148 fitter jobs found

Job title: Mechanical Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.82 PAYE / £24.40 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: * Bogie overhaul, damage repair and engineering * Wheel set overhaul, repair and analysis * Bogie chassis, damage repair and clean * Bogie and gearbox engineering / repair * Wheel exchange on wheel sets * Bearing,...

Mechanical Fitter - Water Treatment Plant Location: Bristol, South West (commutable from Bath, Filton, Avonmouth, Portishead, Gloucester, Swindon, Newport) Rate: £28.00 - £30.00 per hour (DOE) Hours: Up to 50 hours per week + overtime Job Type: Contract (Long-Term - Up to 5 Years) Are you an experienced Mechanical Fitter looking for long-term contract work in Bristol within the water or utilities sector? We are recruiting skilled Mechanical Fitters to work on a major water treatment plant in Bristol. This is a long-term contract opportunity offering up to 50 hours per week, overtime potential and secure work for up to 5 years. This role is suited to Mechanical Fitters with strong industrial experience in process, utilities or heavy engineering environments. The Role - Mechanical Fitter (Contract) As a Mechanical Fitter, you will carry out installation, maintenance and refurbishment work on mechanical plant equipment within a live water treatment environment. Key duties...

Mechanical Fitter. Location: Doncaster Rate: £28.66/hour (Umbrella) Contract: 3 months + Hours: 36 hours per week Start Date: ASAP Open to industry applicants About the Role: We’re currently seeking a Level 3 Fitter to support operations on diesel locomotives at our Doncaster depot. This is a hands-on role involving fuelling, servicing, and safety-critical maintenance of rolling stock. Key Responsibilities: Fuelling Operations: Safely refuel locomotives using red-dyed diesel. Follow strict procedures for fuel handling and transfer. Maintain accurate fuel logs and documentation. Service Support: Load/unload consumables (sand, water, lube oil, waste fluids). Conduct pre- and post-shift inspections of fuelling equipment. Perform light maintenance and cleaning duties. Safety & Compliance: Wear all required PPE and follow depot safety protocols. Report incidents or unsafe conditions immediately. Empowered to stop work if safety is compromised. Communication &...

Job Title: Assembly Fitter Location: Loughborough, Leicestershire Duration: Ongoing Contract (6 months temp to perm) Shifts: Days We are currently recruiting for experienced Assembly Fitters for temporary to permanent positions in Loughborough. Working within a team of Erectors to produce Transformer Internal Assemblies to Engineering specifications. This involves reading and understanding engineering drawings, working to Quality Stage Charts, fitting, crimping, and some minor electrical testing. Key Responsibilities: * Building of core & coils for 33kV, 66kV, and 132kv power transformers within the Transformer Assembly section. * Transposing taps on 33kV, 66kV, and 132kv power transformer coil windings. * Preparing, crimping & connecting, and routing of cables in adherence to defined critical clearance tolerances. * Conduct pre-tank parallel and ratio checks to electrical specifications. * Standing/upending, plating up & oven processing/pressing of all coil...

Mechanical Maintenance Fitter Location: Enderby/Leicester Duration: 1 Month rolling Contract Hours: Monday to Friday, 7:00am – 4:00pm Rates: £30 per hour – Outside IR35 or £23 per hour PAYE + £2.78 holiday pay We’re recruiting for a Mechanical Maintenance Fitter to support a busy recycling and processing site in Enderby on a one-month contract. This is a hands-on role combining mechanical maintenance, welding and fitting work in a heavy industrial environment. The Role Planned and reactive mechanical maintenance Welding repairs (MIG) on plant and equipment Mechanical fitting, including replacing bearings, motors, gearboxes and chains Working on conveyors, balers, shredders and processing equipment Supporting breakdown response and minimising downtime General mechanical repairs across site What We’re Looking For Proven experience as a Mechanical Fitter or Maintenance Engineer Strong welding capability Experience working in heavy industrial, manufacturing or recycling...

Mobile Heavy Plant Fitter Location: Mobile role covering sites between Teesside and Scunthorpe (accommodation provided where required) Salary: £38,000–£40,000 per annum (depending on experience) + overtime Contract Type: Full-Time, Temporary to Permanent Working Hours: Monday to Friday, 7:30am – 4:00pm (42 hours per week) Benefits Package * Company van * Tools and all necessary specialist equipment * Company iPad and mobile phone * Accommodation (digs) provided where required * Overtime opportunities * Full support from the wider team Please note: Applicants must be aged 25 or over due to insurance requirements. Role Overview We are seeking an experienced and reliable Mobile Heavy Plant Fitter to join our growing team. This is a field-based position covering multiple customer sites across the Teesside to Scunthorpe region. The successful candidate will be responsible for the servicing, maintenance, fault diagnosis and repair of a broad range of heavy plant machinery,...

Mechanical Assembler/Site Fitter Temp to Perm, £13p/hr-£14p/hr DOE, 39hrs per week LEEDS I am looking for an experienced Mechanical Assembler, looking for a mixed role of Assembly and onsite Fitting, to work for an Industrial Manufacturer based in Leeds. The successful candidate must have previous Mechanical Assembly or Mechanical Fitting experience. However, if you come from a Plumbing or Air Conditioning background and want to learn new skills, then please apply. Other skills required are: -Can follow written engineering/technical drawings -Experience of working with Sheet Metal is advantageous -Must have experience of using various hand tools, air tools and Rivet Guns -Site Fitting knowledge would be beneficial -Experience in site duct work -CSCS Card is Essential -Knowledge of Manual Handling Techniques will be vital as the role will include heavy lifting The Assembly work is quite intricate, so dexterity is vital, while the site-based work will involve travelling...

We are recruiting Electrical Fitters for a specialist engineering company in Stoke-on-Trent, focused on fitting industrial scanning systems and electrical control panels onto large commercial vehicles and trucks. The role involves installing complex electrical systems and control panels onto vehicle chassis. You'll be working from engineering drawings to wire, fit, and terminate electrical components and cabling for industrial-grade scanning and automation equipment. Key Responsibilities: Electrical installation of scanning systems and control panels on large vehicles Wiring complete systems onto truck and van chassis Fitting of data and comms cabling including RJ45, Cat5/Cat6 General mechanical fitting: marking out, drilling, tapping, bracket fitting Reading and interpreting engineering wiring diagrams and schematics Using hand and power tools for installation tasks Experience with vehicle conversions is beneficial

Job Title: Mechanical Fitter (Full Training Provided) Location: Crewe, Cheshire Hours: Monday to Friday 8:00am - 4:30pm (37 hours per week) - flexibility required to work shifts Pay Rate: £16.57 per hour PAYE / £21.44 per hour Umbrella (Training rate - approx. first 6 weeks) £18.82 per hour PAYE / £24.40 per hour Umbrella (Post training) Duration: Ongoing Start Date: March / April 2026 Training Day: Very likely to be 27th March 2026 We are recruiting over Mechanical Fitters for long-term contracts at the Crewe depot. This is a genuine opportunity to move into the Rail industry - full training will be provided. You do not need rail experience. You do not need formal qualifications. If you have at least 18 months' hands-on mechanical experience using tools in a practical environment, we can train you. The role involves the mechanical overhaul of rail bogies, including: Bogie overhaul, damage repair and engineering Wheelset overhaul and repair Gearbox and component repairs...

Position: Pipe Fitter Location: Wolverhampton / Belfast Hours: Approx 70hrs/week Mon-Sun Start Date: March 2026 Duration: 3 months initially, leading to permanent roles PAYE Pay Rates: Mon-Sun, All Hours: £26.00/hr, including Holiday Pay Lodge Allowance: £60.00/night Travel Allowance: £20.00/hr The Role: Integrate Engineering Resources are currently recruiting teams of Industrial Pipe Fitters for power stations near Wolverhampton and Belfast. Duties will include working from drawings, installation and maintenance of industrial wall to wall tubes, and carbon and stainless steel pipework around superheaters and economisers. Requirements: - CCNSG card - NVQ 3 / City & Guilds qualification in Pipe Fitting trade - Experience of working on industrial sites ie power stations, refineries, steelworks About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction and Maintenance sectors. Our specialist recruitment...

Aircraft Mechanical Fitter - Shawbury (Onsite) £21.05 per hour PAYE / £28.16 per hour Umbrella 6‑month contract, likely extension Are you an experienced Aircraft Mechanical Fitter looking for your next contract opportunity? Our client is seeking skilled professionals to support their rotary‑wing fleet at their Shawbury site. This is a fantastic chance to develop your career within a dynamic, high‑performance engineering environment where no two days are the same. Key Responsibilities As an Aircraft Mechanical Fitter, you'll play a vital role in maintaining, inspecting and supporting aircraft operations. Working closely with supervisors and certifying engineers, you'll contribute to safe flight operations, seamless maintenance activity and the smooth running of the hangar. Maintaining, inspecting and supporting operations for a modern military training aircraft fleet. Conducting inspections, repairs and troubleshooting as required. Perform detailed mechanical work across...

Job Title: Electrical / HVAC Fitter Location: Crewe, Cheshire Pay Rate: £18.82 per hour PAYE / £24.40 per hour Umbrella Hours: Monday to Thursday 8:00am - 4:30pm, Friday finish at 12:15pm (37 hours per week) - flexibility required to work shifts Duration: Ongoing Start Date: ASAP We are recruiting for Electrical / HVAC Fitters to join a leading Rolling Stock company based at their depot in Crewe. This is an ongoing contract opportunity working on the electrical overhaul of rail HVAC units. Duties will include: HVAC overhaul, repair and fault finding Reading schematics and technical drawings Electrical builds and wiring Crimping and soldering Pipe bending Brazing (desirable) Re-engineering and production of spare parts General electrical and mechanical repair and replacement work on rolling stock The role involves ensuring trains are safe, reliable and defect-free through high-quality overhaul and maintenance work. Backgrounds considered: Rolling Stock, Automotive,...

Job Title: Hydraulics Fitter / Mechanical Fitter Location: Burton upon Trent Shift: Days only Hours: 40 hours per week Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Salary: DOE Duration: Contract role, minimum 6 months + may go permanent. Start Date: Immediate Client Overview Our client is a leading manufacturer and front-line supplier of powertrain products across the UK and Ireland. Their areas of expertise include engine overhaul, final drive overhaul, and locomotive refurbishment within the rail sector. Role Overview We are recruiting a Hydraulics Fitter to support ongoing rail projects at the Burton upon Trent site. This is a bench-based role working as part of a team, stripping and rebuilding mechanical and hydraulic systems on locomotive rafts and transmissions. Key Responsibilities * Strip down engines, transmissions, and mechanical components for overhaul * Build and rebuild transmissions and raft assemblies within the rail industry * Fit refurbished...

Fitter Salary: £27,000 Start: As soon as possible The role includes a need to be flexible with working hours to cover Central Glasgow area. A company vehicle and mobile phone are provided. Position Summary As a Fitter, you will install soap and sanitizer dispensers within NHS Scotland. Key Responsibilities · Complete dispenser installations. · Good general housekeeping. · Work as part of a team or independently when required · Complete site surveys, basic Excel skills required Experience, Knowledge & Skills · Full UK Driving Licence (Essential). · Basic tool skills. · Ability to work independently and on own initiative, as well as working as part of a regional team. · Focus on quality and a keen eye for detail. · Effective communication and customer service skills. Benefits Package · Fully expensed company vehicle · Uniform and tools required · Flexible working hours, overtime opportunity

Apply Now Attachment Fitter required Birmingham The Staffing Network are seeking a skilled and motivated Hydraulic Attachments Fitter to join our clients Machinery and Plant hire division in their Birmingham Depot The successful candidate will be responsible for the installation, maintenance, and repair of hydraulic attachments used on various heavy machinery and construction equipment. This will be a role that will also involve Delivering/Collecting and attaching/detaching attachments to/from machinery on site. Key Responsibilities: * Deliver/Collect, Install, assemble, and fit hydraulic attachments to/from heavy machinery. * PDI and inspect Machines and Attachments to make sure they are fit for purpose. * Conduct routine maintenance and troubleshooting on hydraulic systems. * Diagnose faults and carry out necessary repairs efficiently. * Ensure all hydraulic components meet safety and quality standards. * Maintain accurate records of work completed and...

Attachment Fitter required Nottingham The Staffing Network are seeking a skilled and motivated Hydraulic Attachments Fitter to join our clients Machinery and Plant hire division in their Nottingham Depot The successful candidate will be responsible for the installation, maintenance, and repair of hydraulic attachments used on various heavy machinery and construction equipment. This will be a role that will also involve Delivering/Collecting and attaching/detaching attachments to/from machinery on site. Key Responsibilities: * Deliver/Collect, Install, assemble, and fit hydraulic attachments to/from heavy machinery. * PDI and inspect Machines and Attachments to make sure they are fit for purpose. * Conduct routine maintenance and troubleshooting on hydraulic systems. * Diagnose faults and carry out necessary repairs efficiently. * Ensure all hydraulic components meet safety and quality standards. * Maintain accurate records of work completed and parts used....

Mechanical Fitter Leicester, Leicestershire Rate: £15 - £18 per hour Job Type: 1-month Temporary Contract About the Company A leading UK manufacturer is seeking an experienced Mechanical Fitter to join their team on a temporary basis for a minimum of 1 month's work. With over 20 years of industry expertise, the company delivers innovative, high-quality converting solutions to customers worldwide. From initial design through to installation and programming, it specialises in bespoke and special-purpose machinery, built to meet international quality and CE safety standards. Continuous investment in new technologies ensures it remains at the forefront of converting innovation into value. The Role As a Mechanical Fitter, you will play a key role in the assembly, build and installation of bespoke converting and packaging machinery. This is an excellent opportunity to join a forward-thinking engineering environment working on technically advanced equipment. Commutable from:...

Mechanical Fitter (Valves/Pumps) Middleton, Greater Manchester £25 per hour (Umbrella) Inside IR35 3 month initial contract with Temp to Perm afterwards Excellent opportunity for a Mechanical Fitter with pumps or valves experience who is looking for an immediate start while working for an international market leading company with excellent overtime opportunities to boost your earnings. Do you have experience in mechanical fitting working on pumps, valves, compressors or similar machinery? Are you looking to maximise your earnings through plenty of available overtime? This company are international market leaders and supply a huge range of speciality services and products that serve an international client base. Due to a current period of rapid growth they are now looking to add to their specialist team. In this role you will be working in the assembly and testing of a range of pump systems working in a workshop environment. You will be working as part of a team and be...

The Rewards and the benefits: * Competitive salary * Opportunity to progress to permanent * Overtime available * Immediate start available * Dayshift hours, Mon – Friday MTrec’s new career opportunity: MTrec Technical are proudly representing our prestigious manufacturing client, based in Gateshead, with their plans for growth and expansion, by recruiting a Mechanical Fitter to join their team. Our client is well established within their sector and are currently experiencing strong growth fuelled by high demand for their products. If you are an experienced fitter, with relevant skills and qualifications, apply now for an immediate response! The Job you’ll do: * Mechanically fitting small and complex components * Reading and working to engineering drawings * Ensuring quality standards are met * Ensure that you comply with the requirements of the company Health, Safety and Environmental Policy. * Promote a safe working environment About You: *...

Job title: Raft Fitter - (mechanical Fitter) Job location: Near Burton upon Trent Shifts: Days only. Hours per week: 40. Hours: 7am to 4pm Monday to Thursday, 7am to 1pm on Friday. Duration: 6 month contract, highly likely to extend, possible temp to perm. Start date: immediate. Payrate: dependant on experience. Client Summary: Leading manufacturer and front line supplier of powertrain products based in the UK and Ireland. Areas of expertise include Engine Overhaul, final Drive Overhaul and locomotive refurbishment. Position Summary: Stripping Rafts / building transmissions within the Rail industry. You will be working in teams to breakdown mechanical systems on to locomotive rafts and rebuild. Roles can include: * Engine strip down or strip down of components and rebuild. * Fitting newly re-furbished engines back onto the rafts including all components that service that service and help the running of the engine, radiators, pumps, tanks, pipe work, electrical...