235 jobs found in Llantrisant

CONTRACT VEHICLE TECHNICIAN – PONTYPRIDD Position: Vehicle Technician Location: Pontypridd, South Wales Rate: £21.00 - £22.00 Per Hour (Outside IR35) CONTRACT VEHICLE TECHNICIAN – THE ROLE: We are currently looking for fully qualified Vehicle Technicians to work at our client’s workshop on an ongoing contractual basis. You will be responsible for carrying out service, maintenance and repair work on a wide range of motor vehicles. The contract is outside IR35 and the rate on offer is between £21.00 – £22.00 per hour. CONTRACT VEHICLE TECHNICIAN – SKILLS REQUIRED: * Qualified to Level 3 NVQ/City & Guilds or similar in the relevant disciplines. * Experience carrying out repair and service work to a variety of vehicles. * Ability to diagnose and rectify a wide range of mechanical & electrical vehicle faults. * Knowledge of health and safety practices in the workshop. * UK Driving License and possess your own tools. * Excellent written and verbal...

Production Operator – Pontypool £13.45 per hour | 6-Month Project | £1(Apply online only) Bonus Available | Immediate Start Available Nu Staff are recruiting for Production Operators to join a well-established manufacturing business based in Pontypool. This is a fantastic opportunity to join a busy production environment on a 6-month project running through until December, with structured training, shift allowances, and a potential £1(Apply online only) bonus payment upon successful completion of the project (subject to criteria being met). As a Production Operator, you’ll support the production process by assembling, preparing, fitting, and moving products in line with production schedules and quality standards . Hours of Work Monday to Thursday: 7:00AM – 4:00PM Friday: 7:00AM – 1:00PM Possible Shift Pattern Monday to Friday rotating shifts: 6:00AM – 2:00PM 2:00PM – 10:00PM Pay RatesTraining Period (First 12 Weeks) £12.71 per hour during initial shift training Increasing...

Job Advertisement: Industrial Sewing Machinist Are you experienced in industrial sewing and looking for a new opportunity? We are seeking a reliable Industrial Sewing Machinist to join our team! Position: Industrial Sewing Machinist Location: BS21 Pay Rate: £13.00 to £13.50 per hour Working Hours: - Monday to Thursday: 7:45 AM – 4:30 PM - Friday: 8:00 AM – 12:30 PM Key Responsibilities: - Operating industrial sewing machines to produce high-quality products - Ensuring stitches are consistent and meet quality standards - Maintaining and troubleshooting sewing equipment - Working efficiently to meet production targets Requirements: - Previous experience with industrial sewing machines - Good attention to detail and quality control - Ability to work independently and as part of a team - Knowledge of health and safety standards in a manufacturing environment If you're a skilled sewing machinist seeking a stable role with competitive pay, apply now! To apply or for more...

Machine / Production Operatives Location: Clevedon Contract: Initially 6 months (long-term opportunity / potential to go permanent) Pay: £14.65ph + 17% shift allowance + holiday + pension. Shifts: Rotating Monday to Thursday: 05:50-14:00 & 13:50-22:00 Fridays: 05:50-11:20 & 11:10-16:40 – EARLY FRIDAY FINISH! This exciting role is working for global engineering company with numerous sites in the UK. It’s a hands-on role within a busy engineering production environment, supporting the manufacture of precision components. You will be operating machinery, carrying out quality checks, and ensuring production runs safely, smoothly, and to a high standard. Why apply? This is a great opportunity to expand your skills on high-precision machinery while working for a respected, long-standing manufacturer. The role offers a competitive salary with shift allowance, holiday, and pension benefits. Key Responsibilities * Operating engineering machinery including CNC machines,...

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a Manufacturing Operative for a 12 month contract based in Bristol. Job description - the role Key Responsibilities Prepare, clean, and cast moulds or nozzle guide vanes in accordance with established procedures. Operate small tools and machinery with a high level of precision and care....

Machine Operative Location: Fishponds, Bristol (BS16) Hours: Rotating shifts (6am-2pm / 2pm-10pm), Monday-Friday Pay: £13.35 per hour (paid weekly) Contract: Full‑time, Temp to Perm Industry: Manufacturing About the Role We're working with a well‑established adhesive solutions manufacturer in Fishponds who are looking for a reliable and experienced Machine Operative to join their production team. This is a hands‑on role offering variety, stability, and long‑term progression within a supportive and growing business. Key Responsibilities As a Machine Operative, you will: Check materials and machine settings before each production run Feed materials into machinery and monitor production processes Maintain high quality standards on WIP and finished rolls Operate rewinder machines to provide break, holiday, and sickness cover Clean machinery and prepare materials for upcoming production jobs Safely load and unload vehicles Follow all site Health & Safety procedures...

World Class Defence Organisation based in Bristol is currently looking to recruit a Manufacturing Controller subcontractor on an initial 12 month contract. The role does require the candidate to have Stores / Lineside / Production line experience.  This vacancy does also require the candidate to have or previously held an FLT License.      Job Title: Manufacturing Controller Rate: £25.26 per hour Location: Bristol Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at time and a quarter (25% increase) Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Controller Job Description: The Manufacturing Controller role will involve issue, receipt and management of stores and inventory in a stores environment. Loading, control and monitoring of work packages in a manufacturing environment. Responsibilities: Stock control...

Production Operator £12.71per hour - Temporary work to start immediately - Hours are 6am to 4pm Mon to Thurs (40 hrs per week), 28 days holiday, Pension, Parking - Thornbury, South Gloucestershire. We are recruiting Production / Machine Operators for our successful and expanding manufacturing client based in Thornbury, South Glos. Working as part of a busy team and reporting to the Production Supervisor, you will have previous experience working in a production, distribution or warehouse environment where you are familiar with working to targets. Duties of the Production Worker / Machine Operator will involve Moving pallets and loading materials onto machines Taking finished goods off machine and quality checking them Boxing, packaging and labelling goods Loading onto pallets and preparing for despatch This would suit someone who has previous production or warehouse experience and has a good eye for detail and enjoys working in a fast paced environment. In return you will...

I'm recruiting for an established and successful engineering business in Gloucester who are looking to grow their team. They need a Senior Electronics Technician who's able to fault find, prototype, troubleshoot, assemble, rework and ideally mentor/supervise in a production environment. ROLE: Senior Electronic Technician LOCATION: Gloucester SALARY: up to £55ph (Outside IR35) Skills required for the Senior Electronic Technician are: * Through-hole/surface mount assembly * Electronic fault-finding and troubleshooting * Soldering and rework of PCB's * Wiring harnesses * Report-writing * Supervision / leadership experience The company manufacture products for use in extreme / harsh environments. So any experience in Aerospace, defence, avionics or O&G is particularly helpful. Really successful company with big plans - very exciting time to join! Apply below or get in touch with me for any questions. Cheers, Nathan

Seeking a Manufacturing Engineer. to develop and deliver manufacturing processes for precision machined components across a range of materials. You will play a key part in New Product Introduction (NPI) programs, advising on Design for Manufacture (DfM), PPAP, GD&T, and supporting continuous improvement initiatives. Key Responsibilities Develop and implement lean manufacturing processes focused on quality, cost, and delivery. Create machining processes for complex components with tight tolerances using CAD/CAM tools (Siemens NX or Partmaker preferred). Select cutting tools, design fixtures, and produce shop documentation. Support APQP activities including DFMEA, PFMEA, Control Plans, and MSA studies. Lead and support process improvement projects, ensuring minimal downtime in the machine shop. Review engineering drawings for manufacturability and recommend design changes to enhance productivity and standardisation. Provide technical support to...

Assembly - Gloucester - Temporary with the possibility of going permanent - £13.34 per hour then £14.41 p/h after 12 weeks - 37.5 hour week Working one week 6am til 2pm then the next week 2pm til 10pm - early finish every Friday! We have an exciting opportunity for an experienced Assembler to join a Manufacturing company based in Gloucester. The role's will involve: Assembling products from drawings Using hand tools and glue Inspecting and quality checking to high standards Working to individual and team targetsThe successful Assembler will need to have the following: Good communication skills Previous exposure to a Manufacturing or Engineering environment (working or College) Able to read measurements and diagrams These role will require face to face registrations in the Branch. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we...

Production Operative Winkleigh | Monday to Friday, 8am - 5pm | Full-time | Temporary to Permanent Introduction Acorn by Synergie is currently recruiting for a well-established engineering company based in Winkleigh. This role involves working with fibreglass and resins to produce a variety of products within a busy manufacturing environment. Key Duties: Carry out laminating and tooling across a range of products. Check drawings and production information for accuracy and clarity. Support process improvements to enhance quality and efficiency. Maintain equipment to required standards. Ensure the department is kept clean and tidy. Prepare moulds for production. Use hand and power tools safely and effectively. Requirements: Full UK driving licence due to location. Previous production experience beneficial, although full training will be provided. Good understanding of health and safety procedures. Strong time management and organisational skills. Ability to work independently...

37.5hrs per week. / 5 Day Shift Pattern: 3 Rotating Shifts, No Weekends (Mornings, Nights, Evenings) Morning hours: Mon - Thurs 06:00hrs -14:00hrs, Fri - 06:00hrs -11:30hrs Evening hours: Mon - Thurs 14:00hrs - 22:00hrs, Fri - 11:30hrs - 17:00hrs Night hours: Mon - Thurs 22:00hrs - 06:00hrs, Fri - 17:00hrs - 22:30hrs. Own Transportation Required Our Westbury based client is offering a new opportunity for an individual to join its team as a Machine Assistant. You will need to support and assist the operators in running machinery, ensuring the highest standards of production efficiency and quality. Key Responsibilities * Collaborate with the operator to achieve daily production requirements in terms of quality and quantity. * Optimise efficiency while maintaining operational standards. * Work to targets, ensuring quality control at every step. * Possess a good knowledge of process and product quality standards and maintain accurate documentation. * Demonstrate a keen eye...

Shift Pattern: 3 Rotating Shifts, No Weekends (Mornings, Nights, Evenings) - Morning hours: Mon - Thurs: 06:00hrs -14:00hrs, Fri: 06:00hrs -11:00hrs. - Evening hours: Mon - Thurs:14:00hrs - 22:00hrs, Fri: 11:30hrs - 17:00hrs. - Night hours: Mon - Thurs: 22:00hrs - 06:00hrs, Fri: 17:00hrs - 22:00hrs. Own Transportation Required. To operate sealing and packaging equipment effectively, ensuring products are securely sealed, meet quality standards, and are prepared for distribution in line with company procedures and safety regulations. Key Responsibilities * Set up, operate, and monitor sealing machinery (e.g. heat sealers, bagging machines, or flow wrappers) * Ensure all products are sealed correctly and consistently to required specifications * Perform routine quality checks to identify and address sealing defects or packaging issues * Maintain accurate production records and complete required documentation * Assist with machine changeovers and basic adjustments for...

Job Title: Shift Engineer  Location: Newcastle Emlyn  Job Type: Temp-perm  Salary: Up to £44k per annum depending on experience Hours: Days & Night shifts (every other weekend off) Our client is expanding their operations and needs a reliable, proactive Shift Engineer to help them scale. If you thrive in a fast-paced environment where no two days are the same—transitioning seamlessly from scheduled preventive maintenance to rapid-fire reactive repairs—this is the role for you. This is a truly multi-skilled position. You will take ownership of the safety and performance of specialised dairy processing equipment, requiring a high level of competency in both electrical and mechanical engineering. What you’ll be doing: Executing scheduled tasks as allocated via the IFS Service and Maintenance system. Diagnosing and resolving breakdowns across the plant to minimise downtime. Applying a methodical approach to fault-finding to ensure all repairs are completed ‘Right...

Job Title: Materials Planner Pay Rate: £23.94 PAYE Duration: 12 months Shift: Earlies and lates - 6am - 1:30pm/1:15pm - 9:15pm Location: Cheltenham We are looking for an organised and proactive Material Planner to support manufacturing operations by ensuring the efficient flow and availability of materials in line with production requirements for the Aerospace industry. Key responsibilities include managing material planning activities, monitoring stock and supply chain performance, supporting work-order releases, resolving material-related issues, and contributing to continuous improvement initiatives across the manufacturing environment. Key Skills & Experience Strong communication and organisational skills Ability to work collaboratively within a team Good problem-solving ability and attention to detail Experience using ERP/MRP systems Confident IT skills and knowledge of standard PC packages Previous experience within manufacturing, production planning, or materials...

Manufacturing Quality Technician (Inspection Technician) Location: Worcester Contract: 6-month rolling Hours: 37 hours per week Pay Rates : Inside IR35 PAYE: £18.19 - £20.79 per hour Umbrella: £24.59 - £28.10 per hour Shift allowance: +20% for late shift (TBC) ⏱️ Working Hours Late Shift: Monday-Thursday: 14:30 - 23:30 Friday: 14:30 - 18:30 Day shift option: 07:30 - 15:00 (some flexibility) Role Overview We're looking for a Manufacturing Quality Technician / Inspection Technician to join a growing team in Worcester. This is an exciting opportunity to work in a quality-driven environment using advanced inspection technologies. Key Responsibilities Quality Technician will perform inspection of components using manual and automated methods Measure parts and produce accurate inspection documentation Review reports for completeness, accuracy, and compliance Manage and report non-conformances Use tools such as CMM (PC-DMIS), Zeiss scanners, and manual gauges Document results...

Technical Print Production Operator Opportunity – Swindon Opportunity: An exciting opportunity has been created due to company growth. My client a global pharmaceutical manufacturing company is looking to recruit a Technical Print Production Operator based in Swindon where you will be supporting the technical print team with the day to day running of the digital print machine for drug products. The hours of work are Day Shift / 3 days on and 3 days off / 7.00 am - 7.00 pm. Duties and Responsibilities include: * Hands on manufacturing. * Maintaining and resolving print machinery issues. * Labelling, packaging and dispatch. * Performing visual inspection of finished products. * Working to GMP and EHS standards. * Ensuring adequate and appropriate stocks of equipment and supplies. This is a 12 months contract role based in Swindon which will be reviewed for a possible extension or go permanent however this is all dependent on the candidate and business performance. The...

PE Global is recruiting a Production Operator for our manufacturing client based in Swindon. This is an initial 11-month contract and the rate is £16.37 p/hr. Responsibilities: • Accurately complete documentation related to the encapsulation process. • Operate and maintain up to two encapsulation machines, with cover responsibility for additional machines during breaks. • Perform in-process checks and detailed product quality evaluations. • Monitor material and gel usage, ensuring components are not used past expiry date/time. • Coordinate machine changeovers with crib mechanics and assist with machine tear-down and setup where required. • Troubleshoot equipment issues to maintain production quality and efficiency. • Monitor and replenish solvents, lubricants, and departmental supplies. • Handle and stage tray stacks containing manufactured softgels. • Maintain a clean and safe working environment in line with GMP and site standards. • Handle hazardous, non-hazardous, and DEA...

Cable Harness Technician - Experienced Swindon Temporary to Permanent Full-time Hours:8.00am - 4.30pm - Monday to Thursday with a 1.00pm finish on Fridays Salary is dependent on experience We are currently recruiting for an Experienced Cable Harness Technician to join our client based in Swindon. Position Overview The Cable Harness Technician will play a key role within the Production team, responsible for assembling, testing, and maintaining cable harnesses to the highest quality standards. The ideal candidate will bring a strong technical background, exceptional attention to detail, and a commitment to precision and quality. Key Responsibilities Assembly * Interpret and follow wiring diagrams, schematics, and technical drawings. * Cut, strip, crimp, and solder wires to assemble cable harnesses in accordance with specifications. * Install connectors, lugs, and protective coverings as required by design. Testing and Quality Control * Conduct continuity and...