794 jobs found in Tarporley

Our client, a prominent player in the nuclear industry, is currently seeking a highly skilled Senior Process Engineer to join their team on a contract basis. This role will involve working on a significant project for Urenco, based in the North West. The successful candidate will be expected to work autonomously, offering their expert process engineering skills without significant support from an internal team. This contract is anticipated to last approximately 18 months. Key Responsibilities: Completing process design independently and efficiently Ensuring adherence to project specifications and regulatory requirements Collaborating with cross-functional teams and external stakeholders Attending site visits and office meetings as required Providing expert input on nuclear process engineering projects Delivering high-quality technical documentation and reports Maintaining high standards of safety and compliance throughout the project lifecycle Job Requirements: Significant...

Senior Highway Engineer Location: Crewe, Cheshire Rate: £45 - £50 p/hour Contract: Initial 6 Months Working Pattern: Hybrid Hours: 40 Per Week IR35 Status: Inside IR35 An exciting opportunity has arisen for an experienced Senior Highway Engineer to join a well-established highways team delivering a range of highway improvement and active travel schemes across Cheshire East. This role would suit a technically strong highways professional with significant experience in highway design and the ability to provide expert interpretation of design standards, whilst supporting the successful delivery of projects from conception through to completion. The Role As a Senior Highway Engineer, you will play a key role in managing the technical delivery of projects, providing guidance to engineers and technicians, and acting as a senior point of contact for clients and stakeholders. You will be responsible for reviewing designs, advising on technical matters, allocating work across the...

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

We’re Hiring: Time Served Fabricators – Winsford 🚨 Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Fabricators. 🔧 The Role As a Fabricator, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate materials * Ability to work independently from...

We’re Hiring: Time Served Platers – Winsford 🚨 Please note: this is a local role only as accommodation is not provided Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Platers. 🔧 The Role As a Plater, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate...

Ambitek is recruiting for Skilled Structural MIG Welders to join our client's team in Winsford. This is a fantastic opportunity for experienced professionals looking for long-term work. Key Responsibilities: ✅ MIG welding of structural beams and end-plates ✅ Perform solid wire MIG welding in the down-hand position ✅ Complete a 10mm T-joint multi-run fillet weld to a high standard ✅ Ensure all welds meet the required quality and safety standards Requirements: ✔️ Proven experience in structural MIG welding ✔️ Ability to perform a 10mm T-joint multi-run fillet weld ✔️ Ability to pass a trades test before starting 📌 CIS or Umbrella only 💰 Rate: £19.85/hour (basic) | £27.03/hour (overtime after 39 hours) 🕒 Hours: * Mon – Thurs: 07:45 AM – 16:45 PM * Fri: 07:45 AM – 12:45 PM ⚠️ Local candidates only – Accommodation is not provided 🚀 Immediate starts available upon successful completion of the trade test. Apply now

Ambitek is recruiting experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long‑term contracting opportunity offering strong rates, steady hours, and ongoing work for reliable, qualified welders. 🔧 Key Responsibilities * MIG welding of structural steel beams, end‑plates, and associated components. * Using solid wire MIG in the down‑hand position. * Completing 10mm T‑joint multi‑run fillet welds, including controlled start/stop techniques. * Working accurately from engineering drawings and welding specifications. * Ensuring all welds meet required quality, safety, and compliance standards. 🧰 Requirements * Proven experience in structural MIG welding, ideally within a fabrication workshop environment. * Ability to produce a high‑standard 10mm multi‑run T‑joint fillet weld. * Must successfully pass a trade test prior to starting. * Strong attention...

We’re Hiring: Time Served Fabricators – Winsford 🚨 Ambitek is proud to be recruiting on behalf of our client in Winsford, who are looking to expand their team with a number of skilled Time Served Fabricators. 🔧 The Role As a Fabricator, you’ll be working with 20mm – 40mm thick plate in a structural steel environment. From interpreting technical drawings to producing high-quality components, you’ll play a key role in ensuring production standards are met and exceeded. 📌 Key Responsibilities: * Fabricating components from 20mm – 40mm plate * Reading and interpreting technical drawings * Using a variety of tools and equipment in a structural steel setting * Delivering work to a consistently high standard within given timeframes ✅ What We’re Looking For: * Time Served with a solid background in structural steel fabrication * Proven experience working with thick plate materials * Ability to work independently from...

Electricians Needed | 2-3 Months Work | Immediate Starts Available. Shorterm Group are looking for Electricians to start on The Energy From Waste Plant in Northwich. The duration is likely to be 2-3 months and minimum 45 hrs per week with the potential for more (Weekends). Immediate starts. The rates for this role will be as follows based on a CIS basis. Mon-Fri(1st 39hrs) £26.00 Mon-Fri(over 39hrs) £32.50 Sat(1st 4hrs) £32.50 Sat(over 4hrs) £39.00 Sun(all hrs) £39.00 There is also Night Shifts available on this site (£35.10 All hrs) JIB card/proof of trade required and ideally experience within an industrial environment would be great

General Services Manager - Broughton, Chester Contract £30.23 per hour PAYE £40.00 per hour UmbrellaCarbon60 is seeking a highly skilled and experienced General Services Manager to join their team. In this pivotal role, you will be responsible for supporting the management of the company's general (soft) services, ensuring compliance, efficient service delivery, and adherence to site requirements. As the General Services Manager, you will be tasked with overseeing a diverse range of operational services, including graphics and multimedia administration, catering services and restaurants, cleaning services, waste management, grounds management, transportation services, and mailroom services. You will work closely with internal and external partners to improve service delivery, ensuring everything is delivered on time, to the highest quality, and within budget. To be successful in this role, you will need to have a strong understanding of facility management or previous...

Position: Plater / Welder Location: Chester Start Date: Immediate Hours: 10-12 hour Day shifts Duration: 1 week PAYE Pay Rates: Mon-Fri, All Hrs: £24.00/hr Including Holiday Pay Sat-Sun, All Hrs: £32.00/hr Lodge / Travel Allowance: £55.00/day The Role: Our client has a requirement for Plater / Welders for an EFW power station shutdown near Chester. Duties will include plating, fabrication, MIG and MMA welding on structural steel plate, channels, and brackets as well as assisting mechanical trades with general maintenance. Essential Requirements: - CCNSG card - Confined Space Entry certificate - Manual Handling, Working at Height, Abrasive Wheels, Slinging certificates an advantage - Experience of plating, MIG and MMA welding on large industrial sites (cement, power, refinery, steel) About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction sector. Our specialist recruitment activities range across all...

Instrument Pipefitters required for approximately 3 months work. at Lostock Rates as below Normal: 26 OT 1: 32.50 OT2: 39 45 hours a week (overtime after 39 hrs) – possible weekends Lodge payable if needed

Our client is looking to recruit an experienced Multi Skilled Engineer to cover a wide range of mechanical, electrical equipment and machinery in a recycling environment, the ideal candidate will have the ability to utilise a logical approach to solve any problems that may arise. This is a temporary role, with the potential to become permanent for the successful candidates. Core duties will included carrying out routine maintenance on, Conveyors, Electronic Control Panels, Power Transmission Equipment (motors gearbox bearings) Air Density & Eddy Current Separators, Feed Hoppers. Basic welding skills and experience in MIG and TIG would be an advantage. Personnel specification: * 5 years or more experience of plant fitting and maintenance in an industrial environment * Have an excellent understanding and commitment to safe working practises. * Must have or be willing to receive training to operate Telehandler and MEWP equipment * Good communication * Good knowledge of...

Electrical Design Checkers/Engineers - Aerospace Projects Delegate Signatory / Delegation of Authority Location: Runcorn, Cheshire - Hybrid Working Contract Type: Inside IR35 Join the team shaping the future of Airframe! We're seeking Electrical Design Engineers to work on cutting-edge projects. What You'll Do: Design electrical wiring using Catia V5 and NX 3D modelling & CAD installation analysis of looms/harnesses CATIA Work Bench Cable routing, draughting & BoM compilation Circuit design with fusing & protection strategiesToolsets: Catia V5, NX, Teamcenter What We're Looking For: Aerospace experience preferred Strong electrical design & CAD expertise Detail-driven, collaborative mindset Why Apply? Work on next-gen aircraft programs Flexible hybrid model Be part of a world-class engineering team Apply via the link and help shape the future of flight! This vacancy is being advertised by Belcan

Quality Engineer - Nuclear Enrichment Facility (North West) Rate: £60-£65 per hour (Umbrella PAYE) Working Pattern: 3 days on-site / 2 days remote Start: ASAP (subject to security clearances) Contract: Long-term / ongoing Overview An exciting opportunity has arisen for an experienced Quality Engineer to join a major Nuclear Enrichment Facility in the North West. This role is ideal for candidates with a strong background in nuclear, defence, or other highly regulated environments, who can support quality assurance and continuous improvement activities on a critical national infrastructure programme. Key Responsibilities Support quality assurance activities across engineering, manufacturing, and project delivery teams. Conduct audits, inspections, and surveillance activities in line with nuclear and regulatory requirements. Ensure compliance with internal quality standards, industry codes, and statutory regulations. Lead and contribute to root cause analysis, NCR...

Skilled Pharmaceutical Operative Aseptic Processing Speke Liverpool Six Month Contract Aseptic and Cleanroom Experience Essential We are currently recruiting for a Skilled Pharmaceutical Operative to join a leading manufacturing organisation in Speke, Liverpool. This is a fantastic opportunity to work on the production of viral seed stocks that support the influenza vaccine manufacturing process and contribute to work that has a direct impact on global health. This role requires candidates with proven hands on experience working in a strictly controlled aseptic and cleanroom environment. Applicants without this experience will not be considered. About the Role As a key member of the manufacturing team, you will carry out a wide range of production activities in a highly regulated setting. You will play a critical role in ensuring all work is carried out to the highest standards of quality, compliance, and safety. Key Responsibilities Work strictly in line with all...

DCS Recruitment currently seek an experienced data cabling engineer in Wrexham on behalf of a national structured cabling contractor. Vacancies: 2 Established data cabling teams and individual cabling engineers are equally encouraged to get in touch. Working 8 hour day shifts, M-F. The ideal candidate will: Hold a valid ECS/Equivalent structured cabling/datacomms industry related card or CSCS Be able to provide relevant work references and proof of right to work in the UK (ID) prior to start Have their own PPE and hand tools including termination kit and drill(s)If an IPAF licence is held, this is beneficial though not essential. Call Melanie on (phone number removed) (option 2) or apply online to receive a call back. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation,...

QS Mechanical (Piping) - £450/day Outside IR35 Location: Point of Ayr, North Wales Contract Length: 12 Months ARM is recruiting for an experienced QS Mechanical professional to support a major energy sector project in North Wales. Key Responsibilities Maintain and update project Bills of Quantities and quantity records. Update project management databases with construction progress data. Support the preparation and verification of extra works, NPs, and CWOs. Ensure quantity and cost data complies with project procedures and subcontract requirements. Assist with quantity reporting and cost forecasting. Monitor subcontractor manhours, equipment usage, and installed quantities. Support the administration and settlement of subcontractor and client claims. Coordinate spooling, welding, and material traceability systems. Requirements Minimum 10 years' experience as a Mechanical Quantity Surveyor. Strong piping experience within energy, oil & gas, petrochemical, or industrial...

Fabricator Welder  £16.00 - £18.00 per hour  Monday to Friday Days  Wrexham  Temporary with Permanent opportunities The role of Fabricator Welder  We are currently recruiting for a skilled Fabricator Welder to join a well-established Engineering client based in Wrexham. This company specialises in producing high-quality products and offers installation of their products on site.  Responsibilities of the Fabricator Welder MIG Welding.  Fabrication.  Working within the Fab Shop and on-site installations.   Working to strict health and safety standards.  Carrying out work to a high standard.  The Candidate The successfully appointed Fabricator Welder will have the following skills and abilities: CSCS or CCNSG - Desirable  IPAF, Telehandler - Desirable  Relevant Welding Qualifications.  Friendly Note: If this job is not for you, but you are looking for a new opportunity, please contact us for a confidential discussion on your career. Additional skills and job titles: MIG...

Pipe fitter TIG Welder - Working Supervisor Wrexham, Flintshire, LL13 9RE 8 Months + Contract Position - Monday - Friday 7.30am - 5.30pm Excellent salary with a range of benefits. Our client is a trusted engineering partner delivering high quality mechanical, electrical and process engineering solutions across the UK. With a strong reputation for technical excellence, safety and reliability, they support complex projects throughout the full life cycle - from design and installation through to maintenance and optimisation. Working with clients across industrial, manufacturing, food and beverage and energy sectors, the business combines hands on expertise with a collaborative, solutions focused approach. Joining the company means becoming part of a professional, forward thinking organisation that values its people, invests in development and takes pride in delivering engineering solutions that make a real impact. Duties We are seeking an experienced Pipe fitter TIG Welder -...