16 bms commissioning engineer jobs found

We have a fantastic contract opportunity for an experienced BMS Commissioning Engineer to join an exciting project in London. On offer is an initial 3 to 6  month contract (with the potential to extend), £300 - £340 per day (outside IR35), and the opportunity to work for a successful BMS integration business. The BMS Commissioning Engineer position: - As a BMS Commissioning Engineer, you will have fantastic experience and knowledge of commissioning Building Management Systems, in particular Trend and Tridium systems.  You will be required to perform software modifications, writing, and generating graphics, working alongside a team engineers. Key skills of the BMS Commissioning Engineer: - Exceptional technical knowledge and experience of the BMS sector. Proven experience commissioning BMS systems Qualifications and experience with Trend and Tridium or Delta Ability to write and manipulate software and graphics. CSCS Skill card or equivalent Benefits of the BMS Commissioning...

BMS Commissioning Engineer, Cylon or Tridium London £300 to £340 per day, Weekly pay Our client requires an accomplished BMS (Building Management Systems) Commissioning Engineer with Cylon Controls (or Tridium) experience to work on a major prestigious project in Central London. The work will involve the commissioning of Fan Coils Units using Cylon Controls, with on-going major plant commissioning works available thereafter. This contract will initially run for 6 months, however opportunity for extension and to join exciting projects in the future will be available for the right candidate. Role Profile The successful applicant for this BMS Commissioning Engineer role will need to have  experience of using Cylon or Tridium controls to commission Fan Coil Units and major plant Key skills required:-   Experienced in the Commissioning of Building Management Systems (BMS) Qualified and experienced with Cylon or Tridium Control systems. CSCS Skill Card or equivalent. £300 - £340 –...

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Role: BMS Engineer - Design Location: London - Hybrid working Duration: 12 month initial contract Pay Rate: £400-£450 P/day OUTSIDE IR35 The BMS design engineer should fully understand the engineering requirements of building control systems for a range of building types, varying in complexity. Candidates will need a thorough understanding of both mechanical and electrical building systems and be able to work autonomously. The role will require experience of interpreting customer specifications to develop comprehensive designs and scope packages for individual disciplines including panel design, hardware configuration, field equipment, software configuration, graphic packages as well as installation and commissioning scope. Candidates must also be prepared to work flexibly as part of the team and be pro-active with modern technologies and best practice. Applicants should have engineering skills as detailed below: Electrical and Mechanical systems and plant knowledge, BMS...

BMS Controls Engineer / Electrician with experience working on BMS systems Temporary role - expected to last around 6 months Inside IR35- rate negotiable Public Sector Sheffield Weekly pay Must be a qualified engineer OR a qualified electrician with time served on BMS systems Responsible for designing, implementing, and maintaining control systems that regulate various aspects of a building's operations. This includes HVAC (heating, ventilation, and air conditioning), lighting controls, energy management systems, security systems and more. To excel in this role, a BMS Controls Engineer needs to have a strong understanding of electrical engineering principles along with knowledge of programming languages. They must be able to analyse complex data sets and troubleshoot issues efficiently. Moreover, a BMS Controls Engineer must possess excellent communication skills to collaborate effectively with other stakeholders including architects, contractors, and clients. Being...

Role: BMS Project Engineer Day Rate: Up to £460 a day Outside IR35 Location: London Overview Our client is an established Building Management System (BMS) company with several ongoing projects in the London area. They are looking to recruit a BMS Project engineer with experience in Schneider Ecostruxure systems. For this role they are seeking engineers with experience in software writing and graphics experience on BMS systems. The Client The client is a medium-sized company managing multiple large-scale commercial projects in London. They specialise in BEMS projects, offering design, installation, commissioning and service works. Currently they have several projects using Schneider Ecostruxure systems which are expected to continue for the next few years. Responsibilities The client is seeking BMS Project Engineers with the following experience: * Experience with Schneider Ecostruxure systems * BMS software writing experience * BMS graphics...

Rubicon Consulting is currently recruiting for a Senior Planner on a 6 Month Rolling Contract, based in Warwick Role Summary The Senior Planner is responsible for developing, maintaining, and managing integrated project schedules for substation delivery projects. The role ensures that planning, sequencing, and progress tracking support safe, efficient, and timely execution across engineering, procurement, construction, and commissioning phases. Key Responsibilities Planning & Scheduling * Develop detailed project schedules. * Produce baseline programmes and maintain updates reflecting progress, risks, and changes. * Define critical paths, float analysis, and resource loading. * Integrate subcontractor and supplier schedules into master programmes. Project Controls * Monitor progress against plan and produce regular reports, dashboards, and earned value metrics. * Identify delays, risks, and mitigation strategies. * Support change management, including...

Electrical Installation Engineer & PPM Engineer Location: London & South East Salary: £45,000 – £50,000 (dependent on experience) About the Role We are seeking an experienced Electrical Installation Engineer to join our expanding commercial team. The successful candidate will be responsible for the installation, testing, and commissioning of electrical systems across a variety of commercial environments, as well as carrying out planned preventative maintenance (PPM) between project works. This is a hands-on role that requires someone who can work independently, take initiative on-site, and demonstrate strong competence in initial verification and testing. Key Responsibilities Install, test, and commission electrical systems within commercial buildings and refurbishment projects. Carry out PPM maintenance and small remedial works between project installations. Conduct initial verification and ensure all installations comply with current regulations and standards. Work...

Knowledge of relevant IEC, BS standards Project technical point of contact on LV systems for the end Client, Sub-Contractors and other relevant stakeholders Lead development of system wide LVAC and DC Functional Design Specification and Control & Operating philosophy, necessary for a safe and reliable system operation Proficient use of industry approved software packages (Amtech/Electrical OM) for LV system design Design and specification of LV switchboards and associated cables Develop and finalise system wide LVAC and DC load calculations LVAC and DC cable sizing for associated switchgear, SCADA, UPS and DC battery systems and other ancillary systems Design and specification of above and below ground LV cable installation Lead the development of LV system protection in liaison with Specialist design consultants Lead design verification and validation of overall LV system including those of associated stakeholders Review FAT documents, attend FATs to ensure design...

Senior CE&I Engineer - PFCS Projects (Sellafield) Contract | £51-£56/hour (Inside IR35) Warrington | Hybrid - 3 days on site / 2 days remote Are you a Senior Control, Electrical & Instrumentation Engineer looking to apply your expertise on one of Sellafield's most critical legacy clean-up programmes? We're seeking a Senior CE&I Engineer to support the PFCS (Pile Fuel Cladding Silo) projects, delivering robust CE&I design and safety documentation within a highly regulated nuclear environment. This role offers the opportunity to work at the heart of a nationally significant decommissioning mission, contributing to safety-critical systems that underpin long-term hazard reduction at Sellafield. Key Responsibilities Deliver CE&I design work packages across a broad range of PFCS project scopes Produce and check design substantiation, safety documentation, and technical deliverables Provide expert CE&I input into design justification and safety case...

Rubicon Consulting is currently recruiting for Multi-skilled Engineer on a 3 Month Contract, based in London. Role Summary The Multi-Skilled Engineer is responsible for supporting the shift leader, to ensure the safe, compliant, and uninterrupted operation of all mechanical, electrical, and building services within the estate, including support for the mobilisation activities for expansion to a new build. Compliance & Documentation Ensure completion of statutory and critical maintenance tasks. Support the shift leader in the Management of documentation including PTW, RAMS checks, shift logs(where applicable), L8 tasks, and support audits from internal and external parties, also client representatives Stakeholder & Client Service Act as point of contact (with shift leader) for Facilities, Security Control Room, hospitality, and floor support teams. Ensure minimal disruption to legal operations and maintain strong professional communication Mobilisation &...

Role: Fire Alarm Engineer - Small Works Location: Knightsbridge, London Duration: Until September 2026 Pay Rate: £350 P/day Umbrella Hours of work: 7:00 - 15:00 Week : Mon - Friday ( Flexibility/ Weekends and Evenings may be needed dependant on project schedule) Responsibilities: The Role: As a Fire Systems Small Works Installation Engineer, you will be responsible for the installation, commissioning, and handover of small-scale fire alarm and detection system projects. This role is ideal for a technically skilled engineer who is comfortable working independently can deliver high-quality work in line with industry standards. You'll be expected to liaise with clients on-site, maintain documentation, and ensure all works are delivered to specification and in line with current regulations. Key Responsibilities: - Install, commission, and test fire alarm systems to BS 5839-1 standards - Carry out modifications and upgrades on existing systems - Complete all...

Rullion are looking to recruit for the following role: Quality Engineer x 3 Location Sudbury UK Fully site based Monday to Friday End of January 2026/February 2026 start date 6 months initially Inside IR35 £20-30 Per hour (TBD) The Quality Operations Engineer will be responsible for maintaining, monitoring, and improving key elements of the Quality Management System (QMS) for the Sudbury Site, developing a culture of Quality by education, mentoring and example. Job Responsibilities: Provide Quality support to the Manufacturing Operations Team Support CAPA & Issue Resolution to ensure timely and accurate completion. Administer & support the deviation process to ensure timely and accurate completion. Administer & support the quality notification process to ensure timely and accurate completion. Prepare for supplier, customer, regulatory & notified body audits as required. Conduct internal & supplier quality audits as required. Support the change control...

We have a fantastic contract opportunity for an experienced BMS Project Manager to join an exciting project in London. On offer for the successful BMS Project Manager is a 12 month contract, £350 - £450 per day, and the opportunity to work for a successful BMS intelligent integration business. The BMS Project Manager role:- As a BMS Project Manager, you will be a highly skilled, professional and driven individual who has a wealth of knowledge and background in the BMS sector. You will be required to liaise confidently and positively with the client delivering a fantastic service, attending progress meetings, managing sub-contractors, commissioning engineers, and covering all aspects of project management. To apply you must have a proven track record of managing large BMS projects. Key Skills required of BMS Project Manager:- * Exceptional knowledge and background in the BMS industry. * Proven track record of managing large BMS projects, all aspects. * Strong commercial and...

Controls Project Systems Engineer (PLC) £c40/hr ltd rate South East ABJ7685 Salary dependent on experience but c£35-£45/ hr ltd rate (outside IR35) Start Jan 2026 - 3m with view to extension ONSITE A new position for an experienced Controls Project Systems Engineer (PLC exp) is urgently required for a leading engineering services company to for new upcoming projects. As controls engineer you will be carrying out programming of Siemens S7-1500 PLCs using TIA Portal. As controls engineer experience you will be programming of WinCC SCADA systems - interfacing with multiple S7-1500 PLCs. - Failsafe programming would be desirable. As control engineer you will have the ability to be technical lead for a control panel and review electrical drawings, panel assembly. As control project engineer you will also have the ability to generate documentation such as test plans, Installation / commissioning & Operation / Maintenance Documentation. Mainly office based apart from when you go...

World Class Defence Organisation is currently looking to recruit a FPGA / Digital Electronics Hardware Engineer subcontractor on an initial 12 month contract. The department are looking to recruit a number of contractors who have skills in FPGA, VHDL, Xilinx or Digital design.   Rate: £80 per hour (Umbrella) Location: Your base site can be any of the following (depending on your preference) Edinburgh, Southampton, Luton, Newcastle, Basildon, Bristol, or Yeovil.   FPGA / Digital Electronics Hardware Engineer Job Description: The Digital hardware engineer would be responsible for design, commissioning and test of high-speed digital electronics hardware, i.e. Printed Circuit Assemblies (PCA’s) on complex systems for airborne Radar products. The role will be based at our customer’s site in Edinburgh or Luton and may allow for hybrid working after an initial period of familiarisation onsite. Creating high-quality and robust digital electronics designs Documenting and recording...