28 education jobs found in Leeds

Manufacturing Engineer 12 Month Contract Based in Bolton Offering £35ph Inside IR35 Are you an experienced Manufacturing Engineer? Do you hold an Apprenticeship and NVQ/SVQ Level 3? Are you experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Compilation and update of Manufacturing Instructions. Design, Commissioning, and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework...

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product...

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton is currently looking to recruit a Night Shift Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £39.50ph   Night Shift Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base...

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

Multiple Temporary Mechanical Fitter positions available with a growing Engineering organization based in Wakefield. Offering hourly rates up to £18.00, guaranteed overtime paid at 150%, 30-minute flexibility on start & finish times and the chance to work on bespoke, state-of-the-art projects. Established over 120 years ago, this impressive Engineering organization has diversified and is now a major supplier to a number of high-profile businesses operating in a variety of industries, including Chemical, FMCG and Steel Processing. In the past 2 years, this employer has made significant investment and now operates out of a brand new, purpose-built 75,000 sq ft facility, from which they provide end-to-end services from initial concept design to aftercare & servicing. This employer is based in WAKEFIELD, just a few minutes from the M1, meaning the successful Mechanical Fitter can easily commute from surrounding towns and cities, such as Leeds, Huddersfield, Castleford,...

Position: Pipe Fitter / Welder Location: Bradford Hours: 10-11hrs/day Mon-Fri, possible weekend overtime Start Date: 8th June Duration: 12 weeks PAYE Pay Rates: Mon-Fri, All Hours: £24.00/hr (including Holiday Pay) Sat-Sun, All Hours: £30.00/hr The Role: Integrate Engineering Resources is currently recruiting a team of Pipe Fitter Welders for a 12 week project on an industrial site near Bradford. Duties will include working from drawings, measuring, cutting, fabricating, fitting and TIG welding thin wall stainless steel pipework. Requirements: - CSCS / CCNSG card - NVQ / City & Guilds qualification in Pipe Fitting / Welding - Recent TIG welding codings for stainless steel - IPAF card - Experience of working on industrial sites About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction and Maintenance sectors. Our specialist recruitment activities range across all areas and include the appointment of...

Position: MMA Welder Location: Selby Hours: 10hrs paid Mon-Sun (you will usually work around 9 hours/day Mon-Fri and 6-7 hours/day Sat-Sun but be paid for 10 hours/day) Start Date: 27th May Duration: 10 weeks PAYE Pay Rates: Mon-Sun: £20.50/hr, including Holiday Pay Lodge Allowance: £50.00/day worked Gross Pay: £1785.00/week (including lodge allowance) The Role: Our client has a requirement for MMA Welders for a shutdown on a power station shutdown near Selby, immediate start for 10 weeks. Duties will include MMA welding on mild steel plate, channels, and brackets as well as assisting mechanical trades with general maintenance. Essential Requirements: - CCNSG card - Confined Space Entry certificate - Experience of MMA welding on large industrial sites (cement, power, refinery, steel) About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction & Maintenance sectors. Our specialist recruitment activities...

Position: Semi Skilled Fitters Location: Selby Hours: 10-12hrs/day paid, Mon-Sun Start Date: 27th May Duration: 10 weeks PAYE Pay Rates: Mon-Sun: £20.50/hr including Holiday Pay Lodge Allowance: £50.00/day worked Weekly Gross Pay: Approx £(Apply online only)/week The Role: Our client has a requirement for Semi Skilled Fitters for a shutdown on Drax power station. Duties will include working in confined spaces, assisting with maintenance and replacement of mechanical components across the site, including precipitator filter systems, general plant maintenance, removal and replacement of mechanical components. Essential Requirements: - CCNSG card - Confined Space Entry certificate - Experience using hand and power tools - Experience of working on large industrial sites (cement, power, refinery, steel) About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction sector. Our specialist recruitment activities range across all...

Shift Supervisor / Production Team Leader – Afternoon Shift Location: Royton, OL1 Hours: 1.45pm–10.15pm Monday–Friday (40hrs per week) Salary: £15.03ph (£31,262.40 per annum) Duration: Temp to perm, could also be perm from day one Start: ASAP Experience/Fit: Production and Supervisory experience preferred. Role and Responsibilities: As a production Team Leader/Supervisor you will be responsible for supervising production staff and managing the workflow on a shift. Key duties include: * Supervising production teams to meet output, quality, and safety standards * Monitoring daily production schedules and ensuring materials and resources are prepared for each shift * Implementing process improvements to enhance efficiency and reduce waste * Ensuring compliance with safety regulations * Training and mentoring employees, conducting pre-shift meetings, and addressing performance issues * Managing documentation and reporting deviations or quality issues Skills and...

Job Title: HVDC Engineer Contract Type: Contract (Outside IR35) Duration: 12 Months Start Date: ASAP Location: Remote (UK / Europe considered) Overview We are currently seeking an experienced HVDC Engineer to support the design and engineering activities on a major power transmission project. This is a 12-month contract role, working outside IR35, with a remote working setup. The successful candidate will support engineering teams across HVDC system design, ensuring technical deliverables are produced to a high standard and aligned with project specifications. Key Responsibilities * Support the design and engineering activities associated with HVDC transmission systems. * Review and contribute to technical documentation, design packages, and engineering studies. * Collaborate with multidisciplinary engineering teams across electrical, control, and system design. * Provide technical input into HVDC system architecture, equipment specifications, and...

Experienced Project Manager required for Mechanical asset replacement/upgrade project on a large commercial facility in Manchester. This a ‘based onsite’ contract position with a July start available and an estimated 6 month duration. . You will ideally be mechanically biased, or have demonstrable experience of managing sizeable, commercial MEP projects Duties include but not limited to: * Managing client expectations through regular dialogue and hosting meetings * Defining and planning the scope of works, costings, programmes, working with others and delivering to scheduled timescales. * Managing sub-contractors to ensure timely & successful delivery of project. * Drive progress meetings and successfully manage any project risks. * Ensuring all works adhere to, or exceed, all health & Safety standards. * Provide accurate regular written and verbal progress reports to client and project team. * Building and developing strong client relationships and...

World Class Defence Organisation is currently looking to recruit 2x Systems Design Engineer subcontractors on an initial 12 month contract.   Rate: £80.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: The role can be based either from the companies Stevenage, Bolton or Bristol sites Hybrid / Remote working: circa 4 days onsite (more remote working may be possible) Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview   Systems Design Engineer Job Description: Seekers department develop RF Seekers for use in Missile products.  Responsibilities: Working as part of team developing system architecture and design utilising MBSE. Deriving and managing requirements Communicating with various stakeholders with the Seeker team and the external customer and suppliers Developing Physical...

World Class Defence Organisation is currently looking to recruit a number of Mechanical Systems Engineer / Architects on an initial 6 month contract.  The department can have the role based from either the Stevenage, Bristol or Bolton sites.   This role would suit a candidate who comes from a strong background of working as a Mechanical Design Engineer, Mechanical Systems Engineer, Mechanical Architect or has experience of Mechanical Systems Architecture.  A defence / aerospace background is ideal but not essential. DOORS experience would be great.    Rate: £60.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage, Bolton or Bristol depending on your preference Hybrid / Remote working: 3-4 days onsite needed. Will be 5 days onsite to begin with due to training needs Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella)...

World Class Defence Organisation based in Bolton is currently looking to recruit a Night Shift General Maintenance Operator on initial 12 month contract and then ongoing and long-term thereafter.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £39.50ph   Night Shift General Maintenance Operator Job Description: We are looking for a reliable and proactive General Maintenance Operator to join our team and support the Calibration and Maintenance department in ensuring the facility and equipment remain safe, compliant, and operational. Responsibilities include: • Support the Calibration & Maintenance department with general maintenance activities across the facility. • Carry out routine facility compliance activities including:    ESD (Electrostatic Discharge) testing throughout the facility    Electrical Safety Testing of equipment and portable appliances    LEV (Local Exhaust Ventilation) filter changes and associated...

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Project Manager / Bid Lead subcontractor on an initial 12 month contract.  The role will be a hybrid role of working from home and onsite (2 days per week). This role would suit a candidate who has bid manager / bid proposals experience along with a project manager experience.  A defence / aerospace / manufacturing background would be great.  Job Title: Manufacturing Project Manager / Bid Lead Rate: £33 per hour Location: Bolton   Hybrid / Remote working: 2 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Project Manager / Bid Lead Job Description: Generation of Manufacturing Bids for Industrial Transfer packages of work, ensuring they are competitive, compliant and are...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract.     This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background.   Rate: £65.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally).  The department are happy for a Compressed week to be worked, for 4 days per week (Monday to Thursday) Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella)   Test Equipment Design Support Engineer Job Description:   We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the...

World Class Defence Organisation based in Bolton is currently looking to recruit a Test Equipment Obsolescence Manager subcontractor on an initial 6 month contract.  The role will be a hybrid position of 2 days in office, rest of the week remote.   Rate: £60 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton Hybrid / Remote working: Hybrid, 2 days per week onsite and the rest remote from home. Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella)   Test Equipment Obsolescence Manager Job Description:   We have a phenomenal opportunity for experienced Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role working close to the manufacturing environment helping to shape the design of...

World Class Defence Organisation is currently looking to recruit a Manufacturing Logistics Services Analyst subcontractor on an initial 12 month contract.   The role will be 4 days per week onsite. Your office base can be either Stevenage or Bolton (depending on your preference).    Contract Duration: 12 months initially and then ongoing. Hourly Rate: £40 per hour (Umbrella).  Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’   Manufacturing Logistics Services Analyst Job Description: Join us at the forefront of Digital Transformation, where your expertise and support will define the foundation for UK Manufacturing Logistics Services. We are embarking on a bold, group-wide Digital Transformation programme (IMPACT) that will redefine how we work, connect and deliver value across the organisation. The programme focuses on upgrading the SAP Enterprise Resource Planning (ERP) capability from its’ current version - ECC6 to S/4HANA,...

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract.    Rate: £60.00 per hour Location: Stevenage or Bolton (depending on your preference)   Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeks Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Missile Test Architect Job Description: The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and...