450 jobs found in Epsom

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Product Manager - Systems Engineer +6 months + +Hybrid working in Reading +SC cleared role +£83 ph +Inside IR35 We are looking for an experienced Product Manager - Systems Engineer to lead the delivery and evolution of digital engineering capabilities that support the Safety pillar across the enterprise. This role focuses on enabling model-based safety engineering and embedding Safety into the Digital Thread - replacing document-centric approaches with authoritative models that provide end-to-end traceability from safety objectives and requirements through architecture, analysis, verification, and compliance evidence. Key Responsibilities Deliver and continuously improve Safety toolchains (FHA, FMEA/FMECAs, FTA, STPA, safety requirements, safety case tooling, configuration/change control, V&V orchestration) Define Safety reference architectures and technical baselines Ensure full Digital Thread integration and traceability across requirements, models, test, and...

Job title: Systems Engineer (Digital Engineering) Location: Reading/Hybrid (2-3 days per week on site) Rate: £83 per hour inside ir35 Contract: 6 months+ SC security clearance is required for this role Job description: We're looking for a Systems Engineer within Product Delivery for a client of mine who are a leading IT and engineering firm operating within the UK defence sector. You will own and evolve their System of Systems (SoS) digital engineering capability. Responsibilities: Deliver and continuously improve SoS toolchains (Cameo/UAF, SysML/UML, IBM DOORS NG, interface & configuration management, simulation and verification integration). Define the reference architecture and technical baselines for multi-system digital solutions. Create and manage a clear capability roadmap and backlog aligned to enterprise priorities. Enable full digital traceability from capability requirements → architecture → interfaces → analysis → verification → compliance evidence....

Engineering Project Manager 6 Month initial Contract Work Location: Stevenage Overview of department:   The role sits within the Electronics Engineering department. They are growing, dedicated and we work as a team to deliver projects. You will be managing detailed design of electronics products such as printers, small thermostats ect.   Responsibilities: Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy.   Skillset/experience required: Someone with drive, passion and commitment who has: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management...

Technical Support Engineering Advisor -Contract Our successful client is looking for an enthusiastic Technical Support Engineering Advisor to join their friendly, proactive team. What you’ll do as a Technical Support Engineering Advisor: * Handle technical customer calls confidently and clearly. * Read engineering drawings and identify required parts. * Work with Bills of Materials, spares, and place orders. * Support the manufacturing-to-supply process. * Take a proactive approach to problem-solving. What you’ll need as a Technical Support Engineering Advisor: * Some experience in a technical/engineering support role * Knowledge of manufacturing processes * Ability to interpret engineering drawings * Confident communication skills and a willingness to learn * A positive, can-do attitude If this Technical Support Engineering Advisor role sounds like a suitable opportunity for you, please...

Role:               Electrical Systems Engineering consultant Based;            Home based with travel to site as needed - Cambridgeshire PE19 Contract:        12 months+ Rate;              Negotiable Our client is building a team and requires two candidates who will be part of a multi-disciplined team conducting various studies from concept design to feasibility studies. Be responsible for the electrical system studies and design of the generation & distribution infrastructure operation philosophy. Role & Responsibilities: Support sales team with early engagement with customers by understanding and interpreting customer needs and objectives. Be creative, analytical, and flexible in generating designs and solutions and effectively communicating features and limitations of various solutions. Ensure customer needs are understood and met from a FES perspective. Document and share best practices and lessons learnt from projects System Studies and Analysis – performing...

Engineering Manager – Enstone Up to £410 per day (Inside IR35) Monday to Friday (Days) This is a hands-on Engineering Manager role, ideal for someone who enjoys leading from the front. While you’ll be responsible for managing a small team of engineers, you’ll also be expected to remain technically involved — supporting breakdowns, overseeing maintenance activity, and getting on the tools when required.  Key points: Lead a team of engineers Oversee maintenance, reliability, and statutory inspections  Very hands-on role — not office based Day-to-day decision-making on site, providing technical guidance, and stepping in to support complex or urgent engineering issues. Motivating & engaging the teamRequirements: Mechanical or electrical engineering background CI & Lean Engineering Experience  H&S Knowledge  Responsible for maintenance, reliability, and statutory compliance Proven experience managing engineers in manufacturing / FMCG / heavy industry Strong H&S and...

Suspension Engineers Certain Advantage is hiring for a Suspension Engineers based in the Warwickshire area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that blends British craftsmanship with cutting-edge innovation to create luxury vehicles that redefine performance and style. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role. The Role: This role is for a Suspension Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Complex work in the research and development of suspension engineering systemsThe Individual We’re looking for people who can show: Project environment Working knowledge of product creation & delivery, change control, and change management CAD / CAE design and analysis experience, preferably with Dassault...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

Rubicon Consulting is currently recruiting for an Engineering / Manufacturing Technician – Rotating Machinery on 6 month rolling contracts based in Warwickshire. Role Summary We are seeking a skilled and motivated Engineering Technician to support the manufacturing of high-performance rotary power units. This role combines hands-on technical assembly with engineering support responsibilities, ensuring products are built to specification, quality standards, and Lean manufacturing principles. The ideal candidate is mechanically inclined, detail-oriented, and driven by continuous improvement. Key Responsibilities · Read and interpret technical drawings and standardized work instructions. · Build and Assemble rotor components including shafts, laminations, cores, windings, bearings, and housings according to engineering specifications. · Perform gas brazing and induction brazing of copper components, ensuring proper joint integrity, alignment, and quality standards · Perform...

We are looking for an experienced and motivated Engineering Team Leader to join an engineering department in a modern, clean FMCG environment in Tewkesbury. LOCATION: Tewkesbury Industrial Estate PAY: £20.51 + OT of x1.25 above 40 hours HOURS: Week 1: Mon-Sat 06:00-14:00 (6 shifts), Week 2: Mon-Fri 13:45-21:45 (5 shifts) DURATION: Temp to Perm after 12 weeks What You Will Be Doing Support the Engineering Manager in delivering departmental goals Supervise, train and mentor Engineers, utilising team skills effectively Coordinate and deliver planned preventative maintenance schedules Repair and test electrical and mechanical plant equipment Lead effective fault finding and resolution for high-speed automated machinery Assist with departmental paperwork, records and compliance requirements Mentor Apprenticeship candidates as appropriate Deputise for the Engineering Manager and cover for Engineers when required Participate in equipment breakdown call-out rotaWhat You Will Bring...

Power System Studies Engineer 6-12 Month Contract Leatherhead, Surrey Start – ASAP Outside IR35 Working pattern - 4 days in the office, 1 day remotely. We are looking for a Power systems studies engineer to support onshore projects with our client delivering on complex energy, infrastructure and government projects. They offer exposure to major international programmes within a technically strong and collaborative environment. Skills / Experience To include captive power generation, with or without grid connection Studies will include equipment sizing, load flow, short circuit, dynamic motor starting, harmonic studies, arc flash & transient stability Tasks will include running power system studies and overseeing third party vendors Provide power system studies for projects including EMT software. Intermediate know-how using ETAP software Company information At First Recruitment Group we understand just how important it is to secure the right people. That is why our...

E&I Package Manager Surrey (hybrid) circa £70 per hour LTD (Outside IR35) initially 12 months Mon-Fri Advantage Resourcing is partnering with a leading engineering organisation to recruit an E&I Package Manager based in Surrey. You will be responsible for the delivery of major electrical packages for a significant Brownfield / Greenfield facility.   What will you be doing? Be the focal point between the Client and the Business Work with packages which include modifications to the existing power management system, existing 11kV switchgear and for new transformers, as well as other Electrical equipment such as 110kV switchgear, etc. Drive the multi-functional delivery, including integrating with the construction team on ROS dates, build sequence etc and facilitating stakeholder buy-in. Support the engineering disciplines with a broad understanding of the scope.  A couple of things you should know: Solid engineering background to facilitate technical issues...

Job Title: Exam Technician Job Location: Wimbledon Hourly Rate: £25.60 PAYE / £33.36 Umbrella Hours Per Week: 44 Hours Duration: on going Start Date: ASAP Industries Considered: Aviation, Plant, Automotive, Rolling Stock, HGV, PCV, Marine and Armed Forces EX Electrical and Mechanical Engineers Position Summary You will be responsible for carrying out routine maintenance, repair and fault finding on large state of the art, electrical based vehicles. Take overall responsibility of vehicle examinations in line with vehicle maintenance instructions (VMI's). Undertake all types of maintenance examination work to ensure that we provide a safe, reliable, and defect free unit. Take responsibility for the safe, efficient and professional workmanship of oneself and others under your control. Undertake 'Designate Person' safety responsibility for applying Depot Protection System and ensure safe systems of work methods are applied. Key Responsibilities will include: *Undertake...

EFAB Resourcing are looking for a Maintenance Technician for a 6 month contract, based in Wimbledon. The Maintenance Technician will execute planned and unplanned maintenance work to maintain plant reliability and compliance with the client's standards within their training, competence and authority. The technician will work usual hours during the week and be expected to cover breakdown work out of hours or at weekends if needed. MAIN DUTIES 1. Responsible for the completion of all routine and breakdown maintenance of plant and machinery up to level of competence, training and authority. Ensuring that the work is undertaken safely, efficiently and in a cost-effective manner. 2. Inspect and check operating plant and machinery as instructed. Diagnose faults on plant and machinery and complete SAP notifications and work orders for the rectification. 3. Resolving plant problems by rectifying defects, and identifying opportunities that will enhance plant reliability. 4....

ELECTRICIAN £230 DAY RATE EICR`s/REMEDIALS IN SOUTH/ SW LONDON IMMEDIDATE STARTS WEEKLY PAY (MIN 2 TESTS PER DAY) CALL SION AT EXAMPLE ON (phone number removed) DAY RATE PLUS 0.30p per mile and for parking/ congestion charges. CAN ALSO WORK OFF A SOR`s DOING 3-4 TESTS PER DAY. Subcontractor Electrical Testing & Remedial Works Engineer Location: South London/ Southwest London/ West London Contract Type: Subcontractor (Self-Employed) Payment: Per Schedule of Rates (SOR) – Labour only, materials supplied Hours: Monday–Friday, 08:00–17:00 Start: Immediate A well-established electrical services provider is seeking an experienced Electrical Testing & Remedial Works Engineer (Subbie) to deliver high-quality work across South London / Southwest London / West London. Projects primarily include social housing, local authorities, and domestic/commercial properties. Role & Responsibilities Conduct EICRs (Fixed Wiring Testing) and carry out associated remedial works Identify,...

Job Title – Project Engineer (Capital Projects Engineer / CAPEX Project Manager) Location – Remote (Essex, Kent or London) Salary – £60,000 – £72,000 (6 Month Fixed Term Contract) Car Allowance – £5,500 per annum + Mileage Paid Shift – Monday to Friday (Flexible / Project-Based Hours) Job Role – Project Engineer Are you an experienced Project Engineer looking for a high-impact 6-month fixed term contract within a fast-paced manufacturing environment? This Project Engineer role offers the opportunity to lead large-scale CAPEX projects (up to £1M) across multiple UK sites, delivering engineering investment programmes that directly impact operational performance and business growth. As a Project Engineer, you will take full ownership from concept through to commissioning, working with senior stakeholders to deliver projects on time, within budget and to specification. This is a fantastic opportunity for a results-driven Project Engineer who thrives in dynamic manufacturing...

Mechanical Project Manager - South East London 9+ Month Contract | c. £400 per day CIS | Major Commercial Fit-Out (£45M M&E Package) An exciting opportunity has arisen to join one of the industry's most innovative MEPH contractors, delivering a high-profile commercial fit-out project in South East London. You'll take the lead on a £12M mechanical/Ductwork package as part of a £45M M&E delivery. As Mechanical Project Manager, you will: Bring 5+ years' experience in Building Services / Mechanical project management Hold a relevant mechanical / building services qualification Report directly to the Project Director Provide technical leadership as part of an established and highly skilled project team Help drive successful delivery on a prestigious, fast-paced scheme If you're looking to take on a major project with a forward-thinking contractor, this is an excellent long-term contract opportunity. For more information, contact Steve Snelling at Fawkes & Reece...

Multi-Skilled Maintenance Engineer Croydon 2-3 Months 4 on 4 off Umbrella or PAYE Join a leading UK bakery producing iconic bread products enjoyed by families across the nation! We're seeking an experienced Multi-Skilled Maintenance Engineer (electrical or mechanical bias) to support our engineering team. Responsibilities - Multi-Skilled Maintenance Engineer Reactive and planned preventative maintenance on high-speed production and packaging equipment Fault finding and repairs (mechanical, electrical, pneumatics, hydraulics) Supporting continuous improvement initiatives to minimise downtime Ensuring compliance with health & safety and food hygiene standards Working closely with production teams in a fast-paced FMCG environment Experience/Qualifications - Multi-Skilled Maintenance Engineer Proven experience as a Maintenance Engineer in food manufacturing, FMCG or similar (bakery experience advantageous) Multi-skilled with qualifications (e.g. NVQ Level 3, City...