15 manufacturing operator jobs found

Quality Inspector 6 month contract Based in Belfast Offering £31.90ph Inside IR35 Do you have experience with Quality Control Requirements? Have you completed an Electrical or Mechanical Apprenticeship? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Quality Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Carrying out Inspection, Quality Control, and Quality Assurance Functions Ensuring product compliance with design specification, customer, and approving authority requirements and regulations Providing instruction and advice to operators Monitoring the Delegated Operator Scheme Writing technical reports to highlight drawing, process,...

Our client has an opportunity for a Technical Incoming Inspector to join them on a contract basis until November 2026. You will be carrying out Inspection, Quality Control and Quality Assurance Functions. Role: Technical Incoming Inspector Location: Belfast - fully onsite Hours: 36 per week Clearance: BPSS required before starting Hourly Rate: £31.90 per hour via Umbrella, inside IR35 What you'll be doing: Carrying out Inspection, Quality Control and Quality Assurance Functions. Ensuring product compliance with design specification, customer and approving authority requirements and regulations. Providing instruction and advice to operators as and when required. Monitoring the Delegated Operator Scheme. Working flexibly in groups. Writing technical reports to highlight drawing, process and tooling anomalies to instigate investigation and corrective action.Requirements: Applicants must have completed a recognised electrical or mechanical apprenticeship and have a minimum of 2...

Electrical Calibration Operator 12-Month Contract Based in Bolton Offering £28.35ph Inside IR35 Apprenticeship required - Electrical/Electronic Do you hold an Electrical/Electronic Apprenticeship? Do you have experience conducting calibrations on instruments? Do you want to work with an industry-leading company? If the answer is yes to these, then this role could be for you. You will be working as the Electrical Calibration Operator with a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be a key member of the Manufacturing function within the business where you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role will not be working with products so it is not essential you have...

Janauary 2026 Starts Maintenance Engineer - Electrical / Mechanical / Multi Skilled Location: West Midlands Shifts available: - Days - Double Days - 3 Shift Rotation - 4 Shift Rotation Contract: 6 Months Temp-to-Perm ------These roles are inside IR35------ The Role: We are looking to recruit several Multi-Skilled / Electrical or Mechanical Maintenance Engineers from a conveyor, automated, or fast-paced environment and you will be responsible for ensuring that all production and ancillary machinery, equipment, and power systems operate at maximum efficiency. You must have good electrical or mechanical skills and have prior experience working within a production maintenance capacity. Key Performance Indicators - Equipment reliability and performance - Plant Maintenance (TPM & PPM) Qualifications and Experience - Ideally you will have xxperience with automotive machinery maintenance and fault diagnoses - Mechanical / Electrical / Pneumatics experience - Indentured...

Electrical Inspector - 2826-1 12-month initial contract - likely to be extended £28.25ph, UMB, inside iR35 (rising to £29.70ph after week weeks) Onsite in Bolton BPSS clearance only Due to the nature of the programme the successful contractor must be a sole British national. Essenitial Qualifications: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 Vocational NVQ3 with Further Education, BTEC ONC/HNC The Role: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical...

Job Description: Quality Inspector Afternoons - Flexible on start and finish times (earlier finish on Fridays) Northampton £28 - ​​​£30 per hour (Inside IR35) The Opportunity: EMBS Engineering is currently recruiting for a CMM Inspector to join a precision engineering company located in Northampton, working on a 3- 6 month contracting basis. Our client is a market leading precision engineering, advanced manufacturing business that specialises in machining complex, medium sized components for highly regulated industries including Motorsport, F1 and Automotive. Due to the nature of the markets our client supplies into, all candidates must be UK residents, and DBS checks will be required. Please note we cannot offer visa sponsorship for overseas candidates. Key Benefits on offer: * £28 - £30 per hour Ltd (inside IR35) * Opportunity to work with state-of-the-art machinery - Hexagon CMM’s using PCDMIS * Hours: Afternoons * Flexible on start and finish times Key...

Janauary 2026 Starts Maintenance Engineer - Electrical / Mechanical / Multi Skilled Location: West Midlands Shifts available: Double Days (54K) and 3 Shift Rotation (57K) Contract: 12 Months Temp-to-Perm ------These roles are inside IR35------ The Role: We are looking to recruit several Multi-Skilled / Electrical or Mechanical Maintenance Engineers from a conveyor, automated, or fast-paced environment and you will be responsible for ensuring that all production and ancillary machinery, equipment, and power systems operate at maximum efficiency. You must have good electrical or mechanical skills and have prior experience working within a production maintenance capacity. Key Performance Indicators - Equipment reliability and performance - Plant Maintenance (TPM & PPM) Qualifications and Experience - Ideally you will have experience with automotive machinery maintenance and fault diagnoses - Mechanical / Electrical / Pneumatics experience - Indentured Apprenticeship or a...

We're supporting an innovative automotive client who are seeking a dynamic Senior Contracts & Procurement Specialist to support a broad portfolio of CAPEX, category management, logistics, MRO, and other key procurement activities. Role: Senior Contracts & Procurement Specialist Duration: 9 - 12 Months Rate: £400 - £500 p/day (Inside IR35) Location: Oxfordshire (2/3 days on-site) In this role you will be involved heavily with pre‑contractual activity on a large project, while also providing flexible support across a range of procurement categories. Key Responsibilities: Lead pre‑contract activities for a large-scale, high‑value procurement workstream. Support supplier selection for system manufacturing. Draft and negotiate framework agreements and detailed supply orders (system assembly, aftermarket parts). Negotiate bespoke terms including warranty, delay damages, performance criteria, and commercial risk. Collaborate cross‑functionally with engineering, quality, legal,...

Production Operative Glascoed 37 hours per week 12 Months Inside IR35 Our client BAE Systems are currently recruiting Production Operators to play a crucial role in various areas on the shop floor at their Glascoed site. This position involves operating a diverse array of equipment, from machinery to mobile work tools, and involves manual handling in alignment with set Standard Operating Procedures, quality standards, and comprehensive risk assessments. The role is focussed specifically on following the Manufacturing instructions & following the guidance of the Cell Leader. Role Responsibilities • Follow site safety procedures and wear necessary protective gear. • Engage in audits and discussions to maintain a safe work environment in line with regulations. • Ensure work meets quality standards set for the process. • Accurately document work-related data to enhance process improvement. • Manage inventory effectively to minimise waste and handle...

Our client has an opportunity for a Techbical Shopfloor Engineer to join them on a contract basis until July 2026. You will be accompanying the production team in identifying and analysing technical issues. Role: Technical Shopfloor Engineer Location: Broughton, Flintshire - fully onsite Hours: Alternating weeks of mornings and afternoons: Monday to Friday Mornings - 6:00am - 1:10pm / Afternoons - 1:30pm - 8:40pm Clearance: BPSS required to start Hourly Rate: £36 per hour via Umbrella, inside IR35 + a 20% shift uplift What you'll be doing: Accompany the production team / Autonomous Production Team (APT). Supports in identifying, analysing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM). Provides an E2E perspective at the shopfloor level within the production team / APT. Supports continuous production enablement by efficiently utilising available resources & knowledge Contributes to the Operational Excellence targets...

Would you like to join our leading client who prides themselves on achieving operational excellence? -Do you want to work for one of the World’s most famous Car manufacturers driven by a team of highly competent automotive specialists based in the West Midlands? -Are you experienced in Materials, Planning and Logistics? If your answer is “yes,” we have the perfect job opportunity for you just here.. The Opportunity Due to successful project growth, our leading client, a World recognised and respected Automotive OEM Manufacturer based in rural Warwickshire, are actively seeking an experienced Material Planner to join their highly successful team with immediate effect on a 3-month rolling on-going Contract basis (Inside IR35). On offer to you, is a competitive, albeit negotiable hourly rate, based on relevant experience. The Role As the Material Planner, your role is to schedule and control the supply of components/materials to meet immediate production requirements and forward...

Mechanical Inspector 12 Month Contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Mechanical Inspector? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Mechanical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Certify the product in line with the product certification procedure Examining for correct assembly Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc... Inspect for physical damage Inspection checks non-product certification Monitor product certification operators Check and complete all paperwork associated with the manufacturing data pack Control...

Contract Maintenance Engineer South Nottingham | Food Manufacturing | Day & Night Shift Contract We are recruiting for a Contract Maintenance Engineer to join a busy food manufacturing site in South Nottingham. You will provide engineering support to production, carrying out both reactive and planned maintenance to ensure plant and equipment operate at maximum efficiency. This is an opportunity to join a modern, well-invested manufacturing facility operating within a busy and fast-paced production environment. The Role: Multi-skilled Contract Maintenance Engineer (electrically biased) Reactive and proactive maintenance across plant, equipment and auxiliary systems Support production to minimise downtime and maximise efficiency Ensure planned engineering tasks are completed on time and in full Maintain high standards of repair and manufacturing practice Complete planned maintenance documentation and CMMS records Contribute to cost reduction and continuous improvement...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract.   Experience with inspecting the work of other people is essential.   Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton   Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc....