17 engineering jobs found in Bicester

MES SME (Manufacturing Execution System Subject Matter Expert) Location: Caswell - Hybrid Working Available Type: Permanent We are seeking an experienced MES SME to take ownership of a critical Manufacturing Execution System environment within a high-tech manufacturing operation. This is a key role focused on supporting, optimising, and evolving MES capabilities to drive production efficiency, system reliability, and compliance. The successful candidate will act as the technical lead and subject matter expert for the MES platform, working closely with manufacturing, engineering, quality, and IT teams to support business-critical operations and future system upgrades. Key Responsibilities Manage, configure, maintain, and optimise the MES environment Ensure high system availability and performance across manufacturing operations Support integration with ERP, PLC, and other enterprise systems Lead troubleshooting, enhancements, and continuous improvement activities Analyse...

Good Morning! We are currently recruiting for an Mechanical Technician in Culham, Didcot for a great project, a contract inside IR 35, for 12+ months that is ran by a Public Sector Authority. About the role: As a mechanical technician you would be expected to supervise mechanical fitters and other junior craft effort. Mechanical systems to include vacuum, cooling, pressurised and electro-magnetic. This shall include construction of new systems and maintenance of existing systems including fault finding, and repair. Essential Experience Level 3 NVQ Certificate in Mechanical Engineering (Equivalent qualifications to those stated will be considered). Worked in an industrial setting, specifically mechanical assembly and maintenance Experience of vacuum systems and understanding of electrical work, would be desirable. Knowledge of modern manufacturing techniques. Experience of working under a Written Safe System of Work/Method Statements/Risk Assessments.Interviews will start as...

Good Morning! We are currently recruiting for an C&I Wire Person in Culham, Didcot for a great project, a contract inside IR35, for 12+ months that is ran by a Public Sector Authority. About the role: provide C&I wire person/panel builder support to the facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and in-situ fault finding Essential Experience Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); Support fault finding and repair work on C&I systems Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Capable of...

Job Description: As a CNC Setter Operator at Cosworth, you will be responsible for manufacturing Crankshafts and Camshafts as well as a variety of other engine components for super/hyper car manufacturers. In this role, you'll be responsible for setting up and operating multiple CNC machines, as well as reading and editing programs to ensure smooth operations. You will also be responsible for conducting quality control checks using various measurement tools, and inspecting/maintaining machinery, tooling, and equipment. Your goal will be to ensure that all parts meet specifications and to minimise production downtime. The Role:  To manufacture camshafts and crankshafts for Automotive and Aerospace customers. To set and operate machines in a safe manner with regard to themselves and others, complying with the Health and Safety at Work Act. To produce components to the company standard in the most efficient / cost effective manner. To be familiar with all systems and procedures...

Mechanical Fitter/Assembler High Wycombe £15-16 per hour Proactive Global currently has an exciting opportunity for a Mechanical Fitter/Assembler o begin work for a leading manufacturing and production business in High Wycombe. The idle candidate will be helping in Mechanical Installation of the extraction systems and installing the inter-connecting ductwork to the customer's woodworking machines. Key Responsibility: Mechanical Installation of extraction systems and installing the inter-connecting ductwork to customers woodworking machines. Servicing existing systems Replacing tubular filters in our filter systems Occasionally working in confined spaces. Main Requirements: * Experience in mechanical installation would be good but not essential as full training will be given. * A good attitude with a positive look on learning new skills. * A Team Leader, able to work as part of a team. * Excellent communication and interpersonal skills If you are interested in this...

Tooling Design Engineer Ampthill, Bedfordshire Contract (6 months), inside IR35, 37.5h, 4 day working week Monday to Thursday About the Role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to provide technical support to the team in the design, development and implementation of industrial tools, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, performance requirements and ensure legislative compliance is adhered to. A thorough working knowledge of CAD...

Tooling Design Engineer Ampthill, Bedfordshire Contract (6 months), inside IR35, 37.5h, 4 day working week Monday to Thursday About the Role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will be required to provide technical support to the team in the design, development and implementation of industrial tools, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, performance requirements and ensure legislative compliance is adhered to. A thorough working knowledge of CAD...

Interim Transformation & Turnaround Director Location: UK - Midlands Based Start Date: Immediate Contract Type: Interim Day Rate: Up to £850 per day (DOE) Overview We are seeking a highly experienced Interim Transformation & Turnaround Director to join a large-scale machinery manufacturing organisation at a critical stage of its operational improvement journey. This is a hands-on role, requiring a strong leader who can rapidly assess, stabilise, and transform manufacturing performance. You will lead from the front, working directly with operational teams to deliver sustainable improvements in productivity, efficiency, and culture. Key Responsibilities Lead end-to-end turnaround of manufacturing operations, driving immediate and sustainable performance improvements Conduct rapid diagnostics of current operations, identifying inefficiencies, bottlenecks, and improvement opportunities Implement Lean manufacturing principles, continuous improvement frameworks, and...

Are you ready to take your career to the next level in a dynamic and innovative environment? This is your opportunity to join a forward-thinking Defence company renowned for its cutting-edge technology and exceptional craftsmanship. As a Vehicle body Paint Sprayer, you will play a pivotal role in delivering high-quality finishes that exceed expectations and set industry standards. If you're passionate about precision, artistry, and working with state-of-the-art equipment, this role is the perfect fit for you. Working Monday to Friday 8am - 4:30pm on a 6 month rolling contract with a pay rate of £19.11 PAYE or £25.00 contract rate.  What You Will Do: - Prepare vehicles for painting by cleaning, sanding, and masking areas to ensure a flawless finish. - Mix paints to match colours accurately and apply primer, base coats, and clear coats with precision. - Operate spray guns and other equipment, adjusting settings to achieve optimal results. - Conduct quality checks to inspect...

Laminator – Manufacturing Operator Location: Hayes, Middlesex Hours: Monday to Friday, 7am to 3pm Type: Contract / Temp, Full-Time About the Role We are currently recruiting for a Laminator / Laminating Operator to join a busy manufacturing site in Hayes. This is a hands-on role within the laminating section, working in a cleanroom environment to support the production of high-quality laminated sheets used in aerospace and specialist engineering applications. This role is ideally suited to candidates with solid manufacturing experience who are detail-oriented, reliable, and comfortable working in a physically active role. Key Responsibilities Operate a continuous coating machine to apply adhesive to foils. Stack coated foils and prepare laminated sheets in a cleanroom environment. Load and unload curing presses, using a ball roller table to move heavy loads. Carry out peel testing to ensure correct peel strength. Perform guillotining and other associated production...

Assembly - Gloucester - Temporary with the possibility of going permanent - £13.34 per hour then £14.41 p/h after 12 weeks - 37.5 hour week Working one week 6am til 2pm then the next week 2pm til 10pm - early finish every Friday! We have an exciting opportunity for an experienced Assembler to join a Manufacturing company based in Gloucester. The role's will involve: Assembling products from drawings Using hand tools and glue Inspecting and quality checking to high standards Working to individual and team targetsThe successful Assembler will need to have the following: Good communication skills Previous exposure to a Manufacturing or Engineering environment (working or College) Able to read measurements and diagrams These role will require face to face registrations in the Branch. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we...

Stock Control / Logistics Administrator required for our manufacturing client based in central Gloucester paying c£13 ph. Free parking on site. Hours of work Monday to Thursday 7.15- 15.45 Friday 7.00 - 15.30 Initially this is a temporary ongoing role with the possibility of a permanent opportunity. This role will involve you working in the heart of the company ensuring that all incoming stock is checked and logged accordingly and helping with logistics arrangements for outgoing goods. The role will be varied and busy and you will need to be comfortable going out on the shop floor so previous experience within a manufacturing / engineering environment will be a distinct advantage. You need to be computer literate as the stock is all logged on the computer. Immediate start available. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving,...

Manual Miller / Precision Engineer Location: Marston Green Salary: Up to £19.00 per hour (depending on experience) Job Type: Permanent Hours: Monday to Friday, 07:00 – 16:00 or 06:00-15:00   Experienced Manual Miller Required We are seeking a skilled and experienced Manual Miller to join our specialist precision engineering  to join our client business. This is a varied role focused on the manufacture of high-precision, one-off components and gears. Unlike many machining positions, this is not production or batch work. We require a machinist who can think independently, set up jobs from scratch, and work accurately from engineering drawings. Approximately 80% of the role will involve operating a Bridgeport Manual Milling Machine, with the remaining 20% involving rough machining gears on an Okuma 4-Axis CNC Milling Machine once competency has been demonstrated. The components are typically small and intricate, with most workpieces being under 100mm in size. Key Responsibilities...

Seeking a Manufacturing Engineer. to develop and deliver manufacturing processes for precision machined components across a range of materials. You will play a key part in New Product Introduction (NPI) programs, advising on Design for Manufacture (DfM), PPAP, GD&T, and supporting continuous improvement initiatives. Key Responsibilities Develop and implement lean manufacturing processes focused on quality, cost, and delivery. Create machining processes for complex components with tight tolerances using CAD/CAM tools (Siemens NX or Partmaker preferred). Select cutting tools, design fixtures, and produce shop documentation. Support APQP activities including DFMEA, PFMEA, Control Plans, and MSA studies. Lead and support process improvement projects, ensuring minimal downtime in the machine shop. Review engineering drawings for manufacturability and recommend design changes to enhance productivity and standardisation. Provide technical support to...

Job title: Production Operative Location: Chippenham Pay rate: £13 per hour Hours: Monday to Friday 9am to 5pm Job type: Initial 1 month contract This is an exciting opportunity for a Production Operative to join a leading manufacturing company on a contract basis. The position of Production Operative: Mechanically assembling products Following engineering processes  The role of Production Operative: Previous assembly experience Confident using hand tools Confident following instructions  If you are interested in this Production Operative position, please click apply now or call Molly at Orion Reading today on (phone number removed). Thank you for your application. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website

Maintenance Engineer (Nights - 4 on/4 off) Location: Evesham Salary: Up to £56,500 Shift Pattern: Nights (4 on / 4 off)As a Maintenance Engineer, you will be responsible for maintaining and improving production machinery, ensuring maximum uptime and efficiency across the site. Working closely with the Engineering Supervisor and production teams, you will play a key role in delivering proactive and reactive maintenance support. Key Responsibilities for this Maintenance Engineer Role:  Carry out planned preventative maintenance (PPM), fault finding, and repairs on production equipment Diagnose electrical and mechanical faults and implement effective solutions Support continuous improvement initiatives to enhance equipment reliability and performance Assist with installation, upgrades, and project work across the site Ensure all work is completed in line with health & safety and company procedures Liaise with production and engineering teams to minimise downtime Supervise...

Extrusion Machine Operator (Experienced) The Role We are recruiting an experienced Extrusion Machine Operator to join a busy and well-established manufacturing environment. This is a permanent, day-shift role offering regular hours, enhanced overtime rates, and excellent employee benefits. You will be responsible for operating and maintaining polymer extrusion processes, ensuring consistent quality, efficiency, and safe working practices. Key Responsibilities * Set up, operate, and monitor polymer extrusion lines * Control process parameters to maintain product quality and consistency * Troubleshoot extrusion and process-related issues * Carry out in-process quality checks and inspections * Support continuous improvement and process optimisation * Assist with routine and preventative maintenance * Work closely with production, engineering, and quality teams * Maintain health & safety standards at all times Skills &...