107 engineering jobs found in Swindon

Role: Project Coordinator Hours: Monday-Friday 40 hours per week Location: Bristol Start Date: ASAP, up to 4 weeks We have an exciting opportunity for a Project Coordinator to support a long-term engineering project where vehicles are going through a full transformation project, this is a highly regulated industry with experience to grow. We are looking for someone who ideally has experience within Engineering (Construction, Manufacturing etc.) coordinating projects or working as an assistant project manager. You will be responsible for managing the full project administration process on Microsoft Project, being a key client interface and supporting the project as it enters a critical phase in the process. Should you believe you are suitable, apply for the position and we will be happy to provide further information on the project

Talentmark are recruiting for a QC Microbiology Technician to join a global healthcare provider to hospitals, clinics and homes on a contract basis for 11 months. This role is based at the client's site in Swindon.    Salary: £13.58 per hour PAYE.   Shift This role is days only, (Apply online only), but is on a rotating shift including weekends.  QC Microbiology Technician Role: Test the microbiological properties of materials and products. Collect Environmental monitoring and water samples. Update the batch tracker with Microbiology testing dates. Keep environmental monitoring tracking spreadsheets up to date, including trending data and transcription checking. Provide technical support to Scientist 2 and Senior Scientist, including technician duties when required.  Your Background: Hold a relevant scientific qualification or have working experience in a lab. Good knowledge of microbiology and testing techniques. Have an understanding of GMP/GLP environments. Ability to...

Site Engineer – Civil Engineering Swindon, Wiltshire An established regional civil engineering contractor is looking to recruit a Site Engineer to join a live project in Swindon. Required to provide accurate setting out for carriageway, footpaths, pumping station and drainage works using GPS kit. Working alongside an established site team and one other engineer to offier technical support and raise any design or specification queries Requirements * Proven experience in setting out civil engineering works, ideally roads and drainage * Proficiency in AutoCAD (you’ll need your own laptop with AutoCAD installed) * Valid CSCS card and eligibility to live and work in the UK * Strong attention to detail and ability to work independently This role can be paid on a CIS basis or limited company can be considered. Please feel free to get in touch with Danny Mayhew with any questions about the project or job role. Run Resourcing Ltd acts solely as a recruitment intermediary...

Geotechnical Engineer Outside IR35 3 Month contract Duties Liaison with the Contractor, Project Manager and Employer's Representative. Reviewing of testing activities against the requirements of the Specification and Contractor's Inspection and Test Plan (ITP). Observing and commenting on the quality of the earthworks' activities and compliance with the Specification and Contractor's Method Statements. Reviewing the adequacy of soil/fill sampling as required under the Specification and ITP and advising the Contractor of the results in order to allow the satisfactory progress of the works. Auditing the Contractor's records against the requirements of the Specification and the Contractor's Quality Control Plan. Maintaining daily records of activities and a photographic log Input into the final audit completion reportersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on...

Emergency Lighting Engineer (Subcontract) – Swindon – £230 per Day + Expenses We are currently recruiting for an experienced Emergency Lighting Engineer to support a well-established fire and life safety company on a subcontract basis, covering Swindon and the surrounding areas. This is an excellent long-term contract opportunity for an engineer with experience carrying out the testing, inspection, servicing and maintenance of emergency lighting systems across commercial and industrial sites. Package & Benefits • £230 per day • Expenses paid • Long-term subcontract opportunity • Regular ongoing work • Weekly payments • Immediate start available Role & Responsibilities • Carrying out the testing, inspection, servicing and maintenance of emergency lighting systems • Completing emergency lighting inspections in line with BS 5266 standards • Fault finding and carrying out remedial works where required • Replacing defective emergency lighting fittings and components • Completing...

QC Microbiology Technician - Swindon Opportunity: This is a brand new position that has been created due to expansion. My client is a global pharmaceutical manufacturing company are looking to recruit an experienced Microbiologist where you will be carrying out high volume microbiology testing on finished drug products. Duties and responsibilities include: * Conducting QC Microbiology testing on finished drug products. * Supporting the QC Scientist’s on microbiology testing. * Maintaining the microbiology laboratory. * Maintaining stock levels and preparation of logbooks. * Maintenance of lab equipment to include but not exclusively: Switching on VLF Class II cabinet Boiling water / bead baths, Media preparation (pH testing of media, autoclave waste & sterilisation of equipment). * Maintenance of weekly stock culture isolates. * Washing Micro Glassware and use of glass washer. * Conducting In-process sampling testing when required. * Collective Environmental...

We are looking for LGV 1 Trampers. ( £50 night out allowance ) Start times 05.00-08.00 Working for a well-established company, operating in the environmental services sector since We specialise in liquid waste disposal, emergency hazardous waste removal, and sewer cleaning services. As a new agency driver, you are an integral part of our team in maintaining our high standards of service and safety. Clean Water Tanker (12-Hour Shifts & Tramping) Job Purpose To safely transport and deliver potable (clean) water across regional and national locations while working 12-hour shifts and tramping away from home when required. Clean Water Tanker (12-Hour Shifts & Tramping) The role involves operating an HGV Class 1 (Category C+E) articulated clean water tanker, maintaining the highest standards of road safety, customer service, and potable water hygiene. Key Responsibilities * Safely operate an HGV Class 1 (Category C+E) clean water tanker in accordance with road traffic...

Mechanical Assembly Technician Monday-Friday 8am-4pm (37.5 weekly hours) Pay Rate £21 per hour Overview We are currently looking for a skilled Mechanical Assembly Technicians to support the assembly, build and testing of factory automation equipment, motor pump sets and manifold assemblies. The role would suit someone with strong mechanical assembly experience, the ability to read engineering drawings and a good eye for quality, safety and accuracy. You will play a key role in supporting production by assembling components to specification, completing relevant documentation and helping ensure work is completed to customer, quality and delivery requirements. Mechanical Assembly Technician Key Responsibilities Build and assemble factory automation assemblies, including TS2, VF, LT and EDC assemblies, using correct assembly methods and tooling.  Read and interpret engineering drawings, part lists and electrical circuit drawings to ensure assemblies meet customer specifications...

Assembly Operative Hungerford £14.00 per hour Due to continued growth, our client based in Hungerford is looking for an experienced Assembly Operative to join their production team. This is an exciting opportunity to develop your skills within a leading manufacturing environment. Assembly Operative Roles and Responsibilities: * Cutting and trimming carbon composite materials * De-moulding composite components * Finishing and preparing products to a high standard * Working from engineering drawings and work instructions * Using hand tools and equipment safely and effectively * Carrying out quality checks to ensure products meet required standards * Maintaining a clean and organised work area * Following all health and safety procedures Assembly Operative Ideal Candidate: * Previous hands-on experience in an assembly, manufacturing, or production environment * Ability to read and follow engineering drawings and written work instructions * Good attention to...

Site Engineer Wiltshire Civil Engineering We’re working with an established contractor to recruit a Site Engineer to work on a live highways scheme in Wiltshire. The project is upwards of £20m and comprises of heavy civils work to widen an existing busy a-road. Requiements: * Setting out and surveying (Total Station & GPS) * Produce as built drawings in AutoCAD * Support with Quality control, Quality Assurance paperwork * Work with a Senior Engineer to support site hand over documents The contractor works across the South West and South East supporting major projects and delivering projects directly for local authorities, National Highways as well as the private sector. Please feel free to get in touch with any questions about the project or job role

Electronic Rework Technician This role will be working Monday to Friday - 9am – 5pm Temporary Devizes Permanent Competitive Salary Our client is currently looking to employ an experienced re-work technician to assist with the repair and upgrade of printed circuit cards. Candidates must have experience in both surface mount and through hole technologies and be willing to learn additional skills in fault finding and diagnosis of failures for electronic modules. There may be a requirement to assist with moving and shipping products internally from time to time and to assist with packaging products once ready for despatch. Ideally candidates will have a hobby interest in electronics and will have some experience of building simple circuits. The role will be for a period of three months initially with the likelihood of becoming a permanent role with the possibility of further technical career progression for the right candidate. By applying for this role you give permission...

QC Microbiology Technician - Swindon Opportunity: This is a brand new position that has been created due to expansion. My client is a global pharmaceutical manufacturing company are looking to recruit an experienced Microbiologist where you will be carrying out high volume microbiology testing on finished drug products. Duties and responsibilities include: * Conducting QC Microbiology testing on finished drug products. * Supporting the QC Scientist’s on microbiology testing. * Maintaining the microbiology laboratory. * Maintaining stock levels and preparation of logbooks. * Maintenance of lab equipment to include but not exclusively: Switching on VLF Class II cabinet Boiling water / bead baths, Media preparation (pH testing of media, autoclave waste & sterilisation of equipment). * Maintenance of weekly stock culture isolates. * Washing Micro Glassware and use of glass washer. * Conducting In-process sampling testing when required. * Collective Environmental...

My client is looking for ongoing Assembly staff, with good hand dexterity and attention to detail for immediate start. The ideal candidate would have experience but not essential as full training will be given You would be working on a three week shift pattern:- 06.00-14.00 Monday to Thursday 06.00-12.00 Friday, 14.00-22.00 Monday to Thursday, 12.00-18.00 on Friday 22.00-06.00 Monday to Thursday and 18.00-00.00 on Friday. This is an ongoing position that could lead to full time permanent work. There is a canteen serving hot/Cold food. Large Car Park The salary is £15.34 hour on a three-shift rotation pattern. There is also an opportunity to earn a bonus once trained. Weekly paid

Mechanical Design Engineer (SolidWorks) – Immediate Start Available Our client, a leading engineering business, is looking for an experienced Mechanical Design Engineer with strong SolidWorks skills to join their team as soon as possible. This is an excellent opportunity for a proactive Mechanical Design Engineer who enjoys taking ownership of projects and delivering high-quality design solutions within challenging timescales. Key Requirements for the Mechanical Design Engineer: * Proven and strong experience using SolidWorks for mechanical design. * Background in Aerospace, Automation, Agricultural Engineering, or a similar industry. * Mechanical/Design/Engineering degree/qualifications or similar. * Strong understanding of mechanical engineering and manufacturing processes. * Ability to manage multiple tasks and consistently meet project deadlines. * Self-motivated, proactive, and capable of working independently and within a team. The Role of the Mechanical Design...

Our client, a global leader in manufacturing, are recruiting a skilled Toolmaker for their Tool Room & Manual Machining team. This 12-month contract, and offers the opportunity to work with state-of-the‑art equipment, supporting production and mould operations. What You’ll Do * Maintain and repair injection mould tooling and production fixtures * Manufacture precision components and fit high-quality parts to tight tolerances * Operate and set up Manual machines, CNC mills, lathes, grinders, and related equipment * Inspect parts using precision tools and follow various ISO standards * Support preventative maintenance and collaborate with production teams What You’ll Bring * Experience in a tool room, mould shop, or engineering workshop * Experience as a Toolmaker, Manual Machinist or Jigs & Fixtures Technician * An understanding of both manual and CNC machining would be beneficial, along with high-tolerance manufacturing skills * Strong...

General Worker (Mechanical) Location: Culham, Abingdon (Full-Time On Site) Rate: Up to £35.00 per hour Umbrella Contract: Until August 2027 Security Clearance: BPSS Required The Role We're looking for a hands-on General Worker with a mechanical or industrial background to support mechanical technicians and fitters on a long-term engineering programme. This role involves assisting with maintenance, installation, assembly and modification work, while ensuring high standards of health, safety and quality are maintained throughout. Key Responsibilities Support mechanical technicians and fitters with maintenance and installation activities. Carry out general mechanical assembly and construction tasks. Move, store and maintain tools, equipment and materials. Keep work areas clean, organised and safe. Assist with documentation and maintenance records. Work to safe systems of work and method statements. Liaise with other teams to complete tasks efficiently. Requirements...

Looking for a good all-round mechanical design engineer, skilled on either SolidEdge or SolidWorks . Enclosuers, cabinets/boxes around electronics, brackets machines parts...basically light metal work that houses systems. Ideal candidate will come from Medical or Electronics enclosures or consumer products..NOT Heavy industry

Mechanical Technician Location: Culham Contract Length: 12 Months Working Pattern: Full-time onsite IR35 Status: Inside IR35 Security Clearance: BPSS required Role Overview We are seeking an experienced Mechanical Technician to support shutdown, maintenance and installation activities within a highly regulated engineering environment. The primary focus of the role will be supporting a specialist mechanical assembly team during planned shutdown periods, including preparation and execution activities. In addition, the successful candidate will provide broader mechanical support across plant systems as required. The role involves working on a variety of sophisticated mechanical systems including: * Vacuum systems * Cooling systems * Pressurised systems * Electro-magnetic systems Responsibilities will include installation, maintenance, fault finding, repair and modification of both existing and new systems. As a Mechanical Technician, you will also be expected to...

CNC Milling Machine Operator / Setter XYZ SMX 4(Apply online only) Milling Machine – ProtoTRAK / ProTRAK Controller Monday-Friday 8am-4pm (37.5 weekly hours) Pay Rate £16.50-£18.50 DOE per hour CNC Milling Machine Operator / Setter The Role Our client is a well-established engineering manufacturer looking to recruit an experienced CNC Milling Machine Operator / Setter to join their production team. The successful candidate will be responsible for setting and operating the machine, loading materials and tooling, adjusting offsets and producing high-quality components to engineering specifications. Please note: this is not a programming role. The role is focused on machine setting, operating, and machining components accurately. CNC Milling Machine Operator / Setter Key Responsibilities Set and operate an XYZ SMX 4(Apply online only) milling machine. Use a ProtoTRAK / ProTRAK controller as part of day-to-day machine operation. Load and secure materials, tooling and...

Contract FPGA Engineer required to carry out one of two interesting firmware projects for this company in Didcot.  Skills in order of importance for the Contract FPGA Engineer: FPGA programming in Verilog or VHDL SoC programming to test the FPGA Signal processing and an understanding of DSP mathematics Telecoms/ 5G/ LTE Software defined radioPlease apply or call me to find out more