20 engineering jobs found in Winsford

Ambitek is currently recruiting for Skilled Structural MIG Welders to join our client’s team in Winsford. Job Overview: As a Skilled Structural MIG Welder, you will be responsible for MIG welding structural beams and end-plates using solid wire MIG in the down-hand position. Candidates must be capable of performing a 10mm T-joint multi-run fillet weld with a start/stop. Key Responsibilities: * MIG welding of structural beams and end-plates * Perform solid wire MIG welding in the down-hand position * Complete a 10mm T-joint multi-run fillet weld to a high standard * Ensure all welds meet the required quality and safety standards Requirements: * Proven experience in structural MIG welding * Ability to complete a 10mm T-joint multi-run fillet weld with start/stop * Ability to pass a trades test before starting Working Hours: * Monday - Thursday: 7:45am - 4:45pm * Friday: 7:45am - 12:45pm Rates of Pay (CIS or Umbrella): * Basic: £19.85 per hour *...

Job title: Welder Job location: Winsford, Cheshire Hourly pay rate: Days: £17.10 per hour +Overtime Nights: £19.67 per hour. +Overtime Shifts: Days: Monday to Friday 7.30am to 4.30pm with a 3.30pm finish on Friday. Nights: Monday to Thursday, 19:45-06:00 (30 minute lunch break) Hours per week: 41.5 hours plus overtime Start date: ASAP Duration: 6 months Temp to Perm Benefits for you: * 25 days holiday plus bank holidays * Employee Assistance Programme * On-site parking with electric/plug-in charging points * Subsidised onsite canteen * Overtime bonus scheme * Free birthday breakfast, free fruit every day and cake Fridays Role Summary: * You will be responsible for welding assemblies to a high level of quality. * You will be able to read and understand technical drawings and specification sheets and be able to identify weld symbols. * You will be responsible for carrying out precision measurements and accurately marking out. * You must be able to select the correct materials...

Paint Sprayers (days/nights) Winsford £16.44 days / £18.90 nights Contract to permanent role 41.5 hours + any overtime (x1.25/x1.5)   Certain Advantage is partnering with an automotive manufacturer to recruit experienced Paint Sprayers. This role focuses on preparing and finishing commercial vehicles and components to top-quality standards while supporting efficient production and safety practices.   Key Responsibilities: Prepare, prime, and spray vehicle bodies, chassis, and component parts to a high standard of finish. Use single-pack and two-pack paints in line with manufacturer and safety requirements. Meet production schedules by working effectively alone or with others. Follow instructions and maintain a clean, organised, and safe work area. Handle materials responsibly to minimise waste. Support a culture of quality, safety, and continuous improvement. Take on additional duties when required, with suitable training provided.  Your Background: Experience in preparing and...

Ambitek is currently recruiting for experienced Skilled Structural MIG Welders to join our client’s busy fabrication team in Winsford. This is a long-term opportunity offering excellent rates and consistent work for reliable and qualified welders. Key Responsibilities: * MIG welding of structural steel beams and end-plates. * Use of solid wire MIG in the down-hand position. * Perform 10mm T-joint multi-run fillet welds, including start/stop operations. * Work to engineering drawings and welding specifications. * Ensure all welds meet quality and safety standards. Requirements: * Proven experience in structural MIG welding (preferably in a fabrication shop). * Ability to complete a 10mm multi-run T-joint fillet weld to a high standard. * Must pass a trade test prior to starting. * Strong attention to detail and commitment to quality. * Local candidates only – accommodation is not provided....

Ambitek is currently recruiting for Skilled Structural MIG Welders to join our client’s team in Winsford. Job Overview: As a Skilled Structural MIG Welder, you will be responsible for MIG welding structural beams and end-plates using solid wire MIG in the down-hand position. Candidates must be capable of performing a 10mm T-joint multi-run fillet weld with a start/stop. Key Responsibilities: * MIG welding of structural beams and end-plates * Perform solid wire MIG welding in the down-hand position * Complete a 10mm T-joint multi-run fillet weld to a high standard * Ensure all welds meet the required quality and safety standards Requirements: * Proven experience in structural MIG welding * Ability to complete a 10mm T-joint multi-run fillet weld with start/stop * Ability to pass a trades test before starting Working Hours: * Monday - Thursday: 7:45am - 4:45pm * Friday: 7:45am - 12:45pm Rates of Pay (CIS or Umbrella): * Basic: £19.85 per hour *...

Technician Middlewich £14.00 per hour 2x Shift (Earlies/Lates) 6am - 2pm / 2pm - 10pm gap technical are proud to be representing this manufacturing business in their search for an Assistant Engineer / Technician to work at their facility based near Middlewich Performance Objectives The Assistant Engineer will provide both proactive and reactive support for all automated systems on site. You'll be working in a fast-paced environment where your efforts directly impact operational performance, equipment availability, and site productivity. Respond to conveyor system jams and stoppages Reset emergency stop buttons as required Log issues and complete maintenance records using computerised systems Always promote and maintain safe working practices, escalating H&S concerns as needed Support continuous improvement initiatives by reporting recurring issues and suggesting solutions Ensure high availability of equipment to support warehouse operations Conduct routine cleaning of...

THIS ROLE IS LOCATED IN BIRKENHEAD*** Plater – Long-Term Opportunity | Northwest Are you a time-served Plater seeking stable, long-term work with a reputable engineering company? Our client, a leading manufacturer in the Northwest, is expanding their team and looking for skilled platers to join ongoing, high-profile projects. What we’re looking for: * Proven experience in heavy plate fabrication * Previous shipyard or structural fabrication experience is highly advantageous * Ability to work from engineering drawings and maintain high-quality standards What’s on offer: * Long-term, secure work with consistent hours * Excellent overtime opportunities (1.5× Overtime 1 / 2× Overtime 2) * PAYE payment structure * Digs allowance £250 per week - must work 5 days to qualify & 40 miles from site This is a fantastic opportunity to join a respected company known for quality workmanship and ongoing projects across the...

Coachbuilder - nights Certain Advantage is hiring for a Coachbuilder based in the Cheshire area. This role is on a temp-to-perm basis and is site-based. The Company We’re working with a manufacturing business, providing a range of customizable transport solutions for various industry needs. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Coachbuilder—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Specialist bodybuilding Assisting in producing a finished trailer or vehicle body to a high level of quality Various materials, including hardwoods, fibreglass, steel, and aluminium and working from technical drawings.The Individual We’re looking for people who can show: Hands-on manufacturing experience, ideally in commercial vehicle bodywork or trailer...

Coachbuilder - days Certain Advantage is hiring for a Coachbuilder based in the Cheshire area. This role is on a temp-to-perm basis and is site-based. The Company We’re working with a manufacturing business, providing a range of customizable transport solutions for various industry needs. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role? The Role: This role is for a Coachbuilder—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be working in a small, experienced, and collaborative team, and be responsible for: Specialist bodybuilding Assisting in producing a finished trailer or vehicle body to a high level of quality Various materials, including hardwoods, fibreglass, steel, and aluminium and working from technical drawings.The Individual We’re looking for people who can show: Hands-on manufacturing experience, ideally in commercial vehicle bodywork or trailer...

Position Title: Electrical Update Engineer - Flamingo Location: Crewe, Cheshire Contract, Outside IR35, 35 hours per week On-site *Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU.* I am currently recruiting on behalf of a premium automotive manufacturer who are looking for a Electrical Update Engineer to join their team on a long term rolling contract basis. Job description: As a Electrical Update Engineer your main responsibilities are: You will provide a technical lead for scripting, testing and delivering updates packs to the wider business using the automated update tool, Flamingo. Attending the EE-Change Control Board (CCB), liaising with project teams to understand specifics, generating a bespoke test script and confirming suitability to associated baselines and System 42. Liaising with the CP-Tool Manager and highlighting any discrepancies which are found when using D2C2. Generate Beta, and...

Job title: Electrical/HVAC Fitter Job location: Crewe, Cheshire Hourly pay rate: £18.25 PAYE / £23.65 Umbrella Shifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts) Hours per week: 37 Duration: Ongoing Start date: ASAP Industries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV Technicians, HVAC Technicians, Vehicle Technicians, Electricians, Electrical Engineers Company Summary: A global leader in Rolling Stock vehicle manufacturing, service and maintenance. Position Summary: Based within the Rolling Stock industry (Trains) we are currently recruiting for Electrical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Electrical Overhaul of Rail . Candidates will be required to carry out the following duties: * HVAC overhaul, damage repair and engineering * Read schematics and technical drawings * Understanding of electrical components * Carry out electrical builds * Crimping * Brazing experience (Desirable...

LOOKING TO ELEVATE YOUR CAREER INTO ENGINEERING? Are you Mechanical Skilled looking to build your Electrical Skills? Job Title: Mechanical Fitter (Training and Upskilling to Dual Skilled) Job Location: Crewe, Cheshire Shifts: Mon-Fri 8am 4.30pm (With Flexibility to work shifts) Hourly Rate: £16.06 PAYE / £20.79 Umbrella (Training rate - first 6 weeks approx.) £18.25 PAYE / £23.65 Umbrella (Post training) Hours Per Week: 37 Duration: Ongoing Start Date: November/December 2025 Shorterm Group are recruiting for over 40 Mechanical Fitters who are looking to upskill to a Dual Skilled fitter for long term contracts for one of their major clients to carry out mechanical overhaul of Rail Bogies and electrical and wiring overhaul on HVAC systems at the clients Crewe Depot. You DO NOT NEED to have a strong engineering background as other Practical Trade Backgrounds will be...

ELECTRICAL UPDATE ENGINEER – FLAMINGO CREWE – Onsite CONTRACT: OUTSIDE IR35 CONTRACT LENGTH: May 2026 ROLE SUMMARY The Electrical Update Engineer – Flamingo will provide technical leadership in scripting, testing, and delivering vehicle update packs using the Flamingo automated update tool. Acting as the first line of support for all Flamingo-based vehicle update activities, the Electrical Update Engineer – Flamingo will investigate issues, interface with internal engineering teams, and ensure updates are validated, compliant, and delivered effectively. This position requires strong automotive electrical architecture understanding, diagnostic expertise, and experience coding/writing scripts for vehicle systems. ROLE & RESPONSIBILITIES Generate Flamingo update scripts, bespoke test scripts, and update packs based on project requirements Attend change control meetings to obtain update information and liaise with project teams Validate Flamingo updates on allocated fleet...

About this Position: The Diagnostics Engineer (Outside IR35) will lead the creation, testing and delivery of automated vehicle update packs. Acting as the main technical contact for all update-related issues, the role coordinates investigations, ensures system compatibility, and supports regulatory compliance across engineering and vehicle update functions. Job Responsibilities: * Create and validate automated update scripts, working with project teams and control boards to define requirements and ensure baseline compatibility. * Produce test, Beta and Final update packs and conduct validation on fleet vehicles. * Analyse update results, resolve integration issues and support roll-out readiness. * Perform Flamingo traces, support ZDC development and assist engineers with coding and diagnostic issues. * Provide technical support to internal teams and administer Flamingo system access. * Ensure updates meet UNECE and internal compliance...

Join Our Team as a Quality Whole Vehicle Reliability Technical Manager! Are you ready to drive innovation in the automotive industry? Adecco working in partnership with Bentley Motors are searching for a dynamic Quality Whole Vehicle Reliability Technical Manager to join their Infotainment team. This is an exciting opportunity for someone passionate about connected car technology and eager to shape the future of vehicle features and customer experiences. Pay rate: £34.21 PAYE Working pattern: Hybrid - 3 days onsite (Monday & Thurs) Bentley core hours Duration: 31/12/2026 Location: Crewe - Pyms Lane Start date: ASAP What You'll Do: * Analyze and Verify: Dive into pre-series vehicles to evaluate potential customer concerns and provide detailed problem definitions with logs and imagery. * Collaborate: Work closely with the analysis team to report on problems and KPIs, ensuring solutions are verified for effective closure. * Lead and Influence: Use your expertise to influence...

Site Electrical Engineer £19.50 - £25.39 P/h Crewe 5 months work Winner Recruitment are currently working with a global FM service provider who are looking to recruit for an Electrical engineer on a single site within Crewe. This role will be to perform a mixture of Planned & reactive maintenance, & testing. Roles: * As an Electrical Engineer, you will be responsible for carrying out both planned and reactive maintenance across a commercial property * You will work on a variety of electrical systems and equipment, including generators, electrical wiring, emergency lighting, and fire alarm systems, as well as general electrical maintenance tasks. * You will also be involved in performing planned and reactive maintenance across other disciplines * You will ensure that all work is completed in compliance with relevant safety regulations and industry standards. * In this role, you will also collaborate with a multidisciplinary team to help improve overall...

Join Our Team as a DAS Concerns Management Engineer! Are you ready to drive innovation in the automotive industry? Adecco working in partnership with Bentley Motors are searching for a dynamic DAS Concerns Management Engineer to join their Connected Car R&D portfolio planning team. This is an exciting opportunity for someone passionate about connected car technology and eager to shape the future of vehicle features and customer experiences. About the Role: As a key member of the team, you will provide whole vehicle analysis, focusing on the evaluation and testing of pre-series vehicles in both static and dynamic conditions. Your expertise will ensure that our clients receive the highest quality vehicles that meet their expectations. Pay Rate: LTD Max: £35.20 Outside IR35 End Date: 31/01/2026 - likely to extend Working Pattern: Hybrid 3 days a week on site - Wed/Thursday set days Location: Pyms Lane, Crewe, CW1 3PL Further details: International travel involved - at...

Materials Planner Hire basis - fixed term contract or on going temp with potential for temp to perm Salary - up to £36,000pa Location: Crewe Working Hours: 37.5 hrs Monday to Friday, 08.00 - 16.00 hrs (30 minutes unpaid lunch break) Responsible to: Head of Supply Chain & HM Commercial Requirement You must be able to undertake Personal Track Safety Medical - screening and training or Job Description This role will form a key part of the Materials Management Team. Working in a fast paced project environment this role will be responsible for ensuring optimum material availability for Heavy Maintenance projects using relevant tools and with full utilisation of the MRP/ERP system. Key duties Ensure a purchase order requisition is provided for each material purchase and that the correct verification and authorisation, in line with current DFA, has been provided Place required material orders in a timely fashion and in line with purchasing procedure through SAP Track material...

Maintenance Electrician Static site - Crewe - Large Depot. £19.50 PAYE - £25.35 Umbrella Based at a heavy engineering site in Crewe, you will carry out reactive and planned maintenance of building services in line with SFG20. To deliver site based maintenance at the advertised location, and to participate in a call out rota. Full UK driving license required. Ensure that routine PPM (to SFG 20) is carried out to all electrical plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made. These reactive calls to also include concessionary stores and fabric related items. Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times.Must have relevant Electrical qualifications and be prepared to work overtime (paid) and call out --- Fusion People are committed to promoting equal opportunities to...

About this role: We are currently seeking 4 experienced Panel Wirers / Electrical Fitters for a shop floor contract based at the Bentley Automotive Plant in Crewe. This role involves electrical panel wiring, assembly, and fitting work within a busy automotive manufacturing environment. Immediate starts are available for the right candidates. Job Responsibilities: * Wiring and assembling electrical control panels to engineering drawings and schematics * Installing, routing, and terminating cables, looms, and components * Conducting electrical testing and inspection of completed panels * Ensuring all work is completed to high-quality and safety standards * Working collaboratively with other electricians and engineers on the shop floor * Adhering to company and site-specific health and safety procedures Experience Required: * Proven experience as a Panel Wirer or Electrical Fitter within an automotive manufacturing or plant environment * Ability to read and...