26 manufacturing jobs found in Bolton

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 2x Manufacturing Controller subcontractors on an initial 12 month contract.   This role requires someone with Stores experience within a manufacturing environment.    Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph.  Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half.   Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Manufacturing Controller Job Description: The Manufacturing Controller role will involve issue, receipt and management of stores and inventory in a stores environment. Loading, control and monitoring of work packages in a manufacturing environment. Responsibilities: Stock control / storekeeping including shelf life control. Loading the manufacturing cells with the requisite jobs in accordance with...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Manufacturing Controller subcontractor on an initial 12 month contract. This role requires someone with Stores experience within a manufacturing environment.  Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph.  Overtime hours (over 37 hours) are at normal hourly rate plus 50% Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a half.   Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Manufacturing Controller Job Description: The Manufacturing Controller role will involve issue, receipt and management of stores and inventory in a stores environment. Loading, control and monitoring of work packages in a manufacturing environment. Responsibilities: Stock control / storekeeping including shelf life control. Loading the manufacturing cells with the requisite jobs in accordance...

Manufacturing Engineer (Assembly and Integration) Bolton £35 per hour initially 12 months 1-stage interview Mon-Fri Certain Advantage is working in partnership with a large engineering company that operates within the aerospace industry and is currently seeking an experienced Manufacturing Engineer. As a key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing.   What will you be doing? Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEAs, FAIs etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support the Non-Conformance Process using SAP.  A couple of things you should know: Formal...

Our client, a trusted partner of the UK Ministry of Defence, is looking for a detail-focused General Operator to join their cutting-edge manufacturing team. This role is ideal for candidates with experience in microelectronics assembly, particularly those confident working under a microscope with extremely small components. You'll be part of a high-performing team supporting the production of advanced missile systems, with a focus on precision soldering and assembly of circuit card components. If you have a steady hand, a sharp eye, and thrive in a cleanroom-style environment-this is for you. Key Responsibilities: Assembling and soldering microelectronic components under a microscope Following detailed manufacturing instructions and quality standards Supporting sub-assembly and certification processes Working across departments including PEC/CCA, looming, plastics, and stores Ensuring compliance with health & safety and ESD protocols Tentatively work across several...

Our client has an opportunity for a Goods in Inspector to join them on a contract basis for 12 months. You will be ensuring the goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods In Inspector Location: Bolton Hours: 37 per week Clearance: full SC required before starting Hourly Rate: £28.35 per hour via an umbrella company, inside IR35 What you'll be doing: The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and...

Administrator Bolton £18 per hour PAYE 12 Months   Advantage Resourcing are working in Partnership with a Large manufacturing company who work within the Defence Industry. We are seeking a strong Administrator to work a range of administrative and clerical duties within an Engineering department. This is a position for an experienced administrator with a detailed understanding working in a Manufacturing / Engineering environment.   Core Duties Some experience in a clerical role within the Business Support function Strong attention to detail. MS Office - Proficient in using Word, Excel and PowerPoint to generate technical material. Supportive, helpful approach and a calm and professional manner, even when under pressure. familer of budgetary management (would be useful.) SAP (would be advantageous but not essential.)  Functional Knowledge Some experience in a clerical role within the Business Support function Can use Microsoft Office software comprehensively Carries out assigned...

Technical Administrator 12 month contract Based in Bolton Offering up to £24.19ph Inside IR35 Do you have an understanding of asset management principles and systems? Do you have experience carrying out costing activities? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Technical Administrator, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing technical administration support to the Environmental Stress Screening (ESS) and Mechanical Team Updating and controlling company equipment records, including archiving and transfer activities Carrying out costing activities alongside ESS engineers Supporting the ESS & Mechanical team by...

Production Operative – Bolton (BL6) Pay: £12.21 per hour (basic) Overtime: £18.32 per hour Hours: 7:00am – 3:30pm, Monday to Friday Pay increase after 12 weeks of service Overview We are recruiting Production Operatives for a well‑established manufacturing business in Bolton. This role involves operating machinery, supporting warehouse operations and ensuring high product quality through strict production processes. Key Responsibilities Production Operate production machinery and equipment. Follow product specifications, work cards and production plans. Maintain excellent product quality. Keep accurate production and material records. Warehouse Assist with loading and unloading raw materials and finished goods. Move pallets of stock and finished goods using pallet trucks. Quality & Technical Report any technical or production issues to the Team Leader. Carry out product testing accurately and consistently. Ensure products meet all required specifications. Health &...

Electrical Calibration Operator 12 Month Bolton £21.12 rising to £22.12 PAYE (£28.35 rising to £29.70 Umbrella) Role Purpose As a valued member of the Manufacturing function, the Electrical Calibration Operator is responsible for the routine calibration, maintenance, and repair of both Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. This role ensures all test and measurement instruments are compliant with proprietary procedures and company standards to maintain operational traceability.   Key Responsibilities Perform initial and routine calibration, maintenance, and repair of a wide range of electrical test and measurement equipment (e.g., Power Supplies, Multimeters, Oscilloscopes, and Function Generators). Carry out in-service inspection and testing of electrical equipment to ensure safe and reliable operation within the factory environment. Ensure factory-specific and proprietary measuring equipment is maintained strictly in accordance with...

World Class Defence Organisation is currently looking to recruit a Supply Chain Manager subcontractor on an initial 6 month contract.    Rate: £50.00 per hour Location: Stevenage or Bolton, depending on your preference. Hybrid / Remote working: 2 days onsite per week Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Supply Chain Manager Job Description: An opportunity has arisen for a Supply Chain Manager to join ISP in the Equipment's team. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management. As a team, we work across all programmes in a changing environment, managing and implementing both mature and new technologies. Responsibilities /Skillset/experience required: Internal and external assessment skills/knowledge;...

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to...

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 4x Development and Production Test Engineer - Electronics/Electrical subcontractors on an initial 12 month contract.  Looking for somebody with substantial test engineering experience. Diagnosis of test failures Testing experience down to component level The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills.  Hourly Rate: £37.00ph (Umbrella).    Contract Duration: 12 Months (initially and then ongoing and long-term thereafter)   Development and Production Test Engineer – Electronic / Electrical Job Description: Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Provide Test Engineering support during Design / Development phases from initial...

World Class Defence Organisation based in Bolton is currently looking to recruit a Goods Inwards Inspector Subcontractor on an initial 12 month contract.     Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph rising to £29.70ph after 12 weeks (Umbrella).  Overtime: hours worked over 37 hours per week is paid at time and a half.   Goods Inwards Inspector Job Description: The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Plastics / Chemical Operators. Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph.  Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter). Plastics / Chemical Operators Job Description: This involves working with small hand tools and masking tape, manually applying protective resin coatings to assembled circuit boards. Excellent Dexterity is a must have, and any experience working with small brushes, either in their personal time or professional life, would be an excellent skillset. The Plastics operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific...

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract.   This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production...

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract.   Rate: £30.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage onsite Interview Project Officer Job Description: This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established company project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project...

World Class Defence Organisation based in Bolton is currently looking to recruit a General Operative (Microelectronics / Soldering) on an initial 12 month contract.  This position will specifically require experience with strong soldering experience.  Any prior microelectronics experience would be great, i.e. soldering under a microscope.  You will also need experience working within a manufacturing environment. There are 3 positions working on standard days and 1 position working nights.   Hourly Rate: £24.78ph, after 12 weeks the rate increases to £26.12ph.  Overtime hours (over 37 hours) are at normal hourly rate plus 50% Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Job Spec: The General Operator will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet...

World Class Defence Organisation based in Stevenage and Bolton is currently looking to recruit 4x Supplier Quality Engineers.   A strong background of Supplier Quality Engineering / Auditing is required.  Defence, Aerospace or Automotive industries would be great.   Rate: £45.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage or Bolton – depending on your preference   Hybrid / Remote working: The role will likely be 1-2 days per week onsite and the rest working remote Duration: 6 or 12 Months initially with very likely extension. Contracts are often ongoing and long-term thereafter.  IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview   Supplier Quality Engineers Job Description:   An exciting opportunity has arisen for a Supplier Quality auditor to join the Supplier Quality Assurance team, supporting assurance of Mechanical & Electro-Mechanical suppliers   This...