193 jobs found in Holmes Chapel

Instrument Pipefitters required for approximately 3 months work. at Lostock Rates as below Normal: 26 OT 1: 32.50 OT2: 39 45 hours a week (overtime after 39 hrs) – possible weekends Lodge payable if needed

STRUCTURAL WELDERS WANTED - IMMEDIATE STARTS 🔥 💥 Excellent Rates | Overtime Available | Long-Term work 💥 🔧 THE ROLE ✅ Welding heavy Plate Steel using MIG ✅ Fabrication Shop Environment 👨‍🏭 WHAT WE NEED ✔️ Time-Served MIG Welder ✔️ Strong Structural Steel Experience ✔️ Confident MIG Welding Thick Plate 💰 PAY RATES 🔹 £19.85/hr CIS 🔥 Overtime rate - £27.03/hr CIS 🕒 HOURS 📅 Monday - Thursday: 7:45am - 4:45pm 📅 Friday: 7:45am - 12:45pm 📞 Apply today to secure your weld test and start immediately

Ambitek is recruiting for Skilled Structural MIG Welders to join our client's team in Winsford. This is a fantastic opportunity for experienced professionals looking for long-term work. Key Responsibilities: ✅ MIG welding of structural beams and end-plates ✅ Perform solid wire MIG welding in the down-hand position ✅ Complete a 10mm T-joint multi-run fillet weld to a high standard ✅ Ensure all welds meet the required quality and safety standards Requirements: ✔️ Proven experience in structural MIG welding ✔️ Ability to perform a 10mm T-joint multi-run fillet weld ✔️ Ability to pass a trades test before starting 📌 CIS or Umbrella only 💰 Rate: £19.85/hour (basic) | £27.03/hour (overtime after 39 hours) 🕒 Hours: * Mon – Thurs: 07:45 AM – 16:45 PM * Fri: 07:45 AM – 12:45 PM ⚠️ Local candidates only – Accommodation is not provided 🚀 Immediate starts available upon successful completion of the trade test. Apply now

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

Electricians Needed | 2-3 Months Work | Immediate Starts Available. Shorterm Group are looking for Electricians to start on The Energy From Waste Plant in Northwich. The duration is likely to be 2-3 months and minimum 45 hrs per week with the potential for more (Weekends). Immediate starts. The rates for this role will be as follows based on a CIS basis. Mon-Fri(1st 39hrs) £26.00 Mon-Fri(over 39hrs) £32.50 Sat(1st 4hrs) £32.50 Sat(over 4hrs) £39.00 Sun(all hrs) £39.00 There is also Night Shifts available on this site (£35.10 All hrs) JIB card/proof of trade required and ideally experience within an industrial environment would be great

Ambitek is currently recruiting an experienced Fabricator/Welder for a long-term position with our client based in Northwich. This role is primarily workshop-based, with occasional site work as required, offering a stable opportunity with consistent hours. Working Hours * Monday to Thursday: 7:00am – 4:00pm * Friday: 7:00am – 1:00pm Key Requirements To be considered, you must have: * Proven fabrication experience * Competency in ARC (Stick) welding * Competency in MIG welding * Experience with vertical stick welding (essential) * A valid CSCS or CCNSG or EMSS What's on Offer * Long-term, ongoing work * Predominantly workshop-based role with occasional site work * Stable working hours with an early finish on Fridays Please note: This role is suitable for local candidates only. Accommodation or digs are not provided. If you're a skilled Fabricator/Welder looking for a secure long-term opportunity in the Northwich area, we'd love to hear from you....

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £16.87 PAYE / £21.83 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing,...

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange...

Coachbuilders Ford & Stanley Talent Services are proud to be supporting our client in the recruitment of Coachbuilders to join their Production team. This is a fantastic opportunity to join a leading UK manufacturer, producing high-quality vehicle bodies. If you take pride in craftsmanship, enjoy hands-on work, and want to be part of a team that delivers industry-leading products, we'd love to hear from you. Salary  £39-42k per annum depending on experience Working Hours Days Monday – Thursday: 7:30am – 4:30pm Friday: 7:30am – 3:30pm The Role As a Coachbuilder and mechanical fitter, you'll be responsible for building and assembling vehicle bodies to the highest quality standards. Working from technical drawings, you'll use a range of materials. Key Responsibilities Build and assemble vehicle bodies from technical drawings. Carry out drilling, cutting, riveting, grinding, and assembly tasks. Meet production and quality targets for mechanical fitting work. Work safely and...

Lead Electrical Engineer – Nuclear Sector (HV Substation Project) Location: Manchester / Remote Work Pattern: Hybrid (2–3 days in the office, typically Tuesday–Thursday; flexible working can be discussed) Sector: Nuclear Project: HV Substation Project / Small Power & Lighting Contract: About the Role We are seeking an experienced Lead Electrical Engineer to support a major HV Substation Project within the nuclear sector. Reporting to the Project Engineering Manager and/or Electrical Engineering Manager, you will take ownership of the electrical engineering scope, ensuring high‑quality delivery, compliance, and technical excellence across all project stages. This is a purely electrical role, requiring recent, hands‑on detailed design experience and the ability to obtain security clearance. Key Responsibilities You will lead the electrical discipline and may be responsible for: Overall delivery of the electrical scope, including schedule development, MDR creation, change...

Kinetic are recruiting a Process Operative on behalf of a highly reputable chemical manufacturer based in Wythenshawe. This is an excellent opportunity to join a well-established company with nearly 100 years of industry expertise, specialising in plastic and adhesive products. Please note: This role is within a chemical manufacturing environment. We are specifically seeking candidates with relevant manufacturing/chemical experience Key Responsibilities * Operating within a chemical manufacturing environment, adhering to strict safety procedures * Safely moving raw materials and finished goods * Loading and unloading vehicles * Supporting production * Carrying out general housekeeping and maintaining high safety standards * Manual handling and heavy lifting duties Requirements * Valid FLT Counterbalance licence would be an advantage * Experience in a chemical or process environment * Strong awareness of health & safety procedures * Good communication skills (written and...

Nelson Permanent Placements are currently recruiting for a Pipefitter to join our client who are a market-leading Engineering Contractor working on-site at a Pharmaceutical Facility in Leek (Staffordshire) They require Pipefitter with strong Industrial, Food & Bevergae Petrochemical and Pharmaceutical to fit Stainless Steel Pipework onsite.. Minimum of 10hr a day Please note - You must have an in-date CSCS Card. A CCNSG Card won’t be accepted. Pipefitter/Welder Requirements: * A Valid CSCS Card. * 2-3 years’ experience as a Pipefitte within Food & Bev, Pharma or Petrochemical settings * Proven knowledge in Sch Stainless Steel Welding and Screwed Pipework. * You must have your own gear, hand tools PPE, overalls and tools. How to Apply: Please send your CV to the email address detailed below. Should you wish to discuss other opportunities in your area, you are welcome to contact our friendly recruitment team. This vacancy is being advertised on behalf of...

On behalf of a very well-established client in Stoke on Trent, we are seeking an experienced Industrial Electrician on a temporary basis. The company manufacture high technology equipment for a variety of industries and are looking for a candidate who is competent to carry out remedial electrical work on fixed electrical installations. Duties * Carry out EICR remedial works, including C2, C3 and FI observations * Replace and upgrade distribution boards * Carry out industrial fault-finding, repairs, inspection and testing * Test, commission and certify completed work in accordance with BS 7671 * Support ongoing electrical maintenance and breakdowns across the site Ideally, you will hold the 18th Edition qualification and an inspection and testing qualification, such as City & Guilds 2391 or equivalent. Initially on a short term temporary basis, the role could continue due to increase in work load. Premier Placement Services are acting as an employment...

2* Site Plater Welder Tuesday 11th August for 12 days straight with 12-hour shift Stoke £21.00 per hour (£31.00 per hour for Saturday & Sunday) plus £7.00 per hour accommodation allowance or £25.00 cash per day for local hire Ion Tec Recruitment are looking to secure the services of 2 Plater Welders to join a 12-day shut down project located at COBALT Energy from Waste at Stoke on Trent This project will see you working with a well-established sub-contractor at a COBALT Energy from Waste facility. This position requires an in-date CSCS Card or Safety Passport & Confined Space ticket. The position will be paid through CIS or Limited Company. The Position * Position: Site Plater Welder * Location: Stoke on Trent * Contract Term: Tuesday 11th August to Saturday 22nd August * Tickets required: CSCS & Level 3 Welding/Fabrication Operational Hours * 06:00 to 18:00 – Monday to Friday at £21.00 per hour * 06:00 to 18:00 – Saturday & Sunday at...

Are you looking for Contract CNC Machinist roles? Immediate Starts. We are currently recruiting for one of the UK's largest Defence Organisations and require CNC Turner Setter Operator. You will be required to set and operate CNC Machines including: Reading and comprehending engineering drawings to ensure machined parts Measuring, examining, and visually inspecting components to detect defects and ensure conformance to specifications, using precision instruments such as micrometres and verniers according to drawing specifications. Comprehensive training provided! These are ongoing contract positions. Monday to Thursday: 7:00am - 3:30pm Friday: 7:00am - 12:00 noon Umbrella Pay Rates - Subject to a pending payrise Standard Hours (37 hours): £26.07 per hour First 2 hours overtime (Monday-Friday): £31.54 per hour Overtime after the first 2 hours each day & all day Saturday: £35.50 per hour Sundays & Bank Holidays: £47.33 per hour For More info please call Neil...

We have a fantastic opportunity for an experienced Senior CS&A Engineer to join a major nuclear infrastructure programme supporting the refurbishment of a critical facility on the Sellafield site. Working alongside an experienced engineering team, you'll support the delivery of civil and structural engineering solutions across the design, construction and commissioning phases of this high-profile project. This role can be done remotely with 1 day a week from Warrington or Cumbria. This position would suit a Civil or Structural Engineer with previous nuclear experience who enjoys technically challenging projects within highly regulated environments. It will appeal to someone who is comfortable producing engineering designs, calculations and technical documentation while supporting project delivery across multidisciplinary teams. Key Responsibilities * Produce civil and structural engineering designs, calculations and technical reports * Support project delivery throughout...

We have a fantastic opportunity for an experienced Principal CS&A Engineer to join a major nuclear infrastructure programme supporting the refurbishment of a critical facility on the Sellafield site. This role will lead the delivery of civil and structural engineering activities, providing technical leadership and ensuring engineering solutions are delivered safely, compliantly and to the highest quality standards. This position would suit a Principal Civil or Structural Engineer with extensive nuclear experience who enjoys leading complex engineering projects. It will appeal to someone who is confident providing technical assurance, mentoring engineering teams and driving engineering excellence throughout the full project lifecycle. Key Responsibilities * Lead civil and structural engineering delivery across major nuclear project work packages * Provide technical leadership, design assurance and engineering governance throughout the project lifecycle * Coordinate...

Are you an experienced FEED Area Engineering Manager with a proven track record in leading multidisciplinary engineering teams within nuclear or similarly regulated industries? Do you possess extensive expertise in delivering Front End Engineering Design (FEED) phases, developing technical solutions from initial concept through to Gate 2, and managing project scope, risk, and stakeholder engagement effectively? If you thrive on challenging projects that require innovative engineering leadership and strategic collaboration, this opportunity offers a unique chance to influence major programmes at a large, progressive organisation committed to safety, excellence, and innovation. Read on or apply now to discover how you can be part of a dynamic team delivering high-impact nuclear projects. The Opportunity Our client is driven by a clear vision of safety, sustainability, and operational excellence. They cultivate a culture that fosters innovation, accountability, and continuous...

Principal CS&A Engineer Location: Warrington 2/3 days per week in office Contract: 12 months Rate: £65 per hour, Inside IR35 Are you an experienced Principal Civil, Structural and Architectural Engineer looking to play a key role on a major nuclear project? This is an excellent opportunity to support the delivery of complex civil, structural and architectural design work within a highly regulated environment. You will work alongside a skilled multidisciplinary team, providing technical leadership while helping to deliver safe, compliant and high-quality engineering solutions. Your responsibilities will include: ·Producing and reviewing calculations, drawings, assessments, specifications and technical reports ·Delivering civil and structural designs for steel, concrete and masonry structures ·Ensuring designs comply with current codes, standards and CDM requirements ·Providing technical leadership, coaching and mentoring to junior team members ·Working independently...