30 education jobs found in Sefton

Engineering Teacher – Full Time (Immediate Start) Good Ofsted Secondary School, North Liverpool Through Teaching Personnel | Paid to Scale | Potential Permanent Position Teaching Personnel is seeking a dedicated and knowledgeable Engineering Teacher to join a reputable, Good Ofsted-rated secondary school in North Liverpool. This is a full-time position with an immediate start, and the role offers the potential to become permanent for the right candidate. About the Role The successful candidate will deliver high-quality Engineering lessons across Key Stages 3 and 4, contributing to a dynamic and well-resourced Technology and Engineering Department. The school is recognised for strong leadership, a positive learning culture, and a commitment to staff development. Key responsibilities include: Planning and delivering engaging and technically accurate Engineering lessons. Supporting students in developing practical skills, problem‑solving abilities, and confidence within STEM...

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Manufacturing Engineer (Assembly and Integration) Bolton £35 per hour initially 12 months 1-stage interview Mon-Fri Certain Advantage is working in partnership with a large engineering company that operates within the aerospace industry and is currently seeking an experienced Manufacturing Engineer. As a key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.   What will you be doing? Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEAs, FAIs etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support the Non-Conformance Process using SAP.  A couple of things you should know: Formal...

An experienced Electrical Design Engineer is required on a contract basis to support a growing workload within a well-established building services engineering consultancy. This is an excellent opportunity to work on a range of technically challenging projects across multiple sectors, collaborating with an experienced multidisciplinary design team. Long term duration, outside of IR35. The successful candidate will be responsible for delivering electrical building services designs from concept through to detailed design stages. Key Responsibilities * Design and develop electrical building services systems including power distribution, lighting, emergency lighting, fire alarms, data and security systems * Prepare technical drawings, calculations, specifications and reports * Produce and review design documentation across various project stages * Work collaboratively with mechanical engineers, technicians and external consultants * Ensure designs comply with UK...

Due to increased work load, we are looking to recruit a Document Controller to join a leading international engineering business based near Brighouse on a Temoporary basis until Christmas. This role will act as the primary resource for the Project Managers in providing document control management on assigned projects within the Projects Department. The ideal candidate will have a background working with in a document controlling position within an engineering based environment This role is based on site 5 days per week Key Responsibilities and Specific Accountabilities: Objectives: * Take full responsibility and ownership of all document control activities on assigned projects. * Adhere to company processes and procedures with regards document control routines and functions. * Deliver project document control services in accordance with clients’ requirements for projects. * Transmittal of documents to and from clients. * Control and verification of incoming...

Mechanical Design Engineers (Outside of IR35) Certain Advantage is hiring for Mechanical Design Engineers based in the Huddersfield area. This role is on a contract basis and is hybrid-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across industries—from Power Generation, Rail and more. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for Mechanical Design Engineers—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Detailed design Material selection, hand calculation, rotor dynamics Conceptual design, 3D and 2D modelling BOM and gear data generation Concession/Non-conformance assessment and resolutionThe Individual We’re looking for people who can show: Structural design practices and methodologies...

Ref: (phone number removed) Location: Mobile role covering Merseyside (L30) Hours: Monday to Friday 8am-5pm Pay: £39,000 per annum + overtime & call out Duration: Ongoing Contract – Long Term/Temp to Perm Notes: Candidate will be given a work van to use for work purposes only. The candidate must be willing to join the on-call rota immediately and will be paid on call rates during this time.    Duties This is a role for a proven LV Authorised 18th edition qualified Electrical Technician. Supported by a strong operational team, the focus is developing, maintaining and improving the Electrical systems across the clients commercial estate. Demonstrate the ability to maintain plant and equipment to agreed specifications and operation Develop an in-depth knowledge of the relevant individual contracts Ensure paperwork is up to date and correctly completed Ensure all jobs are closed down promptly Carry out the defined planned maintenance regime for all contractual...

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock...

Recruit4staff are representing a well-established fabrication specialist business in their search for a Fabricator Welder to work in Bromborough Job Details: Pay: £20.00 per hour (Overtime paid at time and a half and double time) Hours of Work: Monday to Thursday – 8:00am – 16:30pm, Friday – 8:00am – 15:30pm Duration: Temporary (Ongoing) Benefits: PPE provided, on-site parking, overtime opportunities, potential for long-term work Job Role: The Fabricator Welder will be responsible for carrying out light and heavy fabrication work on mild and stainless steel within a busy fabrication workshop environment. The Fabricator Welder will complete MIG and TIG welding tasks, working from detailed engineering drawings to produce structural and architectural steel components. Duties will include marking out, section cutting, sheet metal work, and fabrication of structural steel and pipework. The Fabricator Welder may also support occasional site work across manufacturing sites when...

We are recruiting 2x experienced Pipefitters for contract work on a nuclear site near Preston. This role requires proven experience working on carbon and stainless steel pipework in highly regulated environments, such as nuclear, oil & gas, petrochemical, or power generation. This is a full-time, site-based role, so local candidates are preferred. Details Location: Preston area Start: ASAP (subject to BPSS / SC clearance - typically 1-2 weeks) Duration: 6-month initial contract, likely extension Future work available in Chester with the same client Hours: 39 per week Mon-Thurs 8.5 hrs Fri 5 hrs Overtime: Possible but not guaranteed Rate: £27.00 per hour Pay: CIS or Umbrella PAYE Requirements Time-served Pipefitter / NVQ Level 3 or equivalent Experience with carbon & stainless steel pipework Previous work in nuclear / oil & gas / heavy industrial environments Able to read drawings and work under permit systems CCNSG / Safety Passport preferred Must be eligible for...

We are recruiting an experienced TIG Welder for contract work on a nuclear site near Preston. This role requires proven experience welding carbon steel and stainless steel pipework in highly regulated environments, such as nuclear, oil & gas, petrochemical, or power generation. This is a full-time, site-based role, so local candidates are preferred. Details Location: Preston area Start: ASAP (subject to BPSS / SC clearance - typically 1-2 weeks) Duration: 6-month initial contract, likely extension Future work available in Chester with the same client Hours: 39 per week Mon-Thurs 8.5 hrs Fri 5 hrs Overtime: Possible but not guaranteed Rate: £27.00 per hour Pay: CIS or Umbrella PAYE Requirements Time-served Welder / NVQ Level 3 or equivalent Proven TIG welding experience on carbon & stainless steel pipe Experience working to WPS / weld procedures Previous work in nuclear / oil & gas / heavy industrial environments Ability to pass site weld tests if required CCNSG /...

World Class Defence Organisation is currently looking to recruit a Supply Chain Manager subcontractor on an initial 6 month contract.    Rate: £50.00 per hour Location: Stevenage or Bolton, depending on your preference. Hybrid / Remote working: 2 days onsite per week Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Supply Chain Manager Job Description: An opportunity has arisen for a Supply Chain Manager to join ISP in the Equipment's team. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management. As a team, we work across all programmes in a changing environment, managing and implementing both mature and new technologies. Responsibilities /Skillset/experience required: Internal and external assessment skills/knowledge;...

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to...

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract.  Looking for somebody with substantial test engineering experience. Diagnosis of test failures Testing experience down to component level The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills.  Hourly Rate: £37.00ph (Umbrella).    Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)   Development and Production Test Engineer – Electronic / Electrical Job Description: Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Provide Test Engineering support during Design / Development phases from initial...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Plastics / Chemical Operators. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph.  Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter). Plastics / Chemical Operators Job Description: This involves working with small hand tools and masking tape, manually applying protective resin coatings to assembled circuit boards. Excellent Dexterity is a must have, and any experience working with small brushes, either in their personal time or professional life, would be an excellent skillset. The Plastics operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific...

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract.   This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production...

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office.  This role will be a hybrid position – 3 days per week onsite and 2 days remote.      Hourly Rate: £60 - £85 (Umbrella).      Contract Duration: 6 Months initially and then ongoing and long-term thereafter.   Missile Electronic Architect Job Description:   Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It’s an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions...

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract.   Rate: £30.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage onsite Interview Project Officer Job Description: This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established company project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project...

World Class Defence Organisation based in Stevenage and Bolton is currently looking to recruit 4x Supplier Quality Engineers.   A strong background of Supplier Quality Engineering / Auditing is required.  Defence, Aerospace or Automotive industries would be great.   Rate: £45.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage or Bolton – depending on your preference   Hybrid / Remote working: The role will likely be 1-2 days per week onsite and the rest working remote Duration: 6 or 12 Months initially with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview   Supplier Quality Engineers Job Description:   An exciting opportunity has arisen for a Supplier Quality auditor to join the Supplier Quality Assurance team, supporting assurance of Mechanical & Electro-Mechanical suppliers   This...