40 education jobs found in Tamworth

TXM are currently recruiting for 4 x Raft Fitters based in Barton, Burton upon Trent on a contract basis. Location: Barton, Burton upon Trent Hours: 44 hours per week (Mon-Thurs 7am – 5pm and Fri 7am – 1pm) Hourly rate: £Competitive Key Responsibilities Responsible for ensuring your own health and safety and that of others and promoting a positive health and safety culture within the workplace Ensure all Health and safety obligations are met, and company policies are adhered to Report any safety concerns, hazard observations, accidents and incidents by the end of that shift to allow full investigation and prevent re-occurrence Ensure activities and associated actions and measures taken do not endanger but assist with the upkeep and maintaining the company’s ISO (9001, 14001 and 45001) standards and certification To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. Previous engine knowledge...

Job Title: Parts Cleaner Location: Burton-on-Trent, Staffordshire ( Barton Under Needwood) Duration: Min 3 months Days: Monday to Thursday 7:00am to 4.00pm and 7.00am to 1.00pm Fridays We are currently recruiting for a Parts Cleaner for an ongoing contract based in the Burton-on-Trent area for an engineering client. Candidates must have own transport due to site location. The role of the Parts Cleaner/Inspector is to ensure that all parts are cleaned, inspected and sorted for refurbishment, re-use or disposal. Also, to ensure parts are processed in a safe manner, to the correct standard and accordance with the production schedule. Key Duties & Responsibilities: * General cleaning and preparation of engine, transmission and raft parts using manual tools, dual acting sander (DA) scrapers, etc. * Load / unload parts into cleaning machines. * Follow the relevant working instructions / process plans etc. * Inspect for signs of damage/wear. * Disassemble parts for re-use/deep...

Test Engineer Coventry 12 Month   The Opportunity Working with a large known Automotive Company.They are seeking a proactive and detail-oriented Test Engineer to join our Test Operations team. This is a critical role responsible for the end-to-end management of Bills of Materials (BoM) for Units Under Test (UUT) across our cutting-edge Battery, EDU, and Engine Test environments.   You will be the central pivot point between Engineering, Procurement, and Test Operations, ensuring that every kit is complete, accurate, and delivered exactly when needed to keep our test schedules on track.   Key Responsibilities BoM Ownership: Manage and own the Bill of Materials for UUTs, ensuring 100% accuracy for all scheduled test activities. Coordinate the ordering, tracking, and expediting of components through internal systems and external suppliers to meet high-pressure deadlines. Work closely with Engineering Design and Test Operations to translate technical requirements into actionable...

Position: (phone number removed) Suspension Engineer Location: Gaydon Position Type: Contract Inside IR35 Salary: £27.71 per hour umbrella inside IR35 I am currently recruiting on behalf of a Luxury Automotive OEM based in Gaydon who are seeking a Suspension engineer to join their team on a long term rolling contract 40 hours per week Inside IR35 Duties: Apply engineering theories and principles to perform complex work in research and development of suspension engineering systems, including the design, characterization, and iterative refinement of suspension devices. Work within an Agile Squad to develop industrialized products. Deliver the commodity plan to quality, cost and time, including maintaining the Worldwide Engineering Release System Assist in the Management of Change Requests, expenditure forecasting and the relevant supplier teams in support of delivery of the programme milestones Meet programme targets for cost and weight Legal regulations and Requirements...

Our premium brand Automotive client is currently recruiting for the following role: NVH Modal test engineer - £27.21/hr (Inside IR35) Warwickshire 8 Months (potential for yearly renewal) Duties: Measurement, analysis and reporting of vehicle, system and component modal performance status to meet key gateway requirements. Responsible for lab-based transfer function measurement to support NVH attribute needs and NVH issue investigation, i.e. Transfer Path Analysis to support road, powertrain and simulator teams - Undertake detailed correlation work in collaboration with CAE teams both internal and external to improve future models and simulations. - Maintain the Modal lab workspace and ensure it is fit for use, and calibration compliant - Support taskforce activities to solve complex engineering problems as required - Maintain up to date method statements and processes for modal and systems testing Skills: - Experience within a modal testing environment and setup and use of...

Our OEM Client based in Gaydon, is searching for a NVH Modal Test Engineer to join their team on an Inside IR35 contract. Umbrella Pay Rate: £27.03 per hour. Roles and responsibilities: Measurement, analysis and reporting of vehicle, system and component modal performance status to meet key gateway requirements. Responsible for lab-based transfer function measurement to support NVH attribute needs and NVH issue investigation, i.e. Transfer Path Analysis to support road, powertrain and simulator Teams. Undertake detailed correlation work in collaboration with CAE Teams both Internal and External to improve future models and simulations. Maintain the Gaydon Modal Lab Workspace and ensure it is fit for use and calibration compliant. Support taskforce activities to solve complex engineering problems as required. Maintain up-to-date method statements and processes for modal and systems testing. Skills Required: Experience within a modal testing environment and setup and use of...

Job Title: Grinder Location: Barton Under Needwood Hourly rate: Competitive Shifts: 07.00am – 16.00pm Monday – Thursday. 07.00am – 1pm Fridays. Duration: On-going contract Job Description: TXM Recruit are actively recruiting for a Grinder to work within the production team to support the overhaul, manufacture, and maintenance of locomotive components, contributing to the delivery of the weekly production plan. This is a hands-on mechanical role, requiring precision, attention to detail, and a strong focus on quality and safety. Job Duties: * Operate grinding machines (surface, cylindrical, bench, angle grinders) * Smooth, sharpen, or polish metal or other materials * Remove excess material, burrs, or welds * Measure parts to ensure accuracy and quality standards * Inspect finished pieces for defects * Perform basic machine maintenance and cleaning * Follow safety procedures and wear protective equipment * Read blueprints or work orders Qualifications...

Job Title: Electrical Fitter Location: Doncaster / Barton Under Needwood Hourly rate: Competitive Duration: On-going contract / Temp to Permanent Shifts: Days (Mon-Thu 0600 – 1410/Fri 0600 – 1150/37.5 Hrs per week. We currently require a number of Electrical Fitters / HVAC Fitters on a temporary to Permanent basis to work for a leading company in the HVAC sector. Based out of their facility in Burton on Trent, the role will be carrying out Electrical Repair and basic testing on HVAC units from the transport industry, Using hand tools, following work instructions and Technical drawings. Suitable candidates will hold a level 3 or equivalent qualification and will be provided with 10-12 weeks training at their facility in Doncaster (Mileage paid), as well as F-Gas & Brazing training, therefor no prior HVAC experience is needed. Any successful applicants would be required to pass a medical D&A prior to any start

Job Title: CNC Technician Location: Barton Under Needwood Hourly Rate: Competitive Shifts: 07.00am – 16.00pm Monday – Thursday. 07.00am – 1pm Fridays. Duration: On-going contract Job Description: TXM Recruit are actively recruiting for a CNC Technician to work within the production team to support the overhaul, manufacture, and maintenance of locomotive components, contributing to the delivery of the weekly production plan. This is a hands-on mechanical role, requiring precision, attention to detail, and a strong focus on quality and safety. Job Duties: Maintain high-quality machined products in line with daily production KPIs. Carry out maintenance, overhaul, strip-downs, rebuilds, and new builds of locomotive components. Set and operate manual and CNC vertical borers and CNC lathes. Work to tight tolerances using precision measuring equipment. Read and interpret technical and orthographical drawings and specifications. Ensure all measuring equipment remains in...

Job Title: 6G TIG Welder Location: Walsall, West Midlands Duration: Ongoing Contract or Permanent (Optional) We are currently recruiting for TIG welders who have experience in welding tubular pressure parts to X-Ray standard. The daily duties will include (but are not limited to): * Coded welding. * 6G Welding position. * Welding of stainless and carbon steel tubes and plates. * Positional welding on pressure vessels, pressure parts and superheater pipework. The Ideal Candidate: * Will have a minimum of 2 years of relevant experience. * Be confident with 6G TIG welding. * Previous qualifications/coding's. * Weld trade test will be required which will be x-rayed. * Will be able for his butt welds to pass X-ray. DPI and MPI. Working Hours (Optional): * Days - 08:00 to 16:30 (Monday to Friday) * Nights - 17:30 to 03:30 (Monday to Thursday) Overtime: * Weekday x1.3 * Saturday x1.5 * Sunday x2 Pay Rates: * Days - £25.00 (UMB) or £19.07 (PAYE) * Nights - £30.00 (UMB) or £22.88...

Job Title: Mechanical Fitter (Raft Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 4pm Monday to Thursday and 7am till 1pm on a Friday Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters for an ongoing contract. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters with Hydraulic experience Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair hydraulic systems. To be able to fault find and carry out diagnostic investigation work. Previous engine knowledge would be advantageous. To overhaul of raft components. To be able to understand schematic drawings. To undertake training as and when required. To work within a realistic timeframe. To mentor trainees / apprentices when applicable. To ensure that waste is disposed of in the...

Job Title: Gear Grinder Location: Burton-on-Trent, Staffordshire Duration: 6 months contract (min) Pay Rate: DOE Hours: 7am-4pm Monday to Thursday., 7am -1pm Friday Our Engineering client based in Barton Under Needwood is looking for an experienced Gear Grinder (Previous experience of Reishauer, Niles, and Pfauter gear grinding machines would be advantageous) Role: The role of the Gear Grinder is grind gear teeth to drawing specification. Key Responsibilities & Activities: * Use of a wide range of measuring equipment to check components. * Writing and interpreting instructions and procedures to assemble equipment and products accurately. * Obtaining relevant information from the relevant sources * Controlling machines and processes. * Performing inspections of equipment, structures, materials, and products. * Analysing information and finding the best solutions to problems. * Maintaining clear and honest communication at all times. * Keeping the work environment...

Job Title: Machinist Location: Barton-under-Needwood, Staffordshire Duration: Ongoing Contract/ or perm Hours: 7am -4pm Mon to Thurs, 7am -1pm Fri. Own transport recommended due to location We are currently recruiting for an experienced Machinists for an ongoing contract based in Barton-under-Needwood, Staffordshire. Relevant experience required: * Machine shop covering engine component overhaul / refurbishment * Tool room machinist * Machine shop: one off low volume machining and qualifications of used components 1> Milling on Rottler machines, which involves refurbing old parts and not production. 2>Candidates must have a background working from a " tool shop/ tool room" environment and must have experience inspecting, used measuring tools such as verniers, calipers and mircometers . 3>Must be able to use CNC Controls. Key Duties & Responsibilities: * Machine blocks and casings for Voith and NT blocks. * Be able to use Rottler and Milling Machine. * Be...

Job Title: Stores Operative with FLT Licence Location: Barton Under Needwood Duration: 6 Months Hours: Mon - Thurs 8am to 430pm, 8am -1pm Friday Our engineering client based in Barton Under Needwood are recruiting for an experience Stores Operative for initially 6 months. Must have valid in date licenses for Reach Truck & Counterbalance Truck Must be computer literate Own transport highly recommended due to site location. VNA Essential Must be conversant with PI (Physical Inventory ) and Cycle checks RF Scanner experience essential The role: The role entails dealing with products that come into stores. Daily tasks would include, checking for damaged or missing parts. Moving stock around by hand or using forklift truck, selecting orders and keeping paperwork up to date on the computerised system Oracle. Booking goods in / out and despatching parts to customers. Responsibilities: * Stock records, reported accurately in respect of quantity and location * Stock located,...

Job Title: Parts Kitter Location: Burton-on-Trent, Staffordshire ( Barton Under Needwood) Duration: 3+ months' Hours: Monday to Thursday - 07:00 to 16.00,Fri 07:00 to 13:00 Own transport is advised due to location Our Engineering client based in Barton Under Needwood are recruiting for a Parts Kitter ( ideally with a mechanical background) The role of the Parts Kitter gathers and prepares mechanical components and materials based on work orders or kits for assembly or manufacturing processes. This ensures that all necessary parts are ready and available for technicians or assemblers to use. Key Duties & Responsibilities: Read and interpret work orders, bills of materials (BOMs), and pick lists. Pull parts from inventory according to specifications. Verify part numbers, quantities, and quality. Label and package components into kits. Track inventory usage and report shortages. Maintain a clean and organised work area. Communicate with warehouse, inventory, or...

Job Title: Parts Kitter Location: Barton Under Needwood, Burton-on-Trent, Staffordshire Duration: Minimum 6 month contract (potential for extension / permanent) Hours: Monday to Thursday - 07:00 to 16:00, Friday - 07:00 to 13:00 (40 hours paid) Rate: Dependent on experience Start Date: Immediate Own transport is recommended due to site location. We are currently recruiting for two Parts Kitters to join a well-established engineering client based in Barton Under Needwood. This is a great opportunity for individuals with a mechanical background looking to support production teams in a busy manufacturing environment. Role Overview: As a Parts Kitter, you will be responsible for gathering and preparing mechanical parts and materials in line with work orders and build specifications. You will ensure that all kits are complete, accurate, and ready for use by technicians or assembly teams. Key Responsibilities: Read and interpret work orders, bills of materials (BOMs), and pick...

Job title: Raft Fitter - (mechanical Fitter) Job location: Near Burton upon Trent Shifts: Days only. Hours per week: 40. Hours: 7am to 4pm Monday to Thursday, 7am to 1pm on Friday. Duration: 6 month contract, highly likely to extend, possible temp to perm. Start date: immediate. Client Summary: Leading manufacturer and front line supplier of powertrain products based in the UK and Ireland. Areas of expertise include Engine Overhaul, final Drive Overhaul and locomotive refurbishment. Position Summary: Stripping Rafts / building transmissions within the Rail industry. You will be working in teams to breakdown mechanical systems on to locomotive rafts and rebuild. Roles can include: * Engine strip down or strip down of components and rebuild. * Fitting newly re-furbished engines back onto the rafts including all components that service that service and help the running of the engine, radiators, pumps, tanks, pipe work, electrical looms and more. * To have a good...

Job title: Raft Fitter - (mechanical Fitter) Job location: Near Burton upon Trent Shifts: Days only. Hours per week: 40. Hours: 7am to 4pm Monday to Thursday, 7am to 1pm on Friday. Duration: 6 month contract, highly likely to extend, possible temp to perm. Start date: immediate. Client Summary: Leading manufacturer and front line supplier of powertrain products based in the UK and Ireland. Areas of expertise include Engine Overhaul, final Drive Overhaul and locomotive refurbishment. Position Summary: Stripping Rafts / building transmissions within the Rail industry. You will be working in teams to breakdown mechanical systems on to locomotive rafts and rebuild. Roles can include: * Engine strip down or strip down of components and rebuild. * Fitting newly re-furbished engines back onto the rafts including all components that service that service and help the running of the engine, radiators, pumps, tanks, pipe work, electrical looms and more. * To have a good...

Job Advert: SISS Supervisors (Station Information and Security Systems) Rail Location: Birmingham Rate: £310/day Ltd Out of scope 6 month contract initially – long term project ·Are you a technical leader passionate about safety, seamless passenger journeys, and cutting-edge systems? ·Do you want to be at the heart of a bustling rail station's operational nerve centre? Our client, is a leading company in the UK rail industry, committed to delivering safe, reliable, and customer-focused travel. They are seeking dedicated Station Information and Security Systems Supervisors to join our dynamic station management team. This is a pivotal role where you will be the technical expert and team leader responsible for the critical systems that keep passengers informed, safe, and secure. What We're Looking For (Essential): ·Proven experience in a technically supervisory role, preferably within the rail industry ·Strong hands-on technical knowledge of low-voltage electronic systems...

Job Title: Contract Design Engineer Location: Coventry, UK Core Hours: 08:00-16:35 (Mon–Thu) 08:00-15:10 (Fri). Vacancy Type: Full-time, Contract and onsite Salary: £275 - £350 per day (subject to experience) About the role Hit the ground running. Design to protect lives. We’re looking for a number of experienced Contract Design Engineers to support our high-impact vehicle integration and protection projects at NP Aerospace. You’ll bring proven manufacturing experience and deep Creo 9.0 or higher skills, ready to deliver from day one in a fast-paced engineering environment. This is a hands-on, delivery-focused role working within a specialist team that designs, develops and integrates mission-critical systems into vehicles for global defence customers. This role is restricted to UK Nationals only and is designated as ‘UK Eyes Only’. Due to the nature of our work and security requirements, applicants must hold sole UK nationality to be eligible. ​ What you’ll be doing ​ You’ll lead...