457 jobs found in Shrewsbury

Project Engineering Consultant Position Type: Contract Location: Cheshire Categories: Project Management, Engineering PM Group requires an Project Engineer with chemicals manufacturing experience to lead a client team in Cheshire. Responsibilities * Working alongside existing client engineers, managers, and directors. * Leading the multidisciplinary project team through all stages of the projects from engineering to construction to commissioning and handover. * Ensuring that the projects are delivered on time, within budget, and in-keeping with industry standard best practices. * Deliver engineering projects in a safe, efficient, and timely manner, ensuring that all work carried out meets the requirements of the business and complies with relevant legislation in force at the time. * Ultimately accountable for a multi-million-pound portfolio of capital projects for the sustenance and expansion of the Chemical Site. * Review and manage safety and regulatory requirements...

Engineering Technician required for a contract based at a Pharmaceutical plant at Speke, Liverpool. 2 Days, 2 Nights- 12 hour shifts, 4 days off The work will involve routine and preventative maintenance on all associated clean room equipment involving high speed centrifuges, ultrafiltration, pumps, valves, motors and diaphragm valves. Previous experience of working on the above equipment and in the pharmaceutical industry is preferred. Candidates with FMCG and high speed packaging lines will also be considered

EC&I Project Engineering Consultant Position Type: Contract (Outside IR35) Location: Lancashire, England Categories: Engineering PM Group requires electrical, controls and instrumentation project engineering support on a chemical manufacturing site in Lancashire. Responsibilities * Leading and developing electrical, controls and instrumentation elements of the project design. * Providing electrical, controls and instrumentation expertise and electrical technical guidance to the project team. * Designing and overseeing the installation and testing of instrumentation and controls systems through to handover. * Developing practical, cost effective engineering designs and taking full account of the many competing factors (technical, operational and economic). * Focusing on C&I loop design, instrumentation panel design, instrumentation specification, control system interfaces, single cable calculations, PLC/DCS interface design, SIS design, instrumentation hazardous...

Multiskilled Engineer Shift role The Company: My client is one of the largest independent providers of property maintenance services in the UK, providing both Planned Preventative and Reactive Maintenance to thousands of clients across tens of thousands of locations around the UK. They provide, Mechanical & Electrical, Fabric, Air conditioning and Combustion, maintenance, and installations to commercial & retail environments. They are national specialists in planned and responsive maintenance and all of there services are based on `self delivery`, which means that they employ only the best, fully qualified in-house technicians and engineers to maintain quality standards. Due to sustained period of growth, we are recruiting for a qualified Electrical Maintenance Engineer to work on a static commercial site in Edingburgh, you will be required to work Monday-Friday 8am-5pm on a temporary basis then on a permanent on a shift basis. Essential skills: * Experience...

Plumbing Supervisor Location: Shrewsbury (SY3) Rate: £30ph (Personal CIS) Hours: 07:30-18:00 (Mon-Thurs) & 07:30-15:00 (Fridays) Duration: 3-4 months’ worth Immediate start Nelson Permanent Placements have an exciting opportunity working with our client who are a UK leading M&E contractor on a large Commercial site in Shropshire. They are currently looking for a Plumbing Supervisor to work on a Project in Shrewsbury (SY3). You will be required to help out with the office and also work on site itself. Plumber Requirements: * A Valid CSCS Plumber Card & SSSTS * A Valid IPAF Card * A C&G or NVQ Level 2/3 Cert in Plumbing. * 2-3 years' experience as a Plumbing Supervisor (within Commercial settings). Please note - If you have experience with HDPE Electrofusion methods it would be advantageous. How to Apply: Please send your CV to the email address detailed below. Should you wish to discuss other opportunities in your area, you are welcome to...

Calibration Technician – Mechanical & Dimensional Metrology 📍 Telford | On-site 💷 £20–23 p/h (depending on experience) 🕐 12-month contract (likely to extend) Are you a mechanical or dimensional calibration specialist who enjoys working with precision measurement equipment? Do you take pride in accuracy, traceability and doing things properly? We’re supporting a well-established Telford Service Centre that calibrates and maintains precision mechanical and dimensional measuring equipment used across manufacturing, aerospace, automotive and engineering environments. 🛠️ What you’ll be working with You’ll be hands-on with equipment such as: 🔹 Micrometers 🔹 Verniers & calipers 🔹 Dial & height gauges 🔹 Torque wrenches & torque tools 🔹 Pressure & displacement instruments 🔹 Dimensional and mechanical fixtures Most work is lab-based in Telford, with occasional customer site visits (typically less than 25%). 🧰 What you’ll be doing ✔️ Calibrating, validating and...

Job Title: Quality Engineer Clearance Required: BPSS Location: Telford with 2 days/week in office Salary: £55,000 - £60,000 We are actively looking to secure a Quality Engineer to join Experis. Experis Consultancy is a Global entity with a well-established team with over 1000 consultants on assignment across 20 clients globally. Our UK operation is growing and has very aggressive plans for expansion over the coming years. We form part of the Manpower group of companies that turn over $20 billion a year collectively. Experis UK have partnerships with major clients across the UK spanning multiple industries; our approach is a very personal one, with both our clients and our own employees. We are passionate about training, technology and career development. Job Description: Quality Engineers are the custodians of quality within the scrum team, who implement the Core Modernisation Test Strategy and Project Test Approaches defined by the QA and QA Service Leads. They embody...

Skilled TIG Welder (Stainless & Pressure Vessels) Location: Ellesmere, SY12 Work Type: Precision Engineering / High-Integrity Systems The Role Forget the monotonous production lines. We are looking for a precision-focused TIG Welder to join our team in Ellesmere. This role is about integrity, aesthetics, and technical skill. You will be working primarily with Stainless Steel, focused on pressure vessels and high-pressure washing systems. If you enjoy work where every weld is critical and quality is the primary metric, this is the workshop for you. What You'll Be Doing High-Spec Welding: Precision TIG welding on stainless steel components. Pressure-Critical Work: Fabricating parts for refrigeration or pressure-wash systems where "good enough" isn't an option. Technical Interpretation: Working from blueprints and schematics to build custom or low-volume units. Quality Control: Ensuring all welds meet pressure-testing standards and look as good as they perform....

Shift Cover Maintenance Engineer - Wrexham £27 - £35.00 Per Hour 8- 12 HR Shifts Days/Nights gap technical are proud to be representing this market leading manufacturing business in their search for a Shift Cover Maintenance Engineer to work at their facility based near Wrexham This work is ideal for Engineers that are looking for additional income whilst working shifts or Engineers that are looking for Part Time work Performance Objectives To support the manufacturing process by responding effectively to equipment breakdowns, carrying out scheduled maintenance work and being proactive on the correction and modification of reoccurring machine processing faults. To respond effectively to equipment breakdowns and ensure maximum focus is given to their nominated production area To fault find in an effective and efficient manner whilst utilising the various machines historic / information documentation To establish harmonious relations with the operational staff and to work...

Engine Performance & Emissions Engineer Stafford (Site based) 12 Month Contract: likely to be extended 37 Weekly Hours: Monday – Thursday 08:00–16:30, Friday 08:00–13:00 (Some Flexibility Offered) Up to £51.30p/h or £37.80p/h PAYE (Depending on experience) Whether it’s advancing the next generation of high‑horsepower engines or driving innovation in performance and emissions technology, this role places you at the heart of meaningful engineering impact. As an Engine Performance & Emissions Engineer, you will be working in a globally respected engine manufacturer backed by a Fortune 100 organisation, contributing to products used in critical power‑generation applications across more than 150 countries! In this role, you will develop, optimise and validate engine performance and emissions calibrations while working hands‑on within test environments. You will be translating product objectives into technical execution, collaborate with multidisciplinary teams, and deliver...

We are seeking an experienced Performance Engineer to join a Diesel Performance, Emissions and Validation team within a Product Engineering environment based in Stafford. This is a 12-month contract role offering the opportunity to work on both current production engines and new product introduction programmes. Performance Engineer (Diesel Performance & Emissions) Location: Stafford Rate: £50.00 - £51.31 per hour Contract: 12-month contract (Inside IR35) The Opportunity We are seeking an experienced Performance Engineer to join a Diesel Performance, Emissions and Validation team within a Product Engineering environment based in Stafford. This is a 12-month contract role offering the opportunity to work on both current production engines and new product introduction programmes. You will be responsible for delivering engineering activities that develop engines to meet performance and emissions targets, supported by structured test work. The role has direct impact on...

Exciting Opportunity for a Site Engineer in the Water/Wastewater Industry Role: Site Engineer Location: Stafford Rate: £450 per day - LTD/Outside IR35 (Must Provide GPS/Total Station) Duration: 12 months + Sector: Wastewater Non-Infrastructure About the business Join a dynamic contractor at the forefront of the industry, currently spearheading projects within the Bournemouth Water framework. Our commitment to excellence has opened up an exciting opportunity for a talented Site Engineer to contribute to upcoming development works linked to a large Water treatment works (WTW) in Bournemouth. Key Responsibilities: ·Execute setting out tasks with precision, ensuring accuracy in levelling and traversing. ·Collaborate with the Project Manager in overseeing day-to-day site operations, including surveying and progress reporting. ·Verify plans, drawings, and setting out co-ordinations for seamless project execution. ·Utilize modern survey methods and devices, including global...

A prestigious manufacturing business in the West Midlands is looking for Skilled TIG Welders who are flexible to work rotating shifts. Please do not apply unless you're an Aerospace TIG welder. Aerospace TIG welders are the only candidates who will be considered based on the client's requirements. The role involves thin wall welding of stainless steel, Inconel and aluminium, so, you must have experience working with these materials. Experience in welding thin gauge material is essential. Job Description: • Read and understand engineering drawings • Adhere to technical specifications • Self-inspection of welds following initial training Requirements: • The ideal candidate will be apprentice trained; time served with City & Guilds or equivalent qualification in welding. • Previous welding experience in thin gauge Aluminium, Inconel or Stainless Steel • Good team member • Ability to communicate with colleagues • Willingness to be flexible and adaptable • Must have...

A global leader in its market is looking for experienced Manufacturing Engineers to join its burgeoning operation in the Wolverhampton area. Title: Manufacturing Engineer The role will begin on a 12 month minimum basis, with the term likely to be extended comfortably beyond this. Some contractors will be offered the chance to transition onto the permanent workforce. The standard working week is 37 hours but average hours in these roles varies between 37-45 hours per week. The advertised rates are umbrella values. Position summary: The expectation of the Manufacturing Engineer will be to support the company value streams in achieving >95% OTD and associated quality metrics (SRR). The Manufacturing Engineer will be expected to liaise with suppliers and customers as required and support daily production & programme needs. Occasionally the Manufacturing Engineer will be required to carry out tasks outside their normal remit and hours, so flexibility is essential....

EC&I Engineer (Electrical, Control & Instrumentation) – Contract 📍 Wolverhampton | UK Job Type: Contract Sector: Nuclear / Defence / Industrial Automation We are recruiting an EC&I Engineer (Electrical, Control & Instrumentation) for a contract position based in Wolverhampton. This role supports the delivery of safety-critical and high-integrity control systems for projects within nuclear decommissioning, defence, waste management, and nuclear new build environments. The successful EC&I Engineer will be involved in the full engineering lifecycle, including design, development, testing, installation, and commissioning of complex electrical and control systems. Key Responsibilities * Design and deliver EC&I systems for nuclear and industrial projects * Electrical design including control panels, wiring diagrams, and schematics * PLC programming, configuration, testing, and fault-finding * Develop, test, and commission...

Morson are working with an aerospace manufacturer who are looking for a quality inspector to join the team based at their Wolverhampton site. What will your day-to-day responsibilities look like? Carry out final inspection of machined components before booking into stores and release to assembly. Check all parts against drawings, specifications, and process documentation. Perform visual and dimensional inspections using gauges, micrometers, verniers, and other precision tools. Record and report turn backs to highlight issues and drive continuous improvement. Work closely with fellow Final Viewers to maintain flow and consistency. Liaise with Shift Managers and Operations Managers on inspection progress, part status, and quality issues. Support problem-solving activities and process improvements when issues arise. Keep documentation up to date and maintain compliance with aerospace quality standards. Uphold Safran's commitment to safety, accuracy, and right-first-time...

Job Title: MIG Welder Job Type: Full-Time, Permanent Location: Wolverhampton Pay Rate: £13.75 - £14.00 per hour (depending on experience) Working Hours: Monday to Friday, 7:00am - 3:00pm Job Overview We are recruiting an experienced MIG Welder to join a well-established UK manufacturer specialising in heavy-duty fabricated steel products and vehicle-mounted equipment for demanding operational environments, including waste handling and specialist vehicle applications. This is a hands-on role suited to a skilled welder with experience in structural and heavy fabrication, working to high quality and durability standards. Key Responsibilities MIG welding of heavy-gauge mild steel components used in vehicle-mounted and engineered equipment Welding fabrications such as frames, arms, brackets, and assemblies Reading and interpreting engineering drawings and fabrication instructions Setting up and adjusting welding equipment to suit material thickness and job requirements...

We are currently looking for a Mechanical Inspector on a as required basis based in Wolverhampton. Candidate must have Dual or US citizenship Job Description: The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application. Requirements: Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 - Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders...

We are seeking an experienced Supplier Quality Engineer to support and enhance the quality performance of our clients existing team, a market leader in the Aerospace Industry. In this role, you will help drive best‑in‑class practices that minimise defects, reduce variation, and ensure consistent adherence to required quality standards. You will also play a key part in strengthening compliance, improving supplier capability, and contributing to a continuous improvement culture. Summary: Start date: February 2026 Duration: 6 months with potential to be extended Location: Wolverhampton WV10 Pay Rate: £38 - £45.00 per hour PAYE Hours: 37 per week Monday to Friday Flexible start and finish times! Key Responsibilities Conduct supplier, internal, and external audits (e.g., ISO 9001, AS9100) to maintain approvals. Manage supplier performance using scorecards, maturity assessments, and improvement actions. Support governance of supplier compliance, including escape management and closure...

We are currently looking for a Mechanical Inspector on a as required basis based in Wolverhampton. Candidate must have Dual or US citizenship Job Description: The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application. Requirements: Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 - Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders...