31 engineering jobs found in Solihull

Location: Stafford – Full Time Onsite Contract Length: Until 15 August 2026 IR35 Status: Inside IR35 Pay: £21.52 per hour via Umbrella Key Responsibilities * Perform testing, diagnostics, repair, maintenance, modification, calibration, and manufacture of equipment down to module or component level using approved engineering documentation and techniques. * Carry out planned and ad-hoc advanced repairs using technical documentation, Approved Source Information (ASI) and OEM data. * Support the surveying, refurbishment, and maintenance of Ground Support Equipment (GSE). * Undertake reverse engineering and development activities, including producing engineering documentation and test procedures where required. * Hold responsibilities for self-certification, over-signing, and conditioning of equipment (serviceable, unserviceable, or scrap). * Support the supervision, training, and mentoring of junior technicians and apprentices....

HSE Recruitment are working with a manufacturing business in the Midlands who are looking for an Interim Process Safety professional to support the team on a project. This role sits inside IR35 and day rates will be discussed on a case by case basis. This is likely to be an initial 3 month project with the option to extend or go permanent, depending on your situation. We are open someone working between 3-5 days a week depending on availability. Working under the instruction of the Process Safety Manager you will be supporting on: Hazard Identification & Risk Assessment: Leading studies like HAZOP (Hazard and Operability), HAZID (Hazard Identification), and LOPA (Layer of Protection Analysis) to evaluate risks. Process Safety Management (PSM): Developing, implementing, and maintaining safety management systems and ensuring compliance with regulations. Advice and Guidance across the business Engineering Design Review: Reviewing Process and Instrumentation Diagrams...

Job Description: IT Software Manual Testing Specialist Company: Envisage Recruitment Ltd. Location: Birmingham (Castle Bromwich / Hybrid – 3 days on-site, subject to change) Position Type: Contract (12 Months, Rolling) Rate: £27.04 per Hour (Inside IR35)     Role Overview: As a Senior Professional (P3), you will be responsible for the end-to-end quality assurance of software platforms supporting a major manufacturing capability installation. You will work independently with limited supervision, managing complex testing projects and providing technical leadership to junior QA members and offshore teams.   Key Responsibilities: • Design and build comprehensive test cases, plans, and strategies across multiple software platforms. • Convert manual test preparations into automated scripts to improve lifecycle efficiency. • Deliver high-quality products by executing Regression, Functional, Integration, and End-to-End (E2E) testing. • Facilitate UI, functional, and unit...

Senior Highway Engineer - Roundabouts & Active Travel Design Hybrid Working - 2 days in Birmingham Contract - 6 Months (Potential Extension) £45 - £50 per hour (Inside IR35) 37.5 Hours per Week   We are currently supporting a market-leading organisation in the highways sector that is looking to appoint a Senior Highway Engineer with strong experience in roundabout and active travel design to join their design team on a contract basis. This role will see you playing a key part in the design and development of highway infrastructure, contributing specialist expertise to projects that improve network efficiency, safety, and sustainable travel options.   The Role Working as part of a wider multidisciplinary team, you will take the lead on highway design elements, particularly around roundabout schemes and active travel infrastructure, ensuring designs meet current standards and best practice. You will collaborate closely with engineers, designers, and project...

Role: Assembly Operator Location: Ansty Park, Coventry Duration: 9 months Rate: £18.03/hour Inside IR35: PAYE Swing Shift- 6 am-2pm 2pm-10pm About our client: Our client is a global engineering company specializing in advanced aerospace and defence technologies. They are known for innovation, high-quality standards, and delivering complex solutions for critical programmes. The role: Operate assembly fixtures and associated machinery Set up and changeover of fixtures required for build plan. Guage and measure and record features on products in line with process standards. Maintain and carry out Safety, Quality, TPM and 5 s activity. Attend and support team improvement activity. Follow company policy and procedures. Flexible in working practices at all times. Fill in route cards and any other paperwork clearly as and when required, also updating MRP confirmations. Work at all times in an environment of continuous improvement Work as a team player at all times Inspect and...

Rullion are looking to recruit for the below role: Repairs Engineer ASAP Start Duration - Initially 6 months Rolling contract Inside IR35 £41-43 Per hour Location - Warwick UK. Site based Mainly. Full and Part Time Hours depending on flexiblility Our client an exciting opportunity within the Global Repair Network Team working closely with our external network of MROCs (Maintenance, Repair & Overhaul Centre's) and authorized Repair Vendors. The Repair Engineer (FTC) role within the Repair Network Engineering Team will play a key part in supporting the existing global capability within the Global Repair Network Team as well as future capability developments. Job Description. Support component repair development activities. Assess, investigate and sentence non-conforming components. Support repair scheme amendment/writing and technical variances. Support implementation of improvements & technical solutions (internally & externally). Represent engineering in the...

Change & Comms Analyst 6-month initial contract Based in Gaydon (hybrid working) £34.80 per hour (Inside IR35), 40 hrs pw *Applicants MUST have proof of immediate, on-going and valid eligibility, to work full time, and travel within, the UK* About the company I am currently recruiting on behalf of an automotive OEM, based in Gaydon, who are looking for a Change & Comms Analyst to join their team. Job Description As Change & Comms Analyst, your main responsibilities will include: Develop and deliver internal communications, that support programme. Support creation of change impact assessments, stakeholder maps, etc. Check and monitor business readiness ahead of implementations, integrations, etc. Coordinate and deliver engagement activities (e.g. workshops, etc.). Track and respond to employee sentiment (e.g. EMPS, verbatim feedback). Qualifications/Skills needed: Has conducted change impact assessments and segmented audiences. Has authored a communications...

Procurement Specialist Reference: (phone number removed) Umbrella Rate: £33.91/hr (Inside IR35) 12 months maternity cover Are you ready to take your career to the next level? Join a forward-thinking company as a Procurement Specialist and become a vital part of a dynamic and innovative team. This role offers the opportunity to work on impactful projects, develop your expertise, and make a real difference in a company that values excellence and professionalism. If you have a passion for procurement and are looking for a role that challenges and inspires, this could be the perfect opportunity for you. What You Will Do: • Source goods and services required for both direct and indirect operations, ensuring optimal quality and cost. • Conduct supplier selection processes and negotiate pricing and terms to achieve favourable outcomes. • Manage order processing and oversee contract administration efficiently. • Monitor and evaluate supplier performance, maintaining strong and...

CNC Turner (Weekend Shift) Location: Leamington Spa (On-site) Length: 6 month contract (inside IR35) Salary: * Contract: £24.56 per hour (inclusive of 30% weekend shift premium) Syntech Recruitment are currently recruiting for a CNC Turning Technician on behalf of a high-precision engineering organisation based in Leamington Spa. This role will support small-batch CNC turning of high-specification transmission components used within demanding engineering environments including motorsport and aerospace. This is a weekend shift position, operating Friday to Sunday with 12-hour shifts, commencing March 2026. CNC Turner Responsibilities * Manufacture precision components using CNC turning machines in line with engineering drawings and production route cards. * Ensure components are produced to the highest quality standards within allocated production times. * Read, interpret, and adjust CNC programmes, including optimisation of speeds and feeds where required. *...

We have a fantastic Monday to Friday DAYS ONLY opportunity available for a Multiskilled Maintenance Engineer on a fixed term contract. The role is based near to the Aldridge area so ideal for those based in Birmingham, Litchfield, Tamworth, Wolverhampton and surrounding areas. The position is working with an internationally respected manufacturer who have multiple sites across the UK. The role that offers further development, training and upskilling. What's on offer as a Multiskilled Maintenance Engineer: Monday to Friday DAYS ONLY 8am-4pm Or alternatively Monday to Thursday 8am-6pm Salary up to £25-£28 Hourly Rate (Inside IR35) 40 average Hours Per Week Industry leading multinational business The ability to work with a team of skilled engineers across maintenance and project engineering activities. Key responsibilities of Multiskilled Maintenance Engineer: Responsible for Electrical and Mechanical breakdowns, fault finding & repairing manufacturing machinery - Process...

Job Title: Laboratory Tech Analysis - Technician (Metallurgy and Materials) Location: Wolverhampton EMC (WV9 5GA) Rate: £21.88ph via an Umbrella Company (Inside IR35) or £16.42 on a PAYE basis Employment Type: Contract (Financed until September 2026) Hours: Standard 39 Hours Per Week Monday to Friday, over alternating 2 shifts. Early shift 06:00 - 14:00 (M-T), 06:00 - 13:00 (F). Late shift 14:00 - 22:00 (M-T), 13:00 - 20:00 (F). Duties: * Use metallurgical & mechanical preparation and test equipment to assess components according to standard test processes, as required by engineering specifications or drawings. * Carry out routine quality control testing for EDU, Battery and Frame Assembly. * Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. * Perform visual weld inspection testing and ultrasonic testing of spot welds. * Use optical microscopes to measure welds, rivets and porosity content. * Perform radiographic analysis of...

Seeking two Quality Inspectors to be based on-site supporting an independent product inspection program, on-site at a customer program in Wolverhampton. Duration: 4 weeks (possible extension) Pay rate £35 p/h Travel and mileage paid Location: Wolverhampton The desired candidates will have previous experience in working in an Aerospace inspection role, undertaking inspection activity in line with engineering drawings, customer purchase order requirements, industry standards and specifications. Candidates will have a diligent approach to inspection, looking for known and unknown defects. Minimum 3 years quality inspection experience within an aerospace environment. Experience within the manufacturing environment, performing goods receipt and/or final inspection - gears experience is highly desirable. Strong experience with product quality & supporting paperwork checks (CofC, manufacturing paperwork et cetera) in accordance AS9100 and with business processes. Experience...

Lab Technician 6-month initial contract Based in Wolverhampton (onsite working) £21 per hour (Inside IR35), 39 hrs pw *Applicants MUST have proof of immediate, on-going and valid eligibility, to work full time, and travel within, the UK* About the company I am currently recruiting on behalf of an automotive OEM, based in Wolverhampton, who are looking for a Lab Technician to join their team. Job Description As Lab Technician, your main responsibilities will include: Use metallurgical & mechanical prep & test equipment, to assess components Carry out routine quality control testing for EDU, Battery and Frame Assembly Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. Perform visual weld inspection testing and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets and porosity content. Qualifications/Skills needed: Prep equipment (e.g. bandsaws, abrasive cutters, grinding, polishing, etching). Materials...

Job title: Test Technician (Metrology) (B) Location: Wolverhampton Duration: 6 Months (rolling) Hourly rate: £21.88ph INSIDE IR35 (Via Umbrella Solutions) Heads are required to work 39hr working week. M - F, over alternating 2 shifts. Early shift 06:00 - 14:00 (M-T), 06:00 - 13:00 (F). Late shift 14:00 - 22:00 (M-T), 13:00 - 20:00 (F). POSITION DESCRIPTION: Use metallurgical & mechanical preparation and test equipment to assess components according to standard test processes, as required by engineering specifications or drawings. Carry out routine quality control testing for EDU, Battery and Frame Assembly. Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. Perform visual weld inspection testing and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets and porosity content. Perform radiographic analysis of components. Support investigation of product quality issues with cross functional teams. Ensure...

We have a contract opportunity working for Luxury Automotive OEM based in Gaydon, Warks Please review details below Job title: Suspension Engineer (C) Location: Gaydon Duration: 12 months Hourly rate: £27.21 p/h INSIDE IR35 (Via Umbrella Solutions) Duties: Apply engineering theories and principles to perform complex work in research and development of suspension engineering systems, including the design, characterization, and iterative refinement of suspension devices. Work with powertrain engineering to develop industrialized products. Level: A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities typically include: * Managing projects / processes, working independently with limited supervision. * Coaching and reviewing the work of lower-level professionals. * Problems faced are difficult and sometimes complex. If you want to know more about this exciting contract...

We have a rolling contract opportunity working for Luxury Automotive OEM based in Gaydon Please review and APPLY Job title: Human Factors Engineer (D) Location: Gaydon Duration: 12 months Hourly rate: £33.88ph INSIDE IR35 (Via Umbrella Solutions) POSITION DESCRIPTION: Duties: * As modern vehicles evolve, JLR's customers are experiencing and interacting with vehicles in new and innovative ways. * We are looking for an enthusiastic individual to join our Human Factors Ergonomics team to deliver our customer requirements for our future vehicles. * This role is ideally suited to a skilled individual with a background in Human Factors, Ergonomics, Anthropometrics, Product Design or Design Engineering. Key duties include, but not limited to: * Lead development of Human Factors requirements, in order to deliver the best customer experience. This will include collaboration with key stakeholders around the business including Engineering, Design, Programme, Commercial and...

Durability and Reliability PAT Leader - (phone number removed) - £27.21/hr umbrella rate Are you ready to take your career to the next level with an exciting opportunity in the automotive industry? This role offers a chance to work on innovative projects, develop your expertise, and contribute to the creation of world-class vehicles. If you're passionate about engineering and customer satisfaction, this could be the perfect opportunity for you. What You Will Do: - Lead the Durability and Reliability (D&R) Performance Attribute Team (PAT) to ensure customer expectations for vehicle robustness are met or exceeded. - Set and manage attribute targets, leveraging both virtual and physical test methods to validate and sign off on designs. - Develop and execute detailed Design Verification (DV) plans, ensuring timely delivery of results and accumulating evidence for vehicle programme sign-off. - Collaborate with system and component teams to define and maintain cascaded target...

Internal Communications & Engagement Specialist Certain Advantage are hiring on behalf of our globally renowned brand for an internal communications specialist to take responsibility for shaping and delivering a clear, engaging, and strategically aligned communications approach across an internal business function. This is a contract position inside IR35. The role is important and ensures employees are informed, connected, and equipped to support priorities, while strengthening culture and engagement through consistent messaging and strong cross-functional collaboration with their stakeholders and business partners, including IO Communications, and Senior Leadership. You’ll be expected to review and refresh the communications strategy and stakeholder map, measuring impact through feedback. You’ll be expected to deliver communication products on time and to quality standards, ensuring plans and events are delivered to agreed timelines. Key Accountabilities and...

Laboratory Technician (Metallurgy) Based in Wolverhampton 6 Month Contract Shift Work : 39 hour working week. M - F, over alternating 2 shifts. Early shift 06:00 - 14:00 (M-T), 06:00 - 13:00 (F). Late shift 14:00 - 22:00 (M-T), 13:00 - 20:00 (F). £21.95 per hour Inside IR35 (Umbrella Rate) Duties: * Use metallurgical & mechanical preparation and test equipment to assess components according to standard test processes, as required by engineering specifications or drawings. * Carry out routine quality control testing for EDU, Battery and Frame Assembly. * Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. * Perform visual weld inspection testing and ultrasonic testing of spot welds. * Use optical microscopes to measure welds, rivets and porosity content. * Perform radiographic analysis of components. * Support investigation of product quality issues with cross functional teams. Skills: * Experienced in using preparation equipment...

Location: Wolverhampton EMC Rate: £21.88ph via an Umbrella Company (Inside IR35) or £16.42 on a PAYE basis Employment Type: Contract (Currently financed until September 2026) Hours: Standard 39 Hours Per Week Reference: J(phone number removed) Duties: Use metallurgical & mechanical preparation and test equipment to assess components according to standard test processes, as required by engineering specifications or drawings. Carry out routine quality control testing for EDU, Battery and Frame Assembly. Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. Perform visual weld inspection testing and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets and porosity content. Perform radiographic analysis of components. Support investigation of product quality issues with cross functional teams. Ensure internal and external audit compliance to standards including IATF 16949 and ISO 14001. Compliance to Health...