65 education jobs found in Newcastle-under-Lyme

Job Title: Parts Cleaner Location: Burton-on-Trent, Staffordshire ( Barton Under Needwood) Duration: Min 3 months Days: Monday to Thursday 7:00am to 4.00pm and 7.00am to 1.00pm Fridays We are currently recruiting for a Parts Cleaner for an ongoing contract based in the Burton-on-Trent area for an engineering client. Candidates must have own transport due to site location. The role of the Parts Cleaner/Inspector is to ensure that all parts are cleaned, inspected and sorted for refurbishment, re-use or disposal. Also, to ensure parts are processed in a safe manner, to the correct standard and accordance with the production schedule. Key Duties & Responsibilities: * General cleaning and preparation of engine, transmission and raft parts using manual tools, dual acting sander (DA) scrapers, etc. * Load / unload parts into cleaning machines. * Follow the relevant working instructions / process plans etc. * Inspect for signs of damage/wear. * Disassemble parts for re-use/deep...

TXM are currently recruiting for 4 x Raft Fitters based in Barton, Burton upon Trent on a contract basis. Location: Barton, Burton upon Trent Hours: 44 hours per week (Mon-Thurs 7am – 5pm and Fri 7am – 1pm) Hourly rate: £Competitive Key Responsibilities Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace Ensure all Health and safety obligations are met, and company policies are adhered to Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company’s ISO (9001, 14001 and 45001) standards and certification To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. Previous engine knowledge...

Senior Project Manager – Civil & Mechanical (Contract) Location: Capenhurst Rate: £65–£75 per hour (Umbrella) Role Purpose The Senior Project Manager will strengthen Urenco UK’s project delivery capability across its capital investment portfolio, with a particular focus on civil and mechanical engineering-led projects within a highly regulated environment. This role carries responsibility for the end-to-end delivery of strategically significant projects, either one major programme or several smaller initiatives of high business importance. You will lead projects through the full lifecycle — from set-up and initiation through implementation and close-out — ensuring that business benefits are realised and sustained. You will also mentor and guide junior project managers, supporting the development of robust project definitions, schedules, budgets, and delivery objectives. A typical project team will consist of 5–20 direct reports, ranging from blue-collar trades through to...

Title:                   Trainee Welder Location:           Birchwood, Warrington (WA3) Salary:                £13.00- £16.00 per hour (DOE) Shifts:                  Monday- Friday 08:00- 17:00 Contract Type:  Temp- perm Our client is a privately owned engineering company who work mainly with the petrochemical and food industries, are keen to train and develop a new recruit. They are ideally seeking somebody who already has some basic engineering knowledge which may have been gained in previous employment or through education. As a Trainee Welder your duties will be: -   You will learn to work from technical drawings/specification sheets. MIG/TIG Welding- you will learn to weld to a high standard. You will be involved in all areas of production and welding. The successful Trainee Welder will have the following skills: -   Must have a background in some form of basic engineering. Any exposure to any welding/fabrication would be advantageous. Previous use of tools and working in...

CE&I Control System Design Engineer – Drive Innovation in Nuclear Control Systems Join a leading engineering team working on a landmark 3-year nuclear project based in Warrington, with flexible hybrid working options. As a CE&I Control System Design Engineer, you will play a pivotal role within the Silos MSSS SEP1 & 2 design team, delivering and reviewing cutting-edge Programmable Electronic System (PES) based control system designs that support critical functional and business objectives. While implementation, testing, and commissioning are handled by dedicated site teams, your expertise will ensure that designs meet the highest quality and compliance standards from concept through handover. Required Skills: Proven experience (minimum 3 years) in PES-based Control System design on multidisciplinary external projects Strong knowledge of applicable Engineering Standards in control systems design Effective verbal and written communication skills, capable of...

Safety System Design Engineers – Driving Innovation in Nuclear Safety Join a dynamic team at the forefront of nuclear engineering as a Safety System Design Engineer. This pivotal role offers you the opportunity to contribute to a high-profile, three-year project based in Warrington, focused on designing and implementing critical safety systems that ensure operational excellence and compliance in a highly regulated industry. Working in a hybrid environment, you will collaborate with multidisciplinary teams to develop robust electrical, control, and instrumentation solutions that protect people, assets, and the environment. Required Skills Proven experience in electrical, control, and instrumentation engineering with a strong focus on safety system design Expertise in designing and verifying safety-related control systems in accordance with relevant nuclear industry standards and regulatory requirements Proficiency in safety lifecycle processes, risk assessment, and functional...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Manufacturing Engineer (Assembly and Integration) Bolton £35 per hour initially 12 months 1-stage interview Mon-Fri Certain Advantage is working in partnership with a large engineering company that operates within the aerospace industry and is currently seeking an experienced Manufacturing Engineer. As a key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.   What will you be doing? Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEAs, FAIs etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support the Non-Conformance Process using SAP.  A couple of things you should know: Formal...

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product...

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Inspector subcontractor on an initial 12 month contract.    Experience with inspecting the work of other people is essential – not just the inspecting of their own. Must have had significant recent experience of this – major part of their role.   Hourly Rate: £28.35 rising to £29.70 after 12 weeks. Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Contract Duration: 12 Months initially and then ongoing and long-term thereafter. Mechanical Inspector Job Description: Certify the product in line with the product certification procedure Examining for correct assembly Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage Intermediate inspection checks non product certification Monitor product certification operators Check and complete all paperwork associated with the manufacturing...

Title: M&E Project Engineer - Clean Water Sector Location: Liverpool Rate: Up to £500 per day (inside IR35, umbrella) Contract: 9 months with potential for extension My client is seeking a skilled Project Engineer with experience in Mechanical & Electrical (M&E) Engineering for the Water sector. Join a dynamic team delivering critical waste water treatment projects across the United Utilities framework Role Responsibilities: ·Collaborate with suppliers and site teams to manage equipment from order to on-site delivery, ensuring alignment with RAMS and QA documentation. ·Support and manage project engineering functions, including: oRAMS development oClip programme and collaborative planning oSite meetings and supervision of Tier 2 contractors as needed oCoordination with design and project management teams ·Engage in the TQ process, assisting with tracking and supply chain communications. ·Support PM with OWL and action trackers, and offer buildability...

Mechanical Design Engineers (Outside of IR35) Certain Advantage is hiring for Mechanical Design Engineers based in the Huddersfield area. This role is on a contract basis and is hybrid-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across industries—from Power Generation, Rail and more. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for Mechanical Design Engineers—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Detailed design Material selection, hand calculation, rotor dynamics Conceptual design, 3D and 2D modelling BOM and gear data generation Concession/Non-conformance assessment and resolutionThe Individual We’re looking for people who can show: Structural design practices and methodologies...

ob Title: Supply Chain Co-Ordinator Job Location: Crewe Shifts: Regular days Hourly Rate: £18.19 Paye after 12 weeks £19.82 £23.57 Umbrella after 12 weeks £25.72 Hours Per Week: 37 hours Duration: 12 Months Start Date: ASAP Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Successful applicants would be responsible for the continuation and improvement of the supply chain relationships within the nominated suppliers to ensure that material is delivered on time and within budgets. Position Tasks and Responsibilities: * Monitoring of supplier performance. * Performance reviews with supply chain. * Monitoring inventory. * Validation of material demands. * Expedite material deliveries to ensure OTD targets are met. * Negotiation with suppliers. * Maintain an inventory database. * Stock management inline with requirements of production. * PO and invoicing negotiations. * Reporting on KPI's. * Materials...

Mechanical Engineer – Temporary Contract Location: Crewe Pay Rate: £19.50 per hour (PAYE) Hours: Monday to Friday, 08:00 – 17:00 (40 hours per week) Contract Duration: 2 February 2026 – 31 May 2026 Employer: Leading facilities management provider (site-based role) We are currently recruiting for an experienced Mechanical Engineer to support operations on a large, well-established industrial site in Crewe. This is a full-time temporary role offering stable hours and competitive pay. Key Responsibilities * Carry out planned and reactive mechanical maintenance * Diagnose and repair mechanical plant and building services equipment * Ensure all works are completed safely and in line with site procedures * Complete relevant documentation and reports accurately * Liaise with site management and other engineering disciplines as required Essential Requirements * Proven experience working as a Mechanical Engineer within facilities or...

Exciting Opportunity for a Site Engineer in the Water/Wastewater Industry Role: Site Engineer Location: Stafford Rate: £450 per day - LTD/Outside IR35 (Must Provide GPS/Total Station) Duration: 12 months + Sector: Wastewater Non-Infrastructure About the business Join a dynamic contractor at the forefront of the industry, currently spearheading projects within the Bournemouth Water framework. Our commitment to excellence has opened up an exciting opportunity for a talented Site Engineer to contribute to upcoming development works linked to a large Water treatment works (WTW) in Bournemouth. Key Responsibilities: ·Execute setting out tasks with precision, ensuring accuracy in levelling and traversing. ·Collaborate with the Project Manager in overseeing day-to-day site operations, including surveying and progress reporting. ·Verify plans, drawings, and setting out co-ordinations for seamless project execution. ·Utilize modern survey methods and devices, including global...

LOCAL CANDIDATES ONLY, CLIENT NOT SUPPLYING DIGS*** Ambitek are currently recruiting on behalf of our client for an experienced HDPE Pipefitter / Fusion Welder to join an ongoing project in Northwich, supporting the redevelopment of a disused Biomass Plant. Location: Northwich, Cheshire Start Date: Immediate Duration: 3-week trial (with potential for 3–6 months ongoing work) Role Overview This position will focus on the installation and on-site fusion welding of HDPE pipework, working on straight runs installed mainly on pipe bridges. Day-to-Day Duties * Installation of HDPE pipework on site * Fusion welding HDPE lines ranging from 1” up to 10” * Working safely and efficiently to site requirements * Use of HDPE fusion welding machines and associated equipment Requirements * Proven experience in HDPE fusion welding (essential) * Confident using HDPE fusion welding machines * Valid SCATTS or CSCS or CCNSG or EMSS...

LRL are recruiting for Electricians to work on a project in Derby. Start Date: 26/1/26 Duration: 16 Weeks Hours: 50 / 60 hours a week. Duties: Installation of Conveyor Systems Requirements: ECS Gold Ipaf ( Beneficial ) Conveyor Exp 2 Project Specific References

We now wish to recruit a E&I Project Engineer to support project activities at one of our client sites in the Cheshire area. Key Responsibilities: * Lead and develop the E&I strategy of the site, ensuring compliance, reliability, and continuous improvement. * Support and guide the maintenance manager with the day-to-day maintenance activities across electrical, instrumentation, and automation disciplines including updating procedures, and preventative maintenance plans * Provide technical leadership and guidance to the maintenance team and contractors. * Support the Sr Project managers (site based & group engineering) with the design of new recycling plants * Ensure all E&I systems comply with UK regulations (e.g., BS7671, ATEX, DSEAR, PUWER, COMAH). * Oversee and ensure delivery of small to mid-sized enabling projects including automation upgrades, control system improvements, and equipment replacements. * Act as the engineering authority for...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 4pm Monday to Thursday and 7am till 1pm on a Friday Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a realistic timeframe. To mentor trainees / apprentices when applicable. To ensure that waste is disposed of in the...

Job Title: Gear Grinder Location: Burton-on-Trent, Staffordshire Duration: 6 months contract (min) Pay Rate: DOE Hours: 7am-4pm Monday to Thursday., 7am -1pm Friday Our Engineering client based in Barton Under Needwood is looking for an experienced Gear Grinder (Previous experience of Reishauer, Niles, and Pfauter gear grinding machines would be advantageous) Role: The role of the Gear Grinder is grind gear teeth to drawing specification. Key Responsibilities & Activities: * Use of a wide range of measuring equipment to check components. * Writing and interpreting instructions and procedures to assemble equipment and products accurately. * Obtaining relevant information from the relevant sources * Controlling machines and processes. * Performing inspections of equipment, structures, materials, and products. * Analysing information and finding the best solutions to problems. * Maintaining clear and honest communication at all times. * Keeping the work environment...