10 electrical supervisor jobs found

Maintenance Engineer (Nights - 4 on/4 off) Location: Evesham Salary: Up to £56,500 Shift Pattern: Nights (4 on / 4 off)As a Maintenance Engineer, you will be responsible for maintaining and improving production machinery, ensuring maximum uptime and efficiency across the site. Working closely with the Engineering Supervisor and production teams, you will play a key role in delivering proactive and reactive maintenance support. Key Responsibilities for this Maintenance Engineer Role:  Carry out planned preventative maintenance (PPM), fault finding, and repairs on production equipment Diagnose electrical and mechanical faults and implement effective solutions Support continuous improvement initiatives to enhance equipment reliability and performance Assist with installation, upgrades, and project work across the site Ensure all work is completed in line with health & safety and company procedures Liaise with production and engineering teams to minimise downtime Supervise...

Job Role The Test Technician is responsible for the daily testing and verification of products within the Production department, ensuring all activities comply with company procedures, Health & Safety regulations, and environmental standards. The role supports the achievement of production targets by ensuring product quality and reliability. Key Responsibilities Conduct testing of products in line with predefined Acceptance Test Procedures (ATPs). Program and verify PCB assemblies with the correct software revisions. Carry out and set up electrical soak testing where required. Verify incoming pre-programmed PCB assemblies for accuracy and revision control. Support the development and improvement of new and existing test equipment. Review and proofread test procedures (ATP/PATP) before release to production. Validate test equipment and setups prior to production use. Identify and communicate any issues or risks to the Testing Supervisor or Production Manager promptly. Work...

Market 36 Recruitment are currently recruiting for a Cable Assembler on behalf of our client based within a manufacturing environment. This is a temporary to permanent opportunity offering full on-the-job training and the chance to join a busy production team. Roles & Responsibilities * Following written work orders and detailed work instructions * Measuring, cutting, stripping, wrapping and soldering cables * Using a variety of hand tools safely and effectively * Performing electrical insulation and continuity testing * Carrying out visual inspections for cuts, abrasions, dents, scratches, cleanliness and surface finish * Working to daily production demands as set by the department supervisor * Maintaining a high level of cleanliness and housekeeping within the work area * Writing concessions and marking up work orders when required * Following all health & safety procedures including the use of PPE such as gloves, respirators, suits, safety...

Bexley, Greater London Temporary HGV Technician Monday to Friday 45 hours per week Umbrella – up to £38 ph PAYE - £25 ph Questech Automotive Recruitment are recruiting on behalf of one of Europe’s biggest Automotive groups who are looking to recruit for a Temporary Workshop Technician at their Bexleyheath site. We are looking for Technicians/mechanics from a Commercial, HGV, PSV or LGV background with at least 2 years experience in the Industry. You will be Apprentice trained to Level 3 or equivalent that has experience working with a variety of LGV or HGV vehicles. You will be Apprentice trained to Level 3 or equivalent that has experience working with a variety of LGV or HGV vehicles. The role: * Electrical, mechanical and hydraulic fault diagnosis, repair and installation of parts * Setting and operating of machine tools and equipment onsite * Support workshops team members including Apprentice Technicians as required. * Accurately record time to complete...

Good Morning! We are currently recruiting for an Mechanical Technician in Culham, Didcot for a great project, a contract inside IR 35, for 12+ months that is ran by a Public Sector Authority. About the role: As a mechanical technician you would be expected to supervise mechanical fitters and other junior craft effort. Mechanical systems to include vacuum, cooling, pressurised and electro-magnetic. This shall include construction of new systems and maintenance of existing systems including fault finding, and repair. Essential Experience Level 3 NVQ Certificate in Mechanical Engineering (Equivalent qualifications to those stated will be considered). Worked in an industrial setting, specifically mechanical assembly and maintenance Experience of vacuum systems and understanding of electrical work, would be desirable. Knowledge of modern manufacturing techniques. Experience of working under a Written Safe System of Work/Method Statements/Risk Assessments.Interviews will start as...

Good Morning! We are currently recruiting for an C&I Wire Person in Culham, Didcot for a great project, a contract inside IR35, for 12+ months that is ran by a Public Sector Authority. About the role: provide C&I wire person/panel builder support to the facility working across different groups, and on a wide range of control and instrumentation systems. This shall include working both within a workshop environment and on industrial plant to both construct and repair C&I systems, perform bench testing and in-situ fault finding Essential Experience Perform fault finding and repairs to C&I system under supervision, both with and without written test procedures. Provide C&I wire person/panel builder support to Plant Responsible Officers (PROs); Support fault finding and repair work on C&I systems Procure, build, test and commission new plant and equipment (i.e. cubicles, sub racks/assemblies and electronic cards) to defined requirements. Capable of...

Machine Wirer Leicester, LE19 Days Shifts - Early Finish Friday Temporary role £22p/h Umbrella or CIS Are you an experienced Machine Wirer seeking an exciting opportunity in a growing industry? If yes, read on....  I'm excited to share an opportunity with a forward-thinking engineering company that's on the lookout for an experienced Machine Wiring Technician. This is an ideal role for someone who thrives in high-precision environments and has a proven track record in Machine Wiring. The Role - Electrical Fitter: Electrical wiring of new build machines Wide range of electrical fitting duties Supporting with machine assembly, working alongside fitters and engineers Working from wiring schematics Using a variety of hand tools Day Shifts, Early Finish Friday   Minimum Skills / Experience Required - Machine Wireman: Extensive experience in new build machine wiring Strong understanding and experience with schematics Ability to use the required hand tools Have a...

WHAT IS IN IT FOR YOU Temp to Perm opportunity with a global business who is a leader in its industry You will earn £15.64 which will rise again after passing probationary period Daily 8-hour shifts working 5 days a week from Sunday to Thursday 22:00-06:00 Excellent overtime rates with weekend work available subject to business demand Additional benefits will be available directly from the employer should your role go permanent Position is Full time ongoing, so Students should not apply THE BUSINESS Our client is an established manufacturer with roots dating back to more than 150 years. Their growth has been fuelled by innovation and having specialised technological expertise in growing markets producing high value electrical, electronic and digital solutions that improve people’s lives. They have been present in the UK market for over 50 years and have an established manufacturing site in Country Durham. They are a respected local employer with core values focussing...

Building a sustainable tomorrow BAM UK & Ireland are recruiting a site based Fabric Engineer to join our FM Segment of the business and to be based in Castle Donington. Working 40 hours per week between the hours of 8.00am - 5.00pm Monday to Friday. This is a 12 Month Fixed Term Contract. Making Possible In conjunction with common roles the fabric engineer will have full responsibility for the Building fabric status of the site and carry out planned maintenance (PPM) and reactive maintenance tasks as they occur across the site. • Knowledge and experience with building fault finding • Carry out ceiling repair, painting, skirting and facing replacement, door servicing etc. • Identify spare parts to carry out repairs and order through appropriate channels. • Ability to inspect and carryout reactive landscape maintenance tasks in accordance with the project agreement including litter picking. • Carry out building fabric inspections • Inspection and fault finding building...

SW-007-VoidMul-235 Multi-Trader £25 - £26 per hour Working for a maintenance contractor in their voids team Long term temp-to-perm Voids will be located in the Reading area Position good to knows * This is a temp-to-perm role covering a voids contract in the Reading and surrounding areas * A van and fuel will be offered when the role moves to a permanent position so in between time materials will be delivered to site/void you are working in * During the temp period you will only need to get to the location you are working at with your tools, you will not need to carry materials to site * Parking is available at the location you will be working at You will be working for an established Maintenance Contractor within the inhouse maintenance delivery team who carry out repairs, planned works and voids to the organisations extensive housing stock. This role will be working within their voids team covering RG postcodes. **You must have a full...