234 jobs found in Stoke-on-Trent

Job Title: HGV Mechanic / Technician Location: Stoke-on-Trent Duration: Temporary to Permanent To carry out inspection, servicing, diagnostics and repair of light vehicles and/or HGV trailers, ensuring all work meets safety standards and MOT requirements. Key Responsibilities Heavy Vehicle Mechanic / Technician * Service, maintain, and repair HGV trailers. * Prepare vehicles for MOT inspections. * Carry out fault finding and mechanical repairs. * Support electrical fault diagnosis where required. Light Vehicle Mechanic * Carry out servicing and maintenance on cars and vans. * Inspect vehicles to MOT standard. * Diagnose faults using appropriate diagnostic tools. * Perform repairs on light commercial vehicles and cars. * Work collaboratively within a team of technicians. Key Skills & Experience * Proven experience as a Mechanic or Vehicle Technician. * Knowledge of light vehicles and/or HGV trailers. * Experience with diagnostics and fault finding. * Ability to work...

Role: Project Manager Sites: Midlands Framework: Severn Trent Water IR35: Outside Pay rate: £400 to £410 Skills: WTW management experience is essential Familiar with STW Standards IT skills: P6, Ms Project Civils and Mechanical bias ideally, not electrical

We are recruiting Panel Wirers for a specialist engineering company in Stoke-on-Trent, focused on fitting industrial scanning systems and electrical control panels onto large commercial vehicles and trucks. The role involves installing complex electrical systems and control panels onto vehicle chassis. You'll be working from engineering drawings to wire, fit, and terminate electrical components and cabling for industrial-grade scanning and automation equipment. Key Responsibilities: Electrical installation of scanning systems and control panels on large vehicles Wiring complete systems onto truck and van chassis Fitting of data and comms cabling including RJ45, Cat5/Cat6 General mechanical fitting: marking out, drilling, tapping, bracket fitting Reading and interpreting engineering wiring diagrams and schematics Using hand and power tools for installation tasks Experience with vehicle conversions is beneficial

Cure Talent are delighted to be partnered with an established medical device manufacturer as they appoint a Product Development Scientist to join their R&D function on an initial 12 month fixed term contract. This is offered on an initial 12 month fixed term contract, with a strong likelihood of transitioning into a permanent position thereafter. The position has arisen due to maternity leave within the team and is positioned as a genuine opportunity to embed yourself within a growing development function. As the new Product Development Scientist, you will play a hands on role within new product development, line extensions and design changes across a portfolio of sterile, single use medical devices. This is a practical, laboratory focused role, with clear responsibility for physical testing, design control documentation and validation support. You will work closely with Regulatory, Quality, Operations and Commercial teams to ensure projects are delivered in line with...

We are currently recruiting for a Paint Craft Auxiliary to support workshop technicians in the preparation and refinishing of a wide range of equipment used in high-spec operational environments. Stafford (Fully Onsite) 6-Month Contract £20.52 per hour (Umbrella) Monday to Friday This is an excellent opportunity for someone with hands-on workshop or trade experience who takes pride in quality, safety, and attention to detail. The Role You will support technicians in preparing and refinishing equipment including mechanical components, woodwork, specialist equipment, and other technical assets. Duties will include: * Maintaining a clean, organised workshop environment * Monthly toolbox checks and consumables stock control * Carrying out Before-Use Inspections (BUI) and cleaning machinery/tooling * Managing deliveries, stores, and associated paperwork * Supporting urgent despatch requirements * Ensuring compliance with Health...

Are you looking for a new opportunity in your career? Interested in joining a dynamic team working state of the arc vehicles? Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and...

Job title: Electrical/HVAC Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon -Thurs 8am - 4.30pm (with flexibility to work shifts) Friday Early finish 12.15pm Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered: Rolling Stock, Automotive, Marine, Aviation, Military, HGV Technicians, Aerospace, HVAC Technicians, Vehicle Technicians, Electricians, Electrical Engineers, Plumbers Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Electrical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Electrical Overhaul of Rail HVAC units Candidates will be required to carry out the following duties: * HVAC overhaul, damage repair and engineering * Read...

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing, axle and wheel...

This is a fantastic opportunity to work for an established ecommerce company on a long term remote contract as a Data Engineer, Inside IR35. The key skills required for this Data Engineer position are: Python SQL ETL Azure Databricks If you do have the relevant experience for this remote Data Engineer position, please do apppy

Location: Stafford Rate: £29.50 FCSA Umbrella (Inside IR35) or £21.50 PAYE Based within the Facilities Engineering department of a global automotive company, this role focuses on building and refurbishment work across the site, covering both new facilities/structures and the renovation of existing manufacturing areas. The environment is fast-paced, with larger long-term projects running in parallel with smaller, quicker turnaround jobs. A key part of the role is managing construction safety within a live manufacturing setting, ensuring ongoing work does not disrupt operations and that staff can continue working safely throughout. Requirements: * Strong safety/ compliance procedures experience within a similar role. * Be able to conduct risk management/assessments and safety training

Rubicon Consulting is currently recruiting for Supplier Quality Technician on a 12 Month Contract, based in Stafford. Role Summary We are currently seeking a Supplier Quality Technician to support shop-floor quality activities at our manufacturing facility. This is a hands-on, site-based role focused on supplier issue. Follow-up, defect documentation, and rework support. Key Responsibilities • Daily follow-up of supplier-related quality issues on the shop floor • Identification and documentation of defects and non-conformances • Taking photos and videos to support quality records and reporting • Supporting and monitoring supplier rework activities on site • Liaising with Quality and Manufacturing teams to close quality issues • Supporting basic root-cause and problem-solving activities • Ensuring quality and safety compliance within the factory environment Requirements • Previous experience in a manufacturing or shop-floor quality role • Experience in HVDC, power...

Location: Stafford – Full Time Onsite Contract Length: Until 15 August 2026 IR35 Status: Inside IR35 Pay: £21.52 per hour via Umbrella Key Responsibilities * Perform testing, diagnostics, repair, maintenance, modification, calibration, and manufacture of equipment down to module or component level using approved engineering documentation and techniques. * Carry out planned and ad-hoc advanced repairs using technical documentation, Approved Source Information (ASI) and OEM data. * Support the surveying, refurbishment, and maintenance of Ground Support Equipment (GSE). * Undertake reverse engineering and development activities, including producing engineering documentation and test procedures where required. * Hold responsibilities for self-certification, over-signing, and conditioning of equipment (serviceable, unserviceable, or scrap). * Support the supervision, training, and mentoring of junior technicians and apprentices....

RAMS Engineer Certain Advantage is hiring for a RAMS Engineer based in the Staffordshire area. This role is on a contract basis and is site-based. The Company We’re working with an engineering company specialising in solving complex engineering challenges across industries—from Power Generation, Rail and more. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a RAMS Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Conduct RAMS studies for HVDC projects and tenders, covering both LCC and VSC. Define spare part requirements and maintenance strategies. Establish and monitor RAMS study structures, processes, and KPI. Chair 3D Model Reviews with a specific focus on maintainability. Lead engagement with OEMs, and manage interface control documents. Direct...

Job Title: RAMS Engineer Location: Staffordshire (100% on-site) Contract Type: 12-Month Contract The Role We are seeking a highly motivated and experienced RAMS Engineer to join a global team of subject matter experts. This position focuses on high-voltage electrical equipment, specifically within HVDC (High Voltage Direct Current) systems. In this role, you will be responsible for coordinating, creating, verifying, and validating reliability, availability, and maintainability (RAM) models for HVDC systems and subsystems. You will manage project risks throughout the lifecycle, enforce engineering discipline, drive quality processes, and provide technical leadership and training to both customers and internal stakeholders. Key Responsibilities RAM Studies & Strategy Conduct RAMS studies for HVDC projects and tenders, covering both LCC and VSC technologies. Define spare part requirements and maintenance strategies. Establish and monitor RAMS study structures,...

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

We’re Hiring: Time Served Fabricators – Winsford 🚨 Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Fabricators. 🔧 The Role As a Fabricator, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate materials * Ability to work independently from...

Quality Technician (days) Winsford £14.26 per hour + overtime (x1.25/x1.5) Contract to permanent role (benefits)   Certain Advantage is partnering with an automotive manufacturer to recruit an experienced Quality Technician. You will be responsible for ensuring all products are completed to specification and up to the highest quality standard.   Key Responsibilities: Oversee the completion of each product to required specifications. Conduct thorough quality assessments throughout the production process. Carry out final checks on all finished items prior to presentation and customer dispatch. Confirm that all products comply with relevant type approval standards. Produce and submit a detailed quality report for every finished product. Comply fully with Health & Safety legislation and company safety procedures. Reduce material waste through careful and efficient use of resources and consumables.  Your Background: Highly organised, motivated, and proactive with strong...

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

Service & Maintenance Engineer - Level 2 Are you a skilled engineer looking for a dynamic role in the rental energy sector? We are seeking a proactive Service & Maintenance Engineer (Level 2) to join our Power Rental team. You will play a key role in delivering high-quality electric power projects across the UK and Ireland. The Role As an Individual Contributor within our Operations department, you will ensure our rental equipment-including generators, load-banks, and transformer's in peak condition to support our diverse client base. Key Responsibilities: Maintenance & Inspection (20%): Inspect, service, and maintain rental equipment (generators, fuel tanks, load-banks, etc.) according to strict schedules. Site Leadership (20%): Lead site installations, commissioning, and decommissioning of rental solutions, including the synchronisation of multiple generators. Technical Support (25%): Perform in-depth repairs and troubleshoot complex technical problems efficiently...

Ambitek are currently recruiting for a General Operative for ongoing site work in Northwich. This is a great opportunity for candidates with relevant site experience looking for consistent work. Key Requirements: * Valid CSCS card * Confined Spaces certification (essential) * Previous site work experience * Reliable and able to work as part of a team Role Overview: You will be supporting site operations, assisting with general duties, and ensuring work areas are maintained to a high standard of safety and cleanliness. What’s on Offer: * Ongoing work * Immediate start * Opportunity to work on a busy, active site ***Local candidates only please