73 jobs found in Hadleigh

Example Recruitment Group are recruiting for a National Heating contractor specialising within the Local Authority sector and they have an amazing opportunity for an OIL/GAS Engineer to work on a permanent basis will call-out & overtime regularly available. You will be given service and repair work and all the appointments are pre-booked with a very high access rate. They are currently recruiting for an OIL/GAS Engineer to join their team in Suffolk and Essex. The Role: * Oil service and repair work within Domestic Housing association properties * All appointments pre-booked * Very high access rate * Working in CO/IP postcodes Requirements: * Qualifications required: Oil and Gas * Full UK Driving Licence * Clean DBS

Welder/Fabricator An established Engineering company based just outside of Sudbury is looking for a Welder/Fabricator to join their team. As the welder/fabricator your duties will include * MIG Welding * Read and interpret drawings * Architectural metalwork * Ability to work independently as well as in a team You must have experience of using MIG welding and experience in metalwork. You will need to have good attention to detail and good timekeeping. Salary: £14 - £15 per hour depedning on experience Working hours: Monday - Friday 07:00 - 16:30 overtime available and paid at an enhanced rate

Senior Design Engineer - Highways   We are recruiting a Senior Design Engineer to lead the delivery of highway improvement, maintenance, and traffic engineering schemes. This is a key role for a highly experienced engineer with responsibility for technical design, team leadership, and project delivery across multiple schemes.   Key Responsibilities ·Lead and co-ordinate multi-disciplinary design teams to deliver highway projects on time, to cost, and to quality standards ·Conduct technical design checks and ensure compliance with internal quality and safety processes ·Manage staff performance, training, and development, including mentoring junior engineers ·Build and maintain strong client relationships, collaborating to define project objectives and deliverables ·Plan and allocate resources effectively, including sub-consultants and external partners ·Ensure legal compliance with Health & Safety and Environmental legislation in design and construction ·Oversee...

Assistant Design Engineer - Highways   We are currently recruiting for an Assistant Design Engineer to support the delivery of highway maintenance, improvement, and traffic engineering schemes within a well-established highways and infrastructure programme. This role offers an excellent opportunity to develop technical design experience across highway maintenance, asset management, and active travel schemes, working closely with engineers, technicians, and key stakeholders.   Key Responsibilities ·Develop highway maintenance schemes from defect identification through to treatment selection and construction documentation ·Assist in the design of highway improvement, traffic engineering, pedestrian, and active travel schemes ·Support the production of forward programmes for highway maintenance works ·Assist in the management and delivery of highway condition inspections and asset surveys ·Update and utilise highway asset management systems ·Produce technical reports,...

A fantastic opportunity has arisen for a Qualified Gas Engineer to join an ever growing company on a sub-contracting basis working with Prestige skills & our clients. Due to the expansion we are giving the right candidates the chance to join our professional and dynamic team. All applicants must be experienced & qualified gas engineers with CCN1/CMA1 and MET1 Qualifications All applicants must have their own van and tools. Skills ·Experience in a similar role ·Must be a team player ·Have a good work ethic ·Fantastic customer service skills About the Role The role will be, working as a metering engineer attending faulty gas meters which would need exchanging, installing or repairing. You will be expected to carry out a number of tasks which include visual inspections of gas appliances, standing and working pressure checks and, alteration of meter locations. The role is fully customer focused, carrying out essential works driven by the HSE. If you would like to be...

What we need: Carrington West are pleased to be working with our client for a Quantity Surveyor, required for long term works in the Highways sector for an established yet growing company based in Ipswich.   As the successful Quantity Surveyor, you will support the Lead QS, monitoring all cost and maximising value across all projects.   Upon joining our clients Ipswich based team you can expect a high degree of autonomy and exceptional standards of professionalism and customer service.   The position requires the successful candidate to be on-site 5 days per week with experience of highways term maintenance and NEC contracts. Our clients can offer a challenging and rewarding role to someone who can demonstrate: - A recognised qualification in Quantity Surveying or related subject. - Good experience and detailed knowledge of working with the NEC suite of contracts. - Strong communication skills and a willingness to go above and beyond client expectations. - The ability to...

M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Apache Mechanics and Avionic Technicians to join our team The role Based in Illesheim, Germany you’ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Apache Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: * You must have minimum 3 years’ experience working on the desired aircraft. * Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. * Broad knowledge of aircraft sheet metal/structural modifications and repair. * Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment,...

Electrical Improver A great opportunity for an electrical improver to work on a commercial warehouse in Stowmarket for 1 month minimum. Work consists; Containment & running data cables. Electricians will require an ECS card in order to get on site. Details; * Start : ASAP * Duration : Minimum 1 month * £180 - £190 per day * Hours : 8:00 - 16:00 * Commercial experience. * Valid ECS card required * PPE required * Hand & Power tools required

Job Title: MIG Welder Location: Ipswich / Woodbridge, Suffolk (Transport Required) Salary: £16 (circa) plus payrise after 3-months! Contract: Permanent subject to a successful 3 month trial (Temp-Perm) Working Hours: 40 hours per week (EARLY FINISH ON FRIDAYS) A engineering firm local to Woodbridge has recently received a surge of orders and is looking for an experienced welder to join immediately. With confirmed projects extending into next year, they require a skilled welder/fabricator capable of working independently from CAD drawings. They are offering a starting salary of £15.50ph with a pay rise after 3-months. Overtime available on-top @ increased rates. This role would suit a fabricator who can purely weld & fabricate bespoke products from drawings independently. You will mostly be MIG welding mild steel, but you may also be required to do the occasional bit of TIG welding; the thicknesses could vary from 2mm-30mm. You will also be expected to read and...

JIB GOLD card Electrician, 18th Edition PTS/Sentinel card ( work on Railway) IPAF would be an advantage. Orange PPE, Own Tools Nights, working on install works on station platforms, 4 weeks work or longer Part of upgrades on Greater Anglia route, more stations to follow on

Contracts Manager  £475-£500 per day INSIDE IR35 via umbrella Hybrid (3 days office based, 2 days WFH) 12 month contract (likely to be extended) Your new company: A major European energy provider specialises in electricity generation, distribution, and related services. The company focuses on low-carbon energy production, including nuclear, renewable sources, and energy efficiency solutions, to support the transition to a sustainable energy future. Role Overview: As a Contract Manager, you will play a pivotal role within the Contract Management Team, collaborating closely with the Contract Lead and PMO Manager. Your primary responsibility will be overseeing major contracts, ensuring optimal performance, and driving commercial excellence. In this role, you will engage with Outage Management, Engineering, Procurement, and Quality Assurance teams to enhance supplier relationships, identify commercial opportunities, and implement service improvements. This is a great...

My client is seeking an experienced Senior Circuit Engineer to take technical ownership of high-voltage electricity distribution networks and play a key role in keeping customers connected safely and reliably. This is a senior, authoritative engineering role with genuine accountability. You'll be trusted to make decisions on live networks, provide technical leadership, and act as a key interface between operations, projects and planning teams. What you'll be doing Acting as technical authority for assigned HV circuits (typically 11kV / 33kV). Planning, approving and supporting complex switching, outages and network reconfigurations. Leading and supporting fault investigation, restoration and root cause analysis. Ensuring full compliance with Electrical Safety Rules, company policies and ENA standards. Providing engineering assurance for reinforcement, refurbishment and new connection schemes. Reviewing designs from internal teams and third-party providers (ICPs/IDNOs). Mentoring...

Job Title: Assembly Technician Location: Bury St Edmunds Hours: Monday - Thursday, 6:30am - 4:00pm (4-day working week) Are you a hands-on, reliable individual with strong mechanical skills? We are currently recruiting for a Assembly Technician to join a well-established and growing engineering manufacturer. This is an excellent opportunity to secure a long-term role with a company that values quality, safety, and teamwork. The Role As a Assembly Technician, you will be responsible for assembling, testing, and inspecting valves in line with engineering specifications and quality standards. You will play a key role in ensuring products meet required performance and safety criteria before dispatch. Key Responsibilities Assemble valve components accurately using hand tools, fixtures, and engineering drawings Carry out pressure, functional, and leak testing as required Inspect components and completed valves to ensure they meet quality standards Accurately record build and...

Job Specification – Welder / Fabricator Location: Braintree, Essex Pay: £16.00 – £18.00 per hour (depending on experience) Contract Type: Permanent (subject to a 3-month probation period) Working Hours: Monday – Friday, 7:30am – 4:00pm About the Role: A well-established manufacturing company in Braintree is seeking a skilled Welder / Fabricator to join their growing team. This is a hands-on, full-time position offering long-term stability, excellent pay, and great company benefits. You’ll be working in a structural and architectural fabrication environment, contributing to high-quality projects across a range of sectors. Key Responsibilities: * MIG welding of mild steel components (3mm – 40mm thickness) * Interpreting and working from technical engineering drawings * Operating fabrication machinery and equipment * Working to execution class 2 welding standards * Fabricating bespoke and structural components to specification *...

At Prime Appointments, we're proud to be working with a respected and growing sub-contract engineering firm based in Witham, Essex, who are looking to expand their team with an experienced Welder Fabricator. If you're confident in both MIG and TIG welding and want to be part of a busy workshop with exciting custom projects, this could be the ideal opportunity. Why Apply? Competitive hourly rate - up to £20ph, based on experience Overtime paid at 1.5x - regularly available Permanent position - join a stable, well-established company Diverse projects - including bespoke fabrications for big-name clients in the FMCG sector Free on-site parking Opportunities for training and skill development The Role: You'll join a skilled fabrication team working on a wide range of custom projects. Your work will include: MIG and TIG welding on stainless steel, mild steel, and aluminium Fabricating platforms, staircases, frames, guards, trolleys, and more Using workshop machinery - press...

Welder/Fabricator – Temp to Perm Opportunity 📍 Location: Witham 🏭 Industry: Automotive Equipment Manufacturing 🕒 Hours: Monday – Friday, 07:00 – 15:00 🚀 Immediate Start Available Stonetech Recruitment is seeking an experienced Welder/Fabricator to join a leading automotive equipment manufacturer in Witham. This is a temporary-to-permanent opportunity for a skilled professional looking for long-term stability. Key Responsibilities: 🔧 MIG Welding to high standards 🏗️ Fabricating components with precision 📐 Reading and working from technical drawings What We’re Looking For: ✅ Proven experience in MIG welding & fabrication ✅ Strong attention to detail and quality control ✅ Ability to interpret and follow technical drawings 📢 Don’t miss this opportunity! Apply now for an immediate start

Do you have previous experience as a Machine Technician? Do you have an interest in Machine Wiring with some proven experience? Job Title: Machine Assembler Location: Haverhill, Suffolk Hours: Monday - Thursday 8.00am to 4.30pm / Friday 8.00am to 3.30pm Salary: £12.21 p/h to start, increasing to £13 once trained Contract Type: Full time, 12 week temp to perm Our client based in Haverhill, Suffolk is seeking a Machine Assembler As Machine assembler your duties will include: * Perform electrical testing of system builds * Read and work to engineering drawings and schematics * Ensure production schedules are met in line with customer demands An ideal candidate for the Machine assembler will have: * Electrical experience, including panel assembly and wiring from diagrams * Experience in building switchgear is desirable Ideally you will have experience within a similar position. Interviews will take place in Haverhill, Suffolk following a registration process by PureKat...

MIG Welder Location: Thetford Salary: Up to £16.00 per hour (depending on experience) Stonetech Recruitment is working with a well-established and respected manufacturer based in Thetford, is currently looking for an experienced MIG Welder to join their growing team. Key Responsibilities: * MIG welding of mild steel components to a high standard * Working from engineering drawings * Assisting in the fabrication and assembly of bespoke vehicle bodies and equipment * Maintaining a clean and safe working environment Requirements: * Proven MIG welding experience * Ability to read and interpret technical drawings * Good attention to detail * Team player with a strong work ethic What’s on Offer: * Competitive hourly rate up to £16.00, depending on experience * Ongoing, full-time work with long-term potential * Supportive team environment If you’re a skilled welder looking to join a reputable company with strong...

Role – Mechanical Fitter Location – Thetford, Norfolk Working Hours – Monday to Friday – 07:30 to 16:30 Pay Rate – Up to £16 per hour Capacity of role – Temporary to Permanent role Our client who is based in Thetford is currently recruiting for a Mechanical Fitter to join their busy workshop team. Candidates will need previous Mechanical skills and have worked in an Engineering based position. Overtime will be offered as and when the business requires. Main duties will include – * Responsible for build of sub – assemblies, * Using hand tools and employing fitting skills, * Build of full machine assemblies, * Testing and inspecting components, * Setting and operating manual shop machinery, * Ideally have a mechanics background

Please note this role is a 12 month FTC with future possibility of permanent employment. Hybrid working available: Minimum 2 days onsite per week We are seeking an Antenna Design Engineer to join a collaborative engineering team delivering innovative antenna and RF solutions. You will be involved across the full product development lifecycle, from early bid support and requirements capture, through concept and simulation, to prototyping, verification, and production handover. This is a hands-on role offering exposure to design, simulation, testing, and manufacturing within a supportive team environment. Key Responsibilities * Design and develop antenna and RF products * Support new product development from concept through to production * Perform requirements analysis and contribute to system-level design * Conduct RF testing, validation, and optimisation * Maintain and improve RF test facilities * Produce technical documentation and design reports *...