23 construction jobs found in Wakefield

Assembly Technician (multiple needed over the next 6months phasing!) Daily duties as Assembly Technician: * Practical experience with tools, machinery or similar assembly tasks * Ability to read technical drawings or willingness to learn * Familiarity with power tools, screwing machines (and crane/FLT operation is a bonus) * A detail-oriented, safety-conscious and team-focused attitude Hours: Mon-Wed: 07:00-17:00, Thus: 07:00-16:30, Optional overtime on Fridays maybe available(Time + ½) ARE YOU READY? Join one of the UK's leading independent engineering and services companies. This new site is ready to launch in the next few weeks! *Assembly Technician is a hands-on role offering long-term stability, skill development and clear progression opportunities *Excellent benefits and holiday package available when you transfer permanent. Key Responsibilities as Assembly Technician: You'll be involved in a wide range of practical tasks including: o Assembling components using hand...

Role: Electrical Design Engineer Location: Leeds (Hybrid working - but must be located commutable to Leeds) Pay: £45-£55 per hour - LTD Company/Outside IR35 (DOE) Duration: On-going minimum 12 months. Industry: Water/Wastewater Treatment (AMP8)   The business we are working with, a leading contractor covering the full range of MEICA services from design to installation and maintenance within the water industry are currently looking for an Electrical Design Engineer with water industry experience to complete their team in Yorkshire Water.   The successful Electrical Engineer will have the opportunity to contribute to projects relating to the Yorkshire Water complex Wastewater non-infrastructure framework for AMP8.   Please note experience with UK water experience on any UK water authority is essential.   Candidates can expect to work on a variety of upgrade schemes, averaging the £2m mark and up to £20m. Schemes include chemical dosing, Sludge tanks, green recovery and...

Quality Inspector 6-month contract (extension possibility) Based in Huddersfield £350 - £400 per day We are currently seeking an experienced Quality Inspector to join our team on an initial 6-month contract, based in Huddersfield. This is a hands-on, site-focused role. The position is ideally suited to a technically strong quality professional with a background in civil engineering or construction, rather than a supervisory or management-focused role. Candidates should have at least a couple of years' experience working as a Quality Engineer, Quality Inspector, or in a similar technical quality role. Responsibilities: Carrying out quality inspections across active project sites Inspecting works including concrete, steel works, and earthworks to ensure compliance with drawings, specifications, and relevant standards Reviewing and analysing technical drawings, specifications, and quality documentation Producing clear, accurate inspection reports, highlighting...

Dedicated to sustainable development, Arup is a collective of designers, consultants and experts working globally. At Arup you will have the opportunity to collaborate on ambitious projects - delivering remarkable outcomes for clients and communities, and to do socially useful work that has meaning. Arup's purpose, shared values and collaborative approach has set it apart for over 75 years, and now is your opportunity to join. Job description - the role AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. We partner with Arup to support their contingent recruitment processes. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On Behalf of Arup, we are...

Contract PSV Engineer “Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset?” Why work as a Venatu Contractor? * Wages paid weekly. * Roles inside and outside of IR35. * Local work wherever possible, as well as national opportunities, short and long-term contracts available. * Developing your skill set, training courses subject to meeting the criteria. * Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: * Carry out repair and maintenance to exceed DVSA standards. * Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. * Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. * Routine inspection and servicing to maintain roadworthiness and MOT standards. * Carry out major unit changes and repairs where applicable. * Complete necessary paperwork including service...

The Role Type: Contract (12 months +, likely to be ongoing) Day Rate: £55–£60 per hour Ltd (subject to an IR35 assessment confirming outside status) Hours: 40 hours per week Are you a Chartered Structural Design Engineer MISTRUCTE or MICE?  Do you have Water sector experience of any sort?  Do you live within commutable distance of Manchester?  The Opportunity We are looking for a Principal Structural Engineer (ideally chartered MISTRUCTE or MICE) to lead and deliver structural design solutions across water sector projects, specifically for water treatment plants for utility companies. Your duties and responsibilities will be  You will ensure design deliverables meet safety, quality, and industry standards, provide technical guidance, and mentor a team of engineers, CAD technicians, and graduates. You will work on projects under AMP8, including; Design of water retaining structures Foundations and structural works for water treatment equipment Retaining wall designs...

An opportunity has arisen for an experienced Site Agent to join a long-term bridge construction project in Manchester. This is a key site-based role on a major infrastructure scheme, offering an immediate start and a stable two-year contract. Role Overview: * Full responsibility for the day-to-day delivery of bridge construction works * Leading and coordinating site teams, engineers, and subcontractors * Driving programme performance while maintaining high quality and safety standards * Ensuring compliance with all HSEQ requirements and approved RAMS * Liaising closely with the Project Manager, client, and design teams * Managing site logistics, plant, materials, and sequencing of works * Proactively identifying and resolving technical and operational challenges Candidate Requirements: * Proven experience as a Site Agent on bridge or heavy civils projects * Strong technical knowledge of structures,...

An exciting opportunity has arisen for an experienced Highways NEC Project Manager to join a busy local authority client in the Manchester area. The main duties of the experienced Highways NEC Project Manager are: Manage highways construction projects under NEC contracts, ensuring delivery on time, within budget, and to council standards. Plan, monitor, and report on project progress, risks, and financial performance, using NEC contract procedures and best practice. Liaise with contractors, consultants, and internal stakeholders to resolve technical and contractual issues effectively. Ensure compliance with health & safety regulations, statutory requirements, and local authority policies. Lead on the preparation, evaluation, and management of NEC contract variations, compensation events, and claims. Provide technically accurate advice and support to senior management, residents, and councillors regarding project delivery. Maintain accurate project records, reports, and...

Principal EICA Engineer – Water Sector Manchester - Hybrid (2–3 days in office) Competitive rate - can be outside of scope of IR35 The role is working for a leading consultancy, delivering on their water treatment and utilities frameworks. This is a senior, hands-on engineering role with real influence - leading projects, shaping design, and setting technical direction across complex water sector schemes. The Role The Principal EICA Engineer will take ownership of EICA delivery across a portfolio of projects. From concept through commissioning, they will balance technical excellence with commercial reality. What You’ll Be Doing Producing cost-effective, compliant EICA design documentation Delivering outline and detailed electrical, instrumentation & control designs Leading site surveys, FATs, and producing clear technical reports Providing EC&I technical authority: preparation, checking, approval of documentation Managing sub-contractor designs to ensure...

Site Agent / Site Engineer - Electrical (HV/LV) Location: Bridgwater Contract: Inside IR35 Day Rate: Open Project: Bridgwater Tidal Barrier - Gates & Barrier Construction Overview We are seeking an experienced Site Agent / Site Engineer with strong electrical expertise to support the construction phase of the Bridgwater Tidal Barrier, specifically the build of the barrier gates and associated infrastructure. The role will work closely with major civils and M&E contractor and MEICA subcontractors on a high‑profile flood defence scheme. Key Responsibilities Electrical & HV/LV Responsibilities Fully conversant with HV transformer connections and DNO LV incomer cabling. Act as the responsible person to sign off temporary electrical supplies, including tower cranes and other site utilities. Sign off transformer connections and Sub‑Main Distribution Board (SMDB) installations. Design & Technical Review Collaborate with MEICA subcontractor electrical engineers to...

Job Title: Civil Design Engineer (all levels - Engineer/ Senior Engineer/ Principal Engineer) – Water Location: Manchester (hybrid)  Type: Contract - OUTSIDE IR35 (Ltd subject to an IR35 assessment confirming outside status)  Hourly Rate: £45.00 - £60.00 Per Hour Ltd  Hours: 40 hours per week Monday - Friday Duration: 12 months +  About the Role We are seeking Civil Design Engineers of all levels to deliver safe, high-quality and compliant civil design solutions across clean and wastewater infrastructure projects. The role will focus on the civil engineering design aspects of water and wastewater schemes, including earthworks, drainage, pipelines, structures, and site infrastructure. Our client is seeking a Civil Engineer, Senior Civil Engineer and Principal Civil Engineer.  Key Responsibilities Produce and check civil design deliverables that meet all safety, quality, technical and regulatory requirements. Develop efficient, buildable civil design solutions based on project...

Our client, a leader within the defence sector, is seeking an Electronics Engineer to join our Calibration & Maintenance Team, to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE). These tasks include fault finding and repair of test equipment, supporting routine calibrations, commissioning of Test Equipment and drift analysis. The successful candidate will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. They will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. What we're looking for from you: Minimum qualification: HNC/HND in Electrical & Electronics Engineering. Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or...

Our client are a small engineering firm who are looking to recruit a semi skilled fitter to join the team. 2 shifts are available either a 6am or 7am start. For a 6am shift the hours are 6-3 Monday – Thursday and 6-11 Friday. * To fully assemble and construct a complete assembly as per drawings. * Monitor the build of the components assembly and ensure all parts are fit for purpose. * Ensuring that all components used in the manufacture of the products are in line, straight, by using the correct and associated jigs and tools. * Continuously assessing the assemblies for quality and ensuring that all areas of the construction, meet the agreed specification and conformance requirements. * Capable of reading and understanding of general arrangement and detailed engineering drawings. * Reporting of all non-conforming parts/parts of poor quality to the supervisor. * Ensure that all work undertaken is fully understood before commencing the final assembly of components. *...

OLG Recruitment are recruiting for a CE&I Responsible Engineer to work for a client based in Warrington. This is a full time contract position, for approximately 18 months. 3 Days in office, 2 days from home. This is role is Inside IR35. Basic Purpose: To lead a team of CE&I Engineers in the definition, implementation and delivery of specified functional work that achieves the safety, functional and business needs. Essential: * Academic Qualification: HNC * Professional Qualification: Incorporated Engineer * Experience: * Minimum 5 years successfully delivering a CE&I RE role on external multidiscipline projects, from concept design through to handover, with a working knowledge of the external Engineering Standards governing the following CE&I works: * Electrical Supply Infrastructure: LV drag chain, Lighting, Earthing, Fire Alarm, CCTV, etc * Programmable Electronic Systems: Lifecycle, MIS, SCADA & PLC systems * Cyber Security *...

Job Title: CNC Plasma Operator Location: Nottingham Salary: Up to £36,000 per annum Shift: Nights (Mon-Thurs) 6pm Start Company Overview: An engineering company that specialises in designing and manufacturing products for the construction sector. They are looking for platers / fabricators to join their team working on current projects. The CNC Plasma role: · Setting and operating CNC plasma cutting machine · Loading plates onto machine · Quality checking work · Changing tools and settings when needed Responsibilities: CNC plasma machine setting and operating. Working independently whilst maintain standards and project requirements. Responsible for cleaning and maintaining CNC machine and all associated equipment and machining area.Previous Experience: Previous experience in a similar CNC Plasma cutting role to setter level. Experience in manufacturing environment. Able to use a wide variety of measuring equipment such as verniers and callipers.To Apply: To apply for...

We are seeking highly skilled and experienced Rescue Operatives to join a leading industrial company for a major project in Hull starting in early 2026. The ideal candidates will have proven experience working in high-risk environments, including confined space rescue, and be ready to take on a challenging role that ensures the safety of the workforce. Key Responsibilities: * Perform high-risk rescue operations in confined space environments * Be prepared for emergency situations, including rescue from height and confined spaces * Carry out regular safety checks and risk assessments in compliance with health and safety regulations * Work collaboratively with the site team to ensure safety standards are consistently met * Respond promptly and efficiently in emergency situations to minimise risk to personnel * Keep detailed records of incidents, safety checks, and training Essential Requirements: * Valid High Risk &...

NES Fircroft are currently recruiting an Instrument Pipefitter for a power station project on Saltend Chemical Park, Hull. Initial 2-3 month contract with possibility of extension.  Start ASAP. 10hr shifts working a 10 and 3 rotation  Key Details Include: 10 hr shifts working a 10 and 3 rotation  NAECI grade 5 rates on offer. Candidates must meet the following requirements: Instrument Pipefitting Experience on similar industrial sites.  CCNSG Safety Passport is essential (or higher i.e. IOSH/NEBOSH accepted). Full right to work in the UK required  With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever...

NES Fircroft are partnering with our major Engineering & Services client to provide a Process Instrument Design Engineer for a major nuclear project based out of Warrington. Hybrid working, 3 days in the office per week. 2-3 year project! Mon-Fri minimum 37hrs per week. Overview:  To work within the Silos PFCS Supporting Projects E&I design team delivering, supporting others delivering and checking design packages to meet safety, functional and business needs. The project is working on a major nuclear SEP project. Likely to be 2-3 years' work.  Qualifications and Required Experience:   Academic Qualification: HNC minimum / Degree in relevant E/I Engineering discipline  Professional: Incorporated Engineer Minimum 3 years successfully delivering as a Process Instrument Design Engineer on external multidiscipline projects, from concept design through to handover, with a working knowledge of the appropriate Engineering Standards.  Undertaking design assurance...

NES Fircroft are partnering with our major Engineering & Services client to provide an E&I Design Engineer for a major nuclear project based out of Warrington. Hybrid working, 2 days in the office per week. 3-year project! Mon-Fri minimum 37hrs per week. Overview:  To work within the Silos PFCS Supporting Projects E&I design team delivering, supporting others delivering and checking design packages to meet safety, functional and business needs. The project is working on a major nuclear SEP project. Likely to be 2-3 years' work.  Qualifications and Required Experience:   Academic Qualification: HNC minimum / Degree in relevant E/I Engineering discipline  Professional: Incorporated Engineer Minimum 3 years successfully delivering as an Electrical Design Engineer on external multidiscipline projects, from concept design through to handover, with a working knowledge of the appropriate Engineering Standards governing the following works: Electrical Supply...

CE&I Control System Design Engineer – Drive Innovation in Nuclear Control Systems Join a leading engineering team working on a landmark 3-year nuclear project based in Warrington, with flexible hybrid working options. As a CE&I Control System Design Engineer, you will play a pivotal role within the Silos MSSS SEP1 & 2 design team, delivering and reviewing cutting-edge Programmable Electronic System (PES) based control system designs that support critical functional and business objectives. While implementation, testing, and commissioning are handled by dedicated site teams, your expertise will ensure that designs meet the highest quality and compliance standards from concept through handover. Required Skills: Proven experience (minimum 3 years) in PES-based Control System design on multidisciplinary external projects Strong knowledge of applicable Engineering Standards in control systems design Effective verbal and written communication skills, capable of...