13 manufacturing jobs found in Barrow-in-Furness

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Senior/ Lead Planning & Scheduling Practitioner Warton Based (Hybrid 2-3 days per week on site) £56.41/£61.57 an hour Umbrella Inside IR35 12 Month Contract initially. This is a great opportunity to work within one of the UK's leading Defence organisations based In Warton. We have a requirement for a Senior and Lead Scheduler/ Planner, based in Preston between Warton and Samlesbury sites. Some Primavera experience would be preferable, but not essential. There will be a requirement to mentor/ support a junior planner/ scheduler on technical aspects of scheduling, although allocation of daily tasks and Line Management duties will be covered by a BAE Scheduling Lead. Onsite presence within the designated project team will be required 2-3 days a week. Lead the creation and timely update of a Master Construction Schedule for the Building and Infrastructure investment portfolio, including the associated dependencies and enablers, in support of FCAS capability insertion within...

Mechanical Design Engineer (Contract) We are seeking an experienced Mechanical Design Engineer to support ongoing engineering projects onsite at a client manufacturing facility in the North West. This is a hands-on contract role requiring strong CREO expertise and prior experience within the automotive or commercial vehicle sector. The role is primarily onsite and offers flexibility to support different teams and projects across the engineering function as business needs evolve. Responsibilities Deliver mechanical design solutions using CREO (PTC Creo) Support the development of components and systems within automotive and commercial vehicle programmes Work across multiple engineering areas depending on project requirements Collaborate with cross-functional teams including manufacturing, validation, and quality Ensure designs meet industry standards, performance requirements, and manufacturability guidelines Participate in design reviews and continuous improvement activities...

Join a world-renowned aerospace and defence organisation as an Tool Designer Detail Parts in Warton full time onsite Would you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? Due to a drive for greater success, this advanced manufacturing business is currently searching for a Tool Designer - Detail Parts to add to their talented, hardworking team in Warton on an initial 12 months contract. Striving for innovation and creativity you can ensure no two days will be the same. This role will be offering £35.00 PAYE inside IR35 £47.12 UMBRELLA inside IR35 This is a phenomenal opportunity to not only work for a prestigious, advanced organisation, but to gain skills and knowledge you won't find anywhere else. The Role * Conducting tool designs from concept design phase through to manufacture in support of manufacturing demonstration technology development programmes....

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine)...

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract.    Rate: £60.00 per hour Location: Stevenage or Bolton (depending on your preference)   Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeks Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Missile Test Architect Job Description: The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and...

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract.   Experience with inspecting the work of other people is essential.   Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton   Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc....

World Class Defence Organisation is currently looking to recruit a Supplier Planner subcontractor on an initial 6 month contract.  This role could suit a candidate from a MRP Controller, Supply Scheduler or Supply Chain Specialist background. This role is looking for a candidate with the following experience: MRP planning experience and ideally some exposure to SAP Manufacturing environment. Supply chain experience Rate: £27.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite, 2 days working from home Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)                                                                                                                                           Supplier Planner Job Description: This opportunity plays a significant part in...

World Class Defence Organisation is currently looking to recruit a Supply Chain Manager subcontractor on an initial 6 month contract.    Rate: £50.00 per hour Location: Stevenage or Bolton, depending on your preference. Hybrid / Remote working: 2 days onsite per week Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Supply Chain Manager Job Description: An opportunity has arisen for a Supply Chain Manager to join ISP in the Equipment's team. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management. As a team, we work across all programmes in a changing environment, managing and implementing both mature and new technologies. Responsibilities /Skillset/experience required: Internal and external assessment skills/knowledge;...

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract.   This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production...

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract.   Rate: £30.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage onsite Interview Project Officer Job Description: This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established company project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project...