11 jobs found in Arnold

A leading UK-based engineering and manufacturing organisation is seeking an experienced Electrical Engineer to deliver technical projects across multiple sites. This business operates in a highly regulated, electrically intensive environment, focusing on energy efficiency, infrastructure upgrades, and building services improvements. The role is predominantly remote, with travel to sites included. Key Requirements Proven experience delivering projects in an electrical engineering or M&E environment Recognised electrical qualifications (essential) Strong knowledge of energy conservation / energy efficiency initiatives Hands-on experience with electrical systems, power distribution, and control systems Ability to manage subcontractors, programmes, costs, and on-site activities Confident working autonomously and remotely, with regular site visits Contract Details Outside IR35 £30-£35 per hour (depending on experience) Minimum 6-month contract with clear scope to extend...

Composite Laminator – Contract (Outside IR35) Location: Nottingham Rate: Up to £23 per hour Contract Length: 1–3 months Hours: Monday – Friday A well-established composites manufacturer in Nottingham is looking for an experienced Composite Laminator to support production on a short-term contract. Key responsibilities: Hand lay-up of composite components (pre-preg and/or wet lay-up) Working to engineering drawings and lay-up schedules Vacuum bagging and preparation for cure Producing high-quality components to tight tolerances Adhering to quality and health & safety standards Requirements: Previous experience as a composite laminator Background in motorsport, aerospace, automotive or high-quality composites Strong attention to detail and ability to work independently

Are you an Electrical Design Engineer specialising in EPLAN design looking for your next contract opportunity? If so, please take a look at the opportunity below.... Electrical Design Engineer Nottingham (hybrid - 3 days per week in the office) £42-£46 per hour Outside IR35 6 month initial contract Essential Skillset: - 5+ years experience as an Electrical Design Engineer - Strong proven working experience with EPLAN pro panel software - Experience within Renewables or Food and Beverage sectors - Familiarity with PLC Controls and programming If this position is of interest, please get in contact with Alex Hooton at JAM Recruitment as soon as possible

Data Engineer | Outside IR35 | £400 - £500 | 6 months | Hybrid Nottingham  We’re looking for a highly skilled Data Engineer to join a growing data team supporting a large-scale modern data platform project. Working 3 days a week onsite on the outskirts of Nottingham, you'll be a key contributor in evolving the organisation’s data capability, focusing on best‑practice engineering, clean architecture, and high‑value BI delivery. Key Responsibilities Design, build and optimise ETL/ELT pipelines using Azure Data Factory and Databricks. Develop scalable data models and transformations using SQL and Python. Work hands‑on with Databricks (Lakehouse, Delta tables, notebooks, workflows). Deliver high-quality dashboards and reporting solutions using Power BI. Implement best practices for data quality, governance, lineage and automation. Collaborate with cross‑functional teams including analysts, product owners and business stakeholders. Support performance tuning, cost optimisation and...

Position: Mechanical Design Engineer Location: Castle Donington - Hybrid Contract: Outside IR35 Type: Full-Time The Role This is an outside IR25 assignment expected to last between 6 - 12 months with the successful contractor involved in the design of a range of fabrications and components used in turbomachinery applications. Key Responsibilities: Create detailed 3D models and assemblies using Siemens NX. Generate engineering drawings Perform engineering design calculations eg Perform tolerance stack-up analysis , bolted joint. Preparation of engineering design reports Engage with suppliers and lead design for manufacturing activities Ensure designs meet industry standards, customer specifications, and regulatory requirements. Required qualifications and experience: Bachelor's degree in Engineering. Experience designing castings, machined parts and fabrications. Experience using BS8888 and/or ASME Y14.5 Proficiency in NX software. Strong skills in mechanical...

Technical Manager – Fire and Gas Systems 12-Month Contract – Outside IR35 Hybrid – 3 Days Onsite (Derby) Role Overview We are seeking an experienced Technical Manager – Fire and Gas Systems to support gas turbine installations, leading the specification, integration, compliance, and commissioning of fuel gas detection, oil mist detection, and fire detection/suppression systems within turbine enclosures and existing fire protection infrastructure. Key Responsibilities * Lead requirements validation and technical specification for gas detection, oil mist detection, and fire detection systems. * Conduct risk and hazard assessments (HAZOP, risk mitigation). * Collaborate with enclosure design suppliers to optimise sensor placement and minimise stagnation zones. * Oversee supplier selection, certification, installation, commissioning, and system validation. * Ensure compliance with relevant standards (NFPA, IEC, ISO, ATEX). * Support audits,...

Registered Building Inspector (Class 2 RBI+) Location: Derbyshire Contract: 6 month rolling contract | Outside IR35 Available Rate: £60–£70 per hour Hours: Full-time (part-time considered) A new opportunity has arisen for an experienced Building Control Surveyor / Registered Building Inspector (Class 2A+) to join our client’s team across the Derbyshire area on a 6 month rolling contract, with strong potential to move onto a long-term contract after the initial period. The Role: You will deliver Building Regulations plan checking and site inspection services across a range of domestic and/or commercial projects (RBI grade dependent) Key Details: • £60–£70 per hour • 6 month rolling contract with strong extension potential • Outside IR35 Available • Full-time role with part-time flexibility available Apply: For more information, please contact Ben Johnston: Senior Recruitment Consultant – Building Control: (phone number removed) Alternatively, click Apply and, if shortlisted,...

Job Title: Electrical Technician Location: Midlands Rate: £25 - £30 per hour - OUTSIDE IR35 Shifts: Days or Nights 4 on 4 off About the Role We’re looking for electrically qualified technicians to support dynamic testing, fault identification, and system performance validation of rolling stock. As the electrical technician you will be responsible for testing phases, working alongside engineering, testing, and commissioning teams to ensure the fleet is reliable, compliant, and ready for full passenger operation. Key Responsibilities * Monitor system performance in real time * Perform fault-finding and diagnostics on electrical, mechanical, and software-integrated systems * Liaise with engineering, testing, and depot teams to log, report, and escalate issues during dynamic testing and early service rollout * Conduct basic corrective actions and support deeper root-cause investigations * Capture detailed technical data and support the continuous...

Digital Business Analyst | £400–£450 | Outside IR35 | 6 Months | Onsite/Hybrid East Midlands   We’re recruiting for an experienced Digital Business Analyst for a 6‑month contract with the view to extend. This role is Outside IR35 and requires 4 days per week onsite in Derbyshire (non‑negotiable).   You will play a key role in one of our client’s major digital transformations. Sitting within the product team, you’ll support business analysis across a large‑scale digital programme covering web/mobile applications, legacy system evolution and CRM.   Key Requirements Proven experience delivering Digital, Software or Product‑focused Business Analysis with consistent project success Background in large‑scale transformation ideally involving web, mobile, legacy applications and core business systems like CRM/ERP Strong stakeholder engagement skills, translating technical requirements effectively across varied cross‑functional delivery teams Collaborative experience with Product,...

Mechanical Design Engineer Location: Derbyshire Rate: £40 - £42 per hour (Ltd – Outside IR35) Contract: 3 – 6 month initial contract – likely to extend Immediate Start Our client is looking for an experienced professional to take a lead role in managing the full design process—from initial concept through to final delivery. This is a unique opportunity to contribute to high-impact projects within a fast-paced, collaborative engineering environment. You'll use tools like CAD and advanced engineering software to validate calculations, support testing, and oversee project execution, working closely with cross-functional teams to ensure quality, efficiency, and client satisfaction at every stage. What Our Client is Looking For: A hands-on background in fabrication and structural engineering Proficiency in engineering calculations – using Mathcad, Excel, and hand calculations Expertise in acoustics, airflow, and thermal systems Experience with both large and small companies,...

Who Our client is a leading, independent manufacturer of composite and GRP products producing pattern work, tooling and final components across industry from the worlds of Formula One, automotive, engineering, marine, aerospace, rail and more. What With an ever increasing order book our client now requires an experienced CNC Programmer to join the team 4 on 4 off basis. The ideal candidate will have experience programming in Hypermill for 3 and 5 axis machines using siemens controls. (Hurcos & Belotti). Key skills: * Previous 3 & 5 axis experience * Previous experience of programming Hypermill * Setting and operating machines. * Machining fixtures and cradles. * Experience of machining parts for the motorsport and automotive sectors. * Experience of machining a wide range of metallic, polymers, composite parts. * Be comfortable hand finishing parts and patterns in between machining operations. * Experience of machining complex multi-part patterns and mould...