20 manufacturing operator jobs found

Join a world-renowned aerospace and defence organisation as a Associate Mechanical Operator in RAF Marham on a full time onsite 37 hours compressed over 4 days Due to a drive for greater success, this advanced manufacturing business is currently searching for Associate Mechanical Operator to add to their talented, hardworking team in RAF Marham on an initial 12 months contract. Striving for innovation and creativity you can ensure no two days will be the same. The rate per hour: £28.11 per hour inside IR35 / umbrella The role: * Will carry out metalworking & corrosion remediation activities on aircraft * Role will be working within a close knit team in a multi-skilled / multi-disciplined environment carrying out required repairs and maintenance activities * At this level the post holder is competent to work to basic maintenance instructions, has a working appreciation of the approved data set and works in accordance with the organisation's AMC documentation set Duties: * Act...

Join a world-renowned aerospace and defence organisation as a Mechanical Operator at RAF Coningsby, Lincolnshire on a full time onsite basis Would you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? Due to a drive for greater success, this advanced manufacturing business is currently searching for a Mechanical Operator to add to their talented, hardworking team in Lincolnshire on an initial 12 month contract. Striving for innovation and creativity you can ensure no two days will be the same. This role will be offering £31.34 Umbrella per hour inside IR35 The role: Ensure the effective provision of Part 145 activities by meeting delivery targets and reporting any impact on Continuing Airworthiness. Understand how individual actions contribute to overall delivery performance. Undertake and complete tasked maintenance & diagnostic activities on an aircraft or...

Our client, a large Aerospace and Defence supplier is looking for a Production Test Engineer (Electronics) to join them on a contract basis at their site on Bolton. Due to the nature of the role, applicants must hold the sole British nationality and be eligible to obtain full SC Clearance. 12-month initial contract. £34-£37 p/h Umbrella, inside IR35. Fully onsite in Bolton.As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to...

Our client, a large Aerospace and Defence supplier is looking for a Production Test Engineer (Electronics) to join them on a contract basis at their site on Stevenage. Due to the nature of the role, applicants must hold the sole British nationality and be eligible to obtain full SC Clearance. 12-month initial contract. £32-£36 p/h Umbrella, inside IR35. Fully onsite in Stevenage.As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support...

Electronic Test Operator Initial 12-months Bolton (onsite) £28.35ph, UMB inside IR35 (rising to £29.70ph after 12 weeks) Please note, this role does require SC level Security Clearance and will be working on "UKEO" programmes, meaning the post is only open to sole British nationals due to the nature of work. The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include: Certify the product in line with Product Certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment. Carry out tests on electronic equipment in...

On behalf of our client, we are seeking to recruit a Surface Technology Specialist on an initial 9 -month contract. As the Surface Technology Specialist, you will work on the development, qualification and technical support of the Surface Technologies used for Corrosion Protection, Tribology and other applications of Aircraft airframe. You will join a team of highly motivated and appreciated people to develop and deploy new benchmarks of robust and sustainable Surface Technologies such as high-performance paints and coatings, surface treatments/coatings and sealants. Role: Surface Technology Specialist Pay: £40 per hour Via Umbrella Location: Filton Contract: Monday - Friday 35 hours per week, 9 months IR35 Status: Inside Security Clearance: BPSS Responsibilities Developing and deploying Materials, Processes and Test Technologies for mature design and build Providing corrosion protection, sealing concepts and solutions to enable design, build and operation of aircraft,...

Our client has an opportunity for an Electrical Inspector to join them on a 12 month contract. Role: Electrical Inspector Location: Bolton - fully onsite Clearance: BPSS required to start Hourly Rate: £28.35 per hour via Umbrella, inside IR35 What you'll be doing: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce...

Job Title: SAP Trainer Location: Solihull – FULL TIME ON SITE and REQUIREMENTS TO TRAVEL ACROSS WEST MIDLANDS SITES & LIVERPOOL. Rate: £39.90ph via an Umbrella Company (Inside IR35) or £29.70ph on a PAYE basis Employment Type: Contract (Currently financed until April 2027) Hours: Standard 40 Hours Per Week Reference: J(phone number removed) Position Description: Our automotive client is looking to recruit an experience SAP Trainer is require to support the deployment of the Enterprise Asset Management (EAM) programme., and its critical project SAP Plant Maintenance, which aims to completely transform the way in which the company operates and further enhances their Digital transformation journey. They have a clear vision to deliver a unified end to end process and toolset with connected, traceable data throughout all functions. By enabling employees with the provision of always live data and dashboards, which will allow full focus on true value creation. Key Essential...

Role Title: Production Technician Duration: 6 months contract with potential for Perm Location: Stevenage Rate: £16.00 for 12 weeks then raising to £16.41 PAYE inside IR35 Role purpose / summary The working days and hours are from Monday to Friday and 7.30/8.00 to 4.30/5.00 depending on the needs of the business. Overtime is paid. Your Responsibilities: Undertake the routine manufacturing activities to produce membrane products. Perform daily lab activities including calibrations and checks using appropriate records and logs. Provide support for NPI introduction including method transfer and validation activities. Assist in compliance inspections and EHS program implementation to maintain high level of EHS compliance. Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position. Undertake training in all Q/C processes required for all membrane...

Manufacturing Process Engineer Location: Broughton (Onsite) Contract: 12 months (Inside IR35) Rate: Up to £40.13 per hour (Umbrella) / £30.00 PAYE Hours: 35 per week | Early Friday finish Make an impact in a world‑class manufacturing environment We're recruiting a Manufacturing Engineering Serial Process Engineer to join a leading aerospace production site in the UK. This role sits at the heart of serial production, working closely with Design, Manufacturing Engineering and Shop Floor teams to ensure products are built efficiently, safely and to the highest standards. The role You'll be responsible for translating engineering intent into clear, robust manufacturing processes. This includes creating and maintaining assembly work instructions, supporting live production issues, and managing work preparation activities within SAP. You'll also contribute to process improvements, deviation analysis, and the smooth introduction of new parts and design changes into production. What...

MERITUS are recruiting for a Supply Chain Quality Specialist to join our Aerospace client at their Filton site. SUPPLY CHAIN QUALITY SPECIALIST - INSIDE IR35 - £40 PER HOUR - UNTIL 31/12/2026 - LIKELY EXTENDED - 1 STAGE INTERVIEW PROCESS Role Summary Reporting into senior leadership within New Product Introduction (NPI), this role sits at the intersection of supply chain, quality, and industrial performance. The position is focused on driving supplier maturity, embedding structured quality frameworks, and ensuring robust delivery across complex product changes and work transfers within a high-integrity engineering environment. Key Accountabilities Lead deployment of Advanced Product Quality Planning (APQP) across new product introduction, major modifications, and transfer of work programmes to ensure industrial readiness Develop and elevate capability within the Supply Chain Quality community through coaching and structured upskilling Drive supplier performance through...

On behalf of our client, we are seeking to recruit a Design Concession Approver on an initial 5-month contract. As the Design Concession Approver You will be responsible for leading design investigations and formulating technical solutions for Manufacturing Non-Conformances and Design Investigations ensuring that all Design, Airworthiness and safety requirements are met. Where appropriate you will also liaise with other functions to ensure a fully integrated design solution. Role: Design Concession Approver Pay: £46 - £52 per hour Via Umbrella Location: Broughton Contract: Monday - Friday 35 Hours per week, 5 Months contract IR35 Status: Inside Security Clearance: BPSS Responsibilities You will operate as a lead design engineer and must hold design approval signatory in particular formanufacturing non-conformances (T200). You will also act as a focal point in leading and providingguidance on technical issues and governance and will support technical mentoring for...

SAP Systems Trainer Reference: (phone number removed) Umbrella Rate: £40.03/hr (Inside IR35) Are you passionate about delivering impactful training and want to be part of a transformative journey? This is your chance to join an innovative company as an SAP Systems Trainer and play a pivotal role in shaping the future of digital transformation. With a focus on cutting-edge technology and streamlined processes, this role offers an exciting opportunity to make a real difference in the way this company operates. If you thrive in a dynamic environment and enjoy engaging with people, this could be the perfect role for you. What You Will Do: • Conduct a comprehensive Training Needs Analysis (TNA) to identify process requirements and key stakeholders. • Design and create role-based SAP user training using tools such as SAP Enable Now and Articulate RISE. • Develop engaging training materials, including classroom courses, online modules, videos, simulations, and quick reference...

Our OEM Client based in Solihull, is searching for a SAP Systems Trainer to join their team, Inside IR35. This is a contract position with a proposed end date of 30th April 2027. Umbrella Pay Rate: £39.62 per hour. Position Description: An experienced SAP Trainer is required to support the deployment of the Enterprise Asset Management (EAM) programme, and its critical project SAP Plant Maintenance, which aims to completely transform the way in which the company operates and further enhances our Digital transformation journey. We have a clear vision to deliver a unified end to end process and toolset with connected, traceable data throughout all functions. By enabling employees with the provision of always live data and dashboards, we will allow full focus on true value creation. Essential Skills Required: Experienced SAP user. 5+ years in training creation and delivery. Experience in creating simulation training. Experience and Qualifications Required: The SAP Trainer’s...

Job Description: Quality Inspector Afternoons - Flexible on start and finish times (earlier finish on Fridays) Northampton £28 - ​​​£30 per hour (Inside IR35) The Opportunity: EMBS Engineering is currently recruiting for a CMM Inspector to join a precision engineering company located in Northampton, working on a 3- 6 month contracting basis. Our client is a market leading precision engineering, advanced manufacturing business that specialises in machining complex, medium sized components for highly regulated industries including Motorsport, F1 and Automotive. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: * £28 - £30 per hour Ltd (inside IR35) * Opportunity to work with state-of-the-art machinery - Hexagon CMM’s using PCDMIS * Hours: Afternoons * Flexible on start and finish times Key...

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract.   Experience with inspecting the work of other people is essential.   Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton   Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc....

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Codification Engineer subcontractor on an initial 12 month contract.  The role will be a hybrid position of 1-2 days in office, rest of the week remote.   Candidates from the following fields would be well suited to this role: Configuration Engineer, Engineering Data Engineer, Engineering Data Analyst, Technical Data Engineer, Product Configuration Engineer, ILS Engineer (Integrated Logistics Support Engineer), Supportability Engineer, Defence Logistics Engineer, Logistics Engineer, Supply Chain Engineer (Defence), Codification Engineer, NATO Codification Specialist, NSN Codification Engineer, PLM Engineer, SAP Master Data Engineer, and Configuration/Data Management Specialist within engineering or manufacturing environments. Rate: £45 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote...

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....