaV expertise to support a busy COMAH-regulated site. You’ll join a small in-house team delivering a high volume of system changes, upgrades, and improvements, so the ability to hit the ground running is essential. Key Responsibilities Deliver DeltaV modifications and upgrades Support Management of Change (MOC) processes Troubleshoot and resolve process control issues Translate process requirements into control system code Work closely with engineering, production, and contractorsRequirements Proven hands-on experience with Emerson DeltaV (essential) Experience in COMAH or highly regulated environments Strong problem-solving and fault-finding skills Able to manage multiple changes in a fast-paced settingDesirable Background in Oil & Gas, Chemicals, or Pharma Batch process experienceAdditional Info Fully on-site role 36 hour week Monday to...

Automation Engineer (6-month contract) Are you ready to take your career to the next level? Our client, a leading organisation in the automation industry, is seeking a talented Automation Engineer to join their dynamic team. If you have a passion for control engineering and a knack for problem-solving, this could be the perfect opportunity for you! Role Purpose: As an Automation Engineer, you will provide essential software support for site automation systems. Your expertise will play a vital role in ensuring our operations run smoothly and efficiently. What You Bring: To thrive in this role, you should have: Control Engineering Experience: Proficiency in using Emerson DeltaV is a must. Relevant Engineering Design Experience: Previous experience in a similar role is preferred. Understanding of HSEQ Standards: Familiarity with Health, Safety, Environment, and Quality standards, especially in a Top Tier COMAH site. Knowledge of Chemical Batch Unit Operations: Your experience in...

Mechanical Fitters required for short duration project working on diffusers,Aerators  candidates must have confined space training and be familiar with the use of BA equipment ( training on this will be provided), a basic slinger/ lifting certificate would be an adavntage, this is a short duration 2- 3 week project with fast tunaround People are our business worldwide   Orion Group was founded in 1987 and is now one of the largest, independent, international recruitment companies. We have a network of 200 employees working from 24 offices, delivering a range of services – Talent Acquisition, Recruitment Outsourcing Services, Retained Search, Global Workforce Solutions, Completions & Commissioning and Materials Management – across 68 countries. As a global leader in workforce solutions, we recruit personnel across the Engineering & Technical, Office & Commercial, Scientific and Skilled Trades disciplines, for sectors including Oil & Gas, Life Science, Power &...

Senior Systems Engineer Livingston or Glenrothes (Hybrid – minimum 3 days onsite) – 12 months (Inside IR35) BPSS needed (SC is ideal) Overview An exciting opportunity for an experienced Senior Systems Engineer to join a high-performing Weapons & Sensors engineering team, supporting the delivery of complex programmes for UK-based customers. Reporting to the Senior Programme Manager within the Power Development Team, the role spans the full product lifecycle and involves working within a collaborative, multi-disciplinary environment using modern digital engineering approaches. This position offers strong professional development opportunities within a growing defence-focused engineering environment. Key Responsibilities * Requirements Management: Capture, analyse, and manage system requirements, ensuring they are clearly defined, verifiable, and traceable throughout the lifecycle. * System Design: Develop and optimise system architectures and components, balancing...