228 jobs found in Harlow

Engineering Project Manager 6 Month initial Contract Work Location: Stevenage Overview of department:   The role sits within the Electronics Engineering department. They are growing, dedicated and we work as a team to deliver projects. You will be managing detailed design of electronics products such as printers, small thermostats ect.   Responsibilities: Your role as a Senior Engineering Project Manager (SEPM) is to deliver our most complex and priority projects to time, cost and quality; to drive the design, development and delivery of our highly complex electronic sub-systems, from concept through into full production. This is a fantastic opportunity to be a senior member of the project management team; someone who will contribute to our delivery strategy.   Skillset/experience required: Someone with drive, passion and commitment who has: Experience of Project Management best practice: Risk Management, Stakeholder Management, Compliance Management, Configuration Management...

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Role:               Electrical Systems Engineering consultant Based;            Eaton Socon, Cambridgeshire PE19 Contract:        12 months+ Rate;              Negotiable Our client is building a team and requires two candidates who will be part of a multi-disciplined team conducting various studies from concept design to feasibility studies. Be responsible for the electrical system studies and design of the generation & distribution infrastructure operation philosophy. Role & Responsibilities: Support sales team with early engagement with customers by understanding and interpreting customer needs and objectives. Be creative, analytical, and flexible in generating designs and solutions and effectively communicating features and limitations of various solutions. Ensure customer needs are understood and met from a FES perspective. Document and share best practices and lessons learnt from projects System Studies and Analysis – performing detailed power system studies...

Business Change & Communications Professionals (x2) Contract: Rolling 6 months Location: hybrid - Milton Keynes 3 days a week Hours: Full-time Note: They need to get the balance more on experienced change managers, who can also do comms, including being super proficient in SharePoint. You need to have Network Rail expereince for this role Overview: We are seeking two proactive and delivery-focused Business Change & Communications professionals to support a fast-paced programme environment. These roles are hands-on and execution-driven, ideal for individuals who thrive on making things happen and can operate across multiple workstreams with minimal supervision. Key Responsibilities: * Deliver change and communications activities across multiple projects and workstreams. * Build, maintain, and manage SharePoint sites to support programme visibility and engagement. * Create and distribute engaging communications materials tailored to diverse stakeholder groups. *...

Change Manager - Contract Role (Milton Keynes, Hybrid) Overview We are seeking an experienced Change Manager for a contract position based in Milton Keynes (hybrid working). This role sits within a high-profile national programme and requires a candidate with significant experience in rail and engineering environments, ideally with direct exposure to Network Rail (NR) operations, standards, and organisational structures. You will be embedded within a Change Team that works closely with large-scale engineering and maintenance functions across the network, engaging daily with heavy engineering and frontline maintenance colleagues. This industry-specific experience is essential. Key Requirements Rail and engineering background is mandatory. Relevant Network Rail (NR) experience or experience within comparable rail infrastructure organisations. Ability to operate confidently within large national engineering, maintenance, and operational teams. High proficiency in SharePoint...

Our client, a Defence and Security supplier is looking for a Senior Electronics Engineer to join them on a contract basis at their site in Harlow. Due to the nature of the role, applicants must hold the British nationality and be eligible for SC Clearance. Full time onsite in Harlow, Essex. Inside IR35, competitive market rates. 12-month contract. Responsibilities The successful applicant will support the Team across various programmes and will involve the following main duties within the product development: Develop requirements to ensure compliance to the relevant standards. Create and manage architectures for Digital Electronics and firmware (mainly FPGAs) Understand, decompose and verify Design requirements Create FPGA design using VHDL and embedded C Define and perform unit level and sub system level testing for embedded firmware Create design documents (HW +Firmware) Create Test Documents Create Firmware Simulation Test Reports Create Timing and Power Analysis Reports...

Senior Electronics Engineer Harlow, on site full time 12-month contract – Inside IR35 SC needed (ideal but can start on BPSS) The role Our client is looking for an experienced and high performing contract Electronics Engineer to join a successful Assured Position, Navigation and Timing (APNT) team within the Global Sensors Mission Area, creating Digital GPS Anti-Jam Systems for the military market. Skills and experience * Experience creating top level Design architectures * Experience testing and verifying requirements * Experience in working with DSP, Micro, Memory devices, ADCs, DACs, Power supply * Experience working with FPGAs and SoC technologies * Ability to understand VHDL code * Able to present technical information clearly and concisely to others * An openness to learn and try new techniques * Ability to adapt to a dynamic work environment - working independently or with others to overcome obstacles * Capable of analysing and reporting on...

Assembly Technician, Ware, Stanstead Abbotts up to £17p/hr doe (Inside IR35 contract) Hours - Monday-Thursday 8-5. Fridays 8-2.30 (but could change in 2026) contract until 22/5/26 Responsible for assembling parts and components to build mechanical or electrical products. Read and interpret engineering drawings, assemble parts and components accurately, test the assembled components and report any faults. Ensure that the products meet quality and safety standards. This role also involves testing, inspecting, troubleshooting, and repairing any issues that may arise. The successful Assembly Technician must be able to work safely and efficiently with hand tools, power tools, machinery, and other equipment. They must also possess excellent communication and problem-solving skills. Duties and responsibilities Assemble components in accordance with technical drawings. Test completed assemblies for correct operation. Perform basic maintenance on machinery and equipment. Identify and...

HGV Class 2 Driver Are you looking for a stable, rewarding career with an expanding highways and drainage contractor? Vector is excited to represent our client, who is seeking HGV Class 2 Drivers and HGV Drainage Engineers, to join their team in near Cheshunt. About the Company Our client takes pride in creating a supportive work culture, with thorough training, a strong focus on safety, and excellent development opportunities. Join a business that values its team and offers reliable, year-round work in the highways drainage sector, unaffected by seasonal downturns. The Role: HGV Class 2 Driver / Drainage Engineer Starting on a temporary contract, this role has the potential to become permanent. Responsibilities   Drive and operate various HGV Class 2 drainage vehicles, including Vacuum Tankers, Liquid Waste Tankers and Combi Units. Work closely with a skilled operative to assist in the operation of machinery for the clearance and maintenance of surface water and...

Maintenance Engineer – Electrical Stevenage 12 Month Initial Contract £40 per hour Umbrella Working with a Globally known Manufacturing Company within the Defence industry. They are actively seeking a Maintenance Engineer on a 12 month plus contract within the Stevenage area.  Role responsibilities An opportunity has arisen for a Maintenance Engineer to join the Calibration & Maintenance Team. The main aspects of the role are supporting operations team’s activities day to day and conducting repairs on process equipment and environmental stress screening facilities using drawings, circuit diagrams, schematics, user manuals, etc. You will need to have a good understanding of planned preventative maintenance (PPM). No day is the same and the work is extremely varied, interesting and challenging. Skillset/experience required: Minimum qualification: HNC in relevant engineering subject. Electrical Maintenance Fault finding down to component level required. Planned...

Electrical Improver We are looking to recruit an Electrical Improver to work on a temporary basis in the Enfield area joining a team of engineers dealing with PPMs for approximately 3 months. Working Hours: M-F, 8-5 Pay: £19.23 via Umbrella Requirements: Level 1 or Level 2 Qualifications Working all Around Enfield (Van will be supplied) 2 to 3 years’ experience working towards becoming fully qualified 18th edition Clean licence preferred If you are available immediately and looking to gain more experience in the Electrical Maintenance field, please do not hesitate to click Apply

MPI have a requirement for a Part 145 Planning Engineer for our client based at Stansted Airport. This is a contract role for 6 months with a possible extension, working 8.00am to 16.30pm Monday to Friday. You will be accountable for production of accurate maintenance work packages and the management of complex maintenance and modification projects. Rate of pay is to be discussed on application and is out of scope of IR35. Role Requirements:- · Demonstrable experience of project management within an engineering environment. · Have a vast amount of experience in aviation maintenance, operations, CAMO or manufacturing. · Strong PC user skills (Excel, Word, MS Project) · Demonstrate good presentation and interpersonal skills. · Show a good sense of priorities. · Experienced in the usage of Wings ERP or equivalent. · Time flexibility. Interested? For more information, please get in touch

Job description: DCS Recruitment currently seek a cabling engineer who holds a valid ECS card to assist on a project in Enfield on Tuesday 2nd December on behalf of a client. Vacancies: 1 Date: Tues 2/12/2025 Duration: 1 day 8 hour day shift Location: EN3 postcode area of Enfield Requirements: Recent experience working within data cabling and network infrastructure projects in any capacity. Valid ECS card Proof of right to work ID PPE (personal protective equipment) E.G. hard hat, hi vis, safety bootsCall Melanie at DCS Recruitment if interested and available on (phone number removed) (option 2) or apply online for a call back. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Principal FPGA Design Engineer North London Rate up to £75 per hour An established engineering organisation within the defence and advanced technology sector is seeking a Principal FPGA Design Engineer to support a key programme on a long-term contract basis. The client will remain anonymous at this stage due to project sensitivity. This role is responsible for translating high-level system requirements into robust, implementable FPGA architectures and delivering complete FPGA solutions from specification through to verified operation on target hardware. You will also provide technical leadership and mentoring within the FPGA design function. Key Responsibilities: Define and decompose system level requirements into FPGA architectures and detailed designs. Design, implement and debug VHDL-based FPGA solutions. Develop test benches and test vectors to verify FPGA functionality. Produce clear technical documentation including requirements, test specifications and functional...

Our client, a prominent player in the Defence & Security sector, is seeking a Principal FPGA Engineer on a contract basis. This dynamic role involves leading FPGA developments from preliminary specifications to verified design running on target hardware. The Principal FPGA Design Engineer is tasked with providing expert knowledge in electronic design, testing, and certification of systems based around advanced FPGAs while coaching and guiding other Design Engineers. Key Responsibilities: Utilising good engineering practice to produce Firmware for innovative and profitable products and solutions. Supporting and enhancing existing Firmware as per business and commercial needs. Defining requirements, designing, documenting, implementing, testing, and verifying solutions. Designing, implementing, and debugging VHDL based FPGA hardware. Developing test benches and vectors to verify VHDL based FPGA. Writing technical documentation including requirements specifications, test...

About this Position: This role is for a Principal FPGA Design Engineer working on complex electronic systems in the UK. The position serves as the technical lead for FPGA architecture, implementation and verification, ensuring designs meet system requirements while supporting and guiding the wider engineering team. Job Responsibilities: * Define FPGA architectures from high-level system requirements. * Lead VHDL design, verification and hardware integration. * Produce test benches, verification evidence and technical documentation. * Manage work packages and support firmware release processes. * Liaise with internal and external technical stakeholders. * Validate hardware using standard lab equipment. * Contribute to design reviews and mentor junior engineers. Experience Required: * Strong background in FPGA design for complex systems. * Skilled in VHDL development, verification and debug. *...

Job: Principal FPGA Design Engineer Type: Contract Location: Enfield Rate: DOE Role Overview The Principal FPGA Design Engineer is responsible for translating high level system or product requirements into a robust and implementable FPGA architecture. This position covers the full development lifecycle, from initial specification through to verified operation on target hardware. The role also includes providing technical leadership, mentoring colleagues, and contributing to wider product definition activities. Key Responsibilities FPGA Architecture and Development * Interpret and decompose top level system requirements into FPGA architectures suitable for implementation. * Design, implement and debug VHDL based FPGA solutions. * Develop test benches and verification vectors to validate FPGA functionality. * Produce and maintain technical documentation including requirements, functional descriptions and test specifications. * Build...

Job Title: Office Admin Location: Stansted Employment Type: 1 Year Contract Shifts: Monday – Friday 8.30 – 5 PM Benefits: 25 days annual leave plus bank holidays Salary Exchange Pension Scheme Employee Assistance Programme Life Assurance Employee Cash Plan Enhanced Maternity and Paternity Schemes Professional Growth and Development State-of-the-art Equipment and Technology About the Role Reporting directly to the CEO, the role will be responsible for the daily administrative duties, to ensure a safe, efficient, and enjoyable customer experience to all. Assisting in the lounge when operationally required, the role is offered on a fixed term basis Key Responsibilities * Keep staff fully informed of changes in working practices and Operational procedures. * Carrying out Return to Work Interviews in line with Company Absence Management Policy. * Adopting a flexible approach to working hours providing assist in the lounge when required. * Ensure that the...

Meter Operative - Smart Metering (North & Midlands) Salary: £39,000-£41,000 + £3,000 annual bonus Hours: Mon-Fri, 8:00am-5:00pm (30 min lunch) Locations: Carlisle, Hull, Lancaster, Manchester, Sheffield, Doncaster, Nottingham, Lincoln, Edinburgh, Blackpool, Inverness Role: We?re looking for Meter Operatives to join a leading smart metering contract across the North & Midlands. Depending on the location, you?ll install and maintain Single Fuel (electric-only) or Dual Three (dual-fuel, including gas and three-phase electricity) meters. You?ll travel to domestic properties, carry out safety checks, install or exchange meters, test equipment, and record work accurately. Requirements: Eligible to work in the UK Relevant qualifications: EMI for Single Fuel, Gas Safe + dual-fuel accreditation for Dual Three Previous experience in meter installation or similar field work Reliable, punctual, and customer-focused Full UK driving license Benefits: Company-provided van,...

Job title: Test & Repairs Technician Job type: Temporary to Permanent Location: Stevenage Working hours: Mon-Thurs 7am-5pm & Fri 7am-2pm Hourly rate: £14.00 per hour   Our highly established client based in Stevenage are currently looking for a Test & Repairs Technician to join their team on a Temporary to Permanent basis, with a view of an immediate start after interview process. The successful candidate must have hands on and technical skills, with a strong background and understanding of the electronics industry.    Main duties as a Test & Repairs Technician: Technical: - Provide a high standard of technical advice and guidance to customer issues via email & telephone - Oversee technical maintenance and assist with repair operations to ensure that service delivery is not compromised - Undertake investigations and provide reports in relation to customer issues and feedback - Review technical information, manuals and processes, updating &...