61 site fitter jobs found

BMS Commissioning Engineer, Tridium, Trend or Siemens Immediate start 4 - 6 month contract £300 - £360 per day Our client requires an accomplished BMS Commissioning Engineer with Tridium, Trend or Siemens Building Management Controls experience to join their team on either a project in London or a site in Hertforshire . There are several roles and projects currently available in: the City, East London and also in Hertfordshire, the best site would depend on your location and experience for each project. This is on a contract basis and will initially run for 4 to 6  months. To start immediately and is likely to be extended on a rolling basis.  This position could also be as the Lead Commissioning Engineer if you have the right experience and the rate would then reflect this. Key skills required:- Experienced in the Commissioning of Building Management Systems ( BMS ) Qualified and experienced with Tridium ,Trend or Siemens Control systems. CSCS Skill Card or equivalent is...

Mechanical Fitter, Motherwell (Sites across Scotland), £21.00 per hour + overtime, (1.5x) + paid travel, Mon–Fri | 7:30am–4:00pm | 40 hrs We are recruiting an experienced Mechanical Fitter for an immediate start on a temp-to-perm contract. Work is primarily within the water & wastewater sector, with plenty of overtime available. Benefits: * £21.00 per hour * Overtime paid at 1.5x * Paid travel time to and from site * Monday to Friday work * Immediate start * Temp-to-perm opportunity Responsibilities: * Carry out mechanical installation of pumps, screens, and rotating equipment * Install pipework, valves, and associated mechanical systems * Work across water and wastewater treatment sites throughout Scotland * Ensure all installations meet project specifications, quality standards, and health & safety requirements Requirements: * Previous experience as a Mechanical Fitter * Experience in water/wastewater or similar industrial...

Our client, are seeking Mechanical Fitters to work on a Thames Water site near Harlow. This is a contract position.  Start: ASAP Duration: 9-10 Months Rate: Up to £270 per day (Experience Dependent) Hours: 45 per week As this role is working on a water treatment site, ideally you will have previous water sector experience, although candidates with an industrial background may be considered.  LOCAL CANDIDATES ONLY - lodge cannot be offered at this time. Job Responsibilities: Onsite installation and removal of relevant water treatment machinery/equipment, including but not limited to: large bore stainless steel pipework, brackets/supports, pumps, motors, valves, steelwork, handrails. Ability to work independently while also being an effective communicator in team settings. Strong organizational skills with excellent multitasking abilities. Adhering to onsite health and safety regulations. Collaborating with other trades and end client on site.    Requirements: CSCS...

Skilled Aircraft Fitter Filton, Bristol - 100% Onsite £27.89 per hour (Umbrella) / £20.85 per hour (PAYE) 12‑month contract - likely extension & potential for permanent role Start date intake: May 2026 About the Role We are supporting a leading aerospace organisation in the recruitment of Skilled Aircraft Fitters to join their production team on a long‑term contract basis. This is an excellent opportunity to work on cutting‑edge commercial and military aircraft at a highly respected UK aerospace site. You'll be part of the Build Production team, working across one of the most successful military aircraft programmes. The role is fully onsite at Filton, working Monday-Thursday on daytime shifts. Key Responsibilities Interpret and work from engineering instructions and aircraft drawings Carry out structural and mechanical fitting tasks to required quality standards Use power tools for drilling, shimming, sealing and assembly work Complete 1st party certification (training...

Position: Semi Skilled Fitter Location: Buxton cement Hours: 10hr shifts, Mon-Sun Start Date: Sat 7th Feb Duration: Till 26th Feb, further outage work to follow PAYE Pay Rates: Mon-Sun: £20.50/hr including Holiday Pay Lodge Allowance: £50.00/day worked Gross Pay: £1785.00/week The Role: Our client has a requirement for a Semi Skilled Fitter for immediate starts on a cement plant shutdown in Buxton, Derbyshire. Duties will include assisting with maintenance and replacement of mechanical components across the site, including precipitator filter systems, general plant maintenance and replacing bag filters. Essential Requirements: - CSCS / CCNSG card - Confined Space Entry certificate an advantage - Experience using hand and power tools - Experience of working on large industrial sites (cement, power, refinery, steel) About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction sector. Our specialist recruitment activities range...

We are looking for an experienced Mechanical Fitter / Maintenance Engineer for a temp to perm position. This is an exciting opportunity to join a 24/7 mechanical maintenance team at a FMCG facility. Immediate starts available! As a Mechanical Fitter / Maintenance Engineer you will carry out mechanical maintenance and repairs on production machinery and infrastructure, performing planned and reactive maintenance to minimise downtime. Support production reliability, respond to breakdowns, and ensure compliance with Health, Safety, Environmental, and Food Safety standards. Mechanical Fitter / Maintenance Engineer – Hours & Pay: 39 hrs/week: Monday –Thursday 7:30–16:00, Friday 7:30–15:30 (30-min lunch). Hourly rate standard: £19.10/hr, Mon–Fri OT (after 8 hrs): £28.65/hr, Saturday: first 4 hrs £28.65/hr, thereafter £38.20/hr, Sunday: £38.20/hr, Overtime optional Mechanical Fitter / Maintenance Engineer – Key Duties: * Mechanical maintenance, repairs, and improvements to...

Location: Perth Starting Rate: £17.63 per hour Estimated Earnings: £41,000-£52,000 Per Annum Hours: Guaranteed minimum 45 hours per week Shift Pattern: Monday to Friday Blue Arrow is recruiting for experienced PCV Mechanics to join a well‑established engineering team based in Perth. This is an excellent opportunity for a skilled and motivated Fitter/Mechanic who takes pride in delivering high‑quality work and keeping essential transport services running smoothly. Whether you come from a PCV, HGV, LGV, automotive, plant, or similar engineering background, your expertise will play a key role in maintaining a modern and varied fleet to the highest safety and performance standards. What You will be doing Carrying out MOT preparation, repairs, diagnostics, and general maintenance to industry and DVSA standards Diagnosing mechanical, electrical, and hydraulic faults using modern diagnostic tools Responding to vehicle issues both within the depot and out on the road when required...

Rubicon Consulting is currently recruiting for an Mechanical Fitter on a 4 month contract based in Scotland. Role Summary This role is to assist SE work within a site team on mechanical installation activities. Reports to Site Supervisor, or chargehand as required by deployment. Duty of care for themselves and all individuals on site to ensure that they work safely at all times. Mechanical installation of substation components. Key Tasks 1. Works to all applicable Siemens Energy QEHS procedures as briefed in the site induction. 2. Carries out any other duties within their competence to the relevant quality / industry standards as directed by the Site Supervisor. 3. Operate within timescales set out by their Work Party Leader and highlight potential deviations in advance. 4. Must have experience working on substations as a mechanical fitter with telehandler 360. Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance...

Contract PSV Engineer “Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset?” Why work as a Venatu Contractor? * Wages paid weekly. * Roles inside and outside of IR35. * Local work wherever possible, as well as national opportunities, short and long-term contracts available. * Developing your skill set, training courses subject to meeting the criteria. * Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: * Carry out repair and maintenance to exceed DVSA standards. * Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. * Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. * Routine inspection and servicing to maintain roadworthiness and MOT standards. * Carry out major unit changes and repairs where applicable. * Complete necessary paperwork including service sheets to a good...

Contract PSV Engineer “Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset?” Why work as a Venatu Contractor? * Wages paid weekly. * Roles inside and outside of IR35. * Local work wherever possible, as well as national opportunities, short and long-term contracts available. * Developing your skill set, training courses subject to meeting the criteria. * Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: * Carry out repair and maintenance to exceed DVSA standards. * Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. * Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. * Routine inspection and servicing to maintain roadworthiness and MOT standards. * Carry out major unit changes and repairs where applicable. * Complete necessary paperwork including service...

Contract PSV Engineer “Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset?” Why work as a Venatu Contractor? * Wages paid weekly. * Roles inside and outside of IR35. * Local work wherever possible, as well as national opportunities, short and long-term contracts available. * Developing your skill set, training courses subject to meeting the criteria. * Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: * Carry out repair and maintenance to exceed DVSA standards. * Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. * Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. * Routine inspection and servicing to maintain roadworthiness and MOT standards. * Carry out major unit changes and repairs where applicable. * Complete necessary paperwork including service...

InstaStaff are currently recruiting  for a Mechanical Fitter to join a waste management company based in Knaresborough. You will be required to support the mechanical maintenance team and the lead mechanical engineer in maintaining all aspects of mechanical plant, services, and equipment. As a mechanical fitter you will assist with planned preventative maintenance tasks, rectifying problems on mechanical assets and in the effective delivery of the planned outages whilst upholding the highest standard of health, safety, and quality. The duties of the Mechanical Fitter will be: Rectify problems on mechanical assets such as conveyor belts, pumps, gearboxes, valves and cranes Carry out Fabrication work and general workshop duties. Be responsible for PPM and Reactive maintenance work, ensuring the highest standards are set and maintained. Assist with and actively participate in planned outages.  Operate Workshop machinery, fabrication, and refurbishment. Communicate problems and...

Rubicon Consulting is currently recruiting for Multiple Mechanical Fitters on a 7 month Contract, based in Scotland Rates & Payment * Pay Rate: £29 – £33 per hour (depending on hours worked and days) * Payment Options: LTD Company or Umbrella The client requires Fitters with the following certs. * 1 x Telehandler * 1 x Lifting Supervisor * 2 x Slinger/Signaller Key Responsibilities * Mechanical installation and fitting work within a live substation environment * Assembly, installation, and maintenance of mechanical equipment * Working safely and in line with site procedures and industry standards * Following drawings, specifications, and method statements * Liaising with supervisors and other trades on site Essential Requirements * Proven substation experience (ESSENTIAL) * Time-served Mechanical Fitter or equivalent experience * Strong understanding of health & safety within high-voltage environments * Ability to work long...

Fitter Location: Sheffield (with travel to London, Birmingham, Milton Keynes & occasionally Scotland) Contract: Temporary Salary: £17 per hour Industry: Rail / Depot Maintenance Job Overview Concept Recruitment is recruiting for a Fitter to assist the Site Engineer in the maintenance and upkeep of depot equipment used across multiple rail sites. This is a hands-on, mechanical role with some basic electrical work, involving travel to key locations. Ideal candidates will have mechanical experience, a strong safety mindset, and be happy to work across different sites. Key Responsibilities Carriage Wash Systems (Depot equipment for washing trains): * Replace gearboxes, motors, bearings, couplings, and pumps * Repair and maintain pipework * Re-brush machines on site and carry out setup works at the Sheffield base * Perform monthly maintenance visits Controlled Emission Toilets (Depot equipment for emptying train toilets): * Conduct monthly maintenance visits...

Mechanical Fitter Full-Time | Permanent £17.50 per hour + overtime at 1.5x Cheltenham base | UK & international site work Why You’ll Want This Role If you’re a hands-on Mechanical Fitter who enjoys building machinery properly, working from drawings, and seeing a job through to completion, this role offers real variety and responsibility. You’ll be working on bespoke automation and conveyor systems, not repetitive production-line work. The role is strongly mechanical, with paid overtime, early Friday finishes, and opportunities to travel in the UK and overseas. You’ll be trusted to do the job right, supported by an experienced team, and given the chance to work on interesting, well-engineered equipment. What You’ll Be Doing Mechanical assembly of automation machinery and conveyor systems Fitting frames, guards, bearings, shafts, drives, and precision components Building medium-sized assemblies and sub-assemblies Installing and setting up pneumatic systems (valves,...

Contract PSV Engineer “Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset?” Why work as a Venatu Contractor? * Wages paid weekly. * Roles inside and outside of IR35. * Local work wherever possible, as well as national opportunities, short and long-term contracts available. * Developing your skill set, training courses subject to meeting the criteria. * Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: * Carry out repair and maintenance to exceed DVSA standards. * Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. * Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. * Routine inspection and servicing to maintain roadworthiness and MOT standards. * Carry out major unit changes and repairs where applicable. * Complete necessary paperwork including service sheets to a good...

Pipe Fitter – Glasgow PAYE or CIS options available We’re growing and looking for a Pipe Fitter to join our team permanently. This is a great chance to work in a respected engineering environment with site work opportunities, enhanced allowances, bonuses, and accommodation (where applicable). Pay Rates PAYE * £20.01/hr (Normal Time) * £28.01/hr (Overtime) CIS * £23.00/hr (Standard) * £27.85/hr (Overtime) What You’ll Do * Fabricate and fit pipework across carbon steel, stainless steel, and dairy systems * Work with thin wall metric, hygienic, schedule stainless and carbon pipe * Cut, prep, and tack pipe * Build skids, spools, and welded pipework * Operate workshop machinery and tools * Support overtime and weekend work as needed Welding to coded standard is a bonus, but not essential. What We’re Looking For * Time-served Pipe Fitter (or 4+ years’ experience) * Strong...

We are currently looking to recruit a time served pipe fitter for a very long-term role (permanent for right person) in and around the Mold area. Experienced working on petrochemical sites/pharmaceutical/oil and gas sites is essential. This is not a commercial works. The candidate must be able to measure (point to point) to enable fabrication and understand pipework isometric drawings to enable fabricating/installing new pipework. He/she must be willing to liaise with the client and client operations (to enable permit signing and requests) as there may be periods, they will be on site alone. They must also be able to works as a team, as at other periods they will be working in small teams. They must have a full clean driving licence. This work is outside of IR35 so we can payroll limited Please send your CV to be considered for this work

We are currently looking to recruit a time served pipe fitter for a very long-term role (permanent for right person) in they Stalybridge area. Experienced working on petrochemical sites/pharmaceutical/oil and gas sites is essential. This is not a commercial works. The candidate must be able to measure (point to point) to enable fabrication and understand pipework isometric drawings to enable fabricating/installing new pipework. He/she must be willing to liaise with the client and client operations (to enable permit signing and requests) as there may be periods, they will be on site alone. They must also be able to works as a team, as at other periods they will be working in small teams. They must have a full clean driving licence. This work is outside of IR35 so we can payroll limited Please send your CV to be considered for this work

Title: Mechanical Supervisor Location: Kent (preferred) – covering Kent, Sussex & Hampshire Rate: £210 per day Contract Type: Contract / CIS Start: Immediate / Ongoing Job ID: 3097/11 HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas. HSB Technical Ltd is currently recruiting an experienced Mechanical Supervisor to work across multiple sites in Kent, Sussex, and Hampshire. This is a hands-on working supervisor role, supporting works progression while maintaining the highest standards of health and safety. The successful candidate will supervise mechanical activities while also carrying out practical tasks on site, working closely with fitters and travelling to sites in a company-supplied van to ensure projects are delivered safely, efficiently, and to a high standard. Key...