304 engineering jobs found in Sudbury

Location: Stafford – Full Time Onsite Contract Length: Until 15 August 2026 IR35 Status: Inside IR35 Pay: £21.52 per hour via Umbrella Key Responsibilities * Perform testing, diagnostics, repair, maintenance, modification, calibration, and manufacture of equipment down to module or component level using approved engineering documentation and techniques. * Carry out planned and ad-hoc advanced repairs using technical documentation, Approved Source Information (ASI) and OEM data. * Support the surveying, refurbishment, and maintenance of Ground Support Equipment (GSE). * Undertake reverse engineering and development activities, including producing engineering documentation and test procedures where required. * Hold responsibilities for self-certification, over-signing, and conditioning of equipment (serviceable, unserviceable, or scrap). * Support the supervision, training, and mentoring of junior technicians and apprentices....

SENIOR ELECTRICAL PROJECT ENGINEERING MANAGER - WEST MIDLANDS *** Senior Electrical Project Engineering Manager required for a contract opportunity within our Renewables and Energy sector for a large BESS project in the West Midlands! LOCATION: West Midlands DURATION: 12 months+ START DATE: April 2026 The right candidate will need to have the following: - Strong Electrical knowledge across ICP/DNO/National Grid works, 132kV - 400kV - Experience of Electrical Design and Installation works, to include switch gear, transformers, cables and BESS systems - Solid understanding of SCADA, security, fire and intruder systems - Excellent BESS Project Management sector experience (15+ years) - Previous evidence of carrying out PC and PD CDM duties and roles - Excellent H&S understanding, good understanding of QA/QC throughout project life cycle - Degree or HND in Electrical/Power Engineering field Competitive day rate, hybrid role across home/office/site locations. If the...

Engineering Document Specialist Location: Leicester (Groby, LE6) Rate: Up to £66.47 per hour Job Type: Contract IR35 Status: Inside IR35 Hours: 37.5 hours per week Overview We are currently recruiting for an experienced Engineering Document Specialist to join a leading engineering organisation based in Leicester. This role will support a key project focused on the revision, rebranding, and release of technical product documentation. This is an excellent opportunity for a technical writer or document specialist with experience in engineering or manufacturing environments. Key Responsibilities Review, update, and rebrand existing product documentation Prepare and release documentation via SAP document control systems Ensure all documentation is accurate, structured, and compliant with company standards Work across multiple projects, managing priorities and deadlines effectively Produce documentation suitable for global use, including multi-language translation...

Job Title: Engineering Technician Location: Greater Manchester Contract: Full-Time, Temporary Rate:£18-21p/h Eden Brown are looking for a Engineering Technician to support in a Further Education College in Greater Manchester. Role Overview: As an Engineering Technician, you will work closely with lecturers and students to set up, maintain, and support practical engineering sessions across a range of disciplines. You will ensure equipment is safe, functional, and ready for use, providing technical expertise and guidance where required. Key Responsibilities: *Prepare and maintain engineering workshop and laboratory equipment. *Support practical sessions, demonstrating safe use of tools and machinery. *Assist staff and students with technical problems and project setups. *Maintain health and safety standards in all practical areas. *Monitor and manage inventory of equipment and materials. Essential Skills & Experience: *Relevant technical...

Position: Mechanical Engineering Lecturer Type: Full-Time, Temporary (Ongoing) Location: Greater Manchester Rate: £40 - £50 per hour Eden Brown are seeking a motivated and experienced lecturer to deliver Mechanical Engineering courses across Level 2 and Level 3 for a leading further education college in Greater Manchester. Job Role: -Deliver engaging and practical lessons in engineering, including CAD, manufacturing support, machining, and maintenance & operations. -Support students on Level 2 Extended Technical Diploma programmes and Level 3 National/Extended Diplomas. -Prepare lesson plans, assessments, and provide timely feedback to students. -Work closely with colleagues to ensure smooth delivery of course content across multiple engineering disciplines. -Monitor and report on student progress, attendance, and engagement. Requirements: - Relevant degree in Mechanical Engerineering or similar -Relevant teaching qualification (PGCE, CertEd, or...

Are you an Engineering Release Specialist looking for your next opportunity? One of the world's largest automotive manufacturers, is currently recruiting for an Engineering Release Specialist, to help them develop unique and innovative vehicles. You will be responsible for the construction, release and maintenance of the Bills of Material. Based in Warwickshire, you will be supporting, a dedicated and multidisciplinary team, on a contract basis. Responsibilities of the Engineering Release Specialist include: * Ensure a timely and accurate BoM is released from Product Engineering to the wider internal and external business * Ensure parts are correctly coded to support scheduling and build * Provide focal point to customers and suppliers at commodity level to ensure accurate & timely BoM release. * Liaise extensively with Engineering and Manufacturing customers and industry partners * Manage workload to support programme timing, key project dates and departmental targets...

Suspension Engineers Certain Advantage is hiring for a Suspension Engineers based in the Warwickshire area. This role is on a contract basis and is site-based. The Company We’re working with a Manufacturing business that blends British craftsmanship with cutting-edge innovation to create luxury vehicles that redefine performance and style. Does this sound like your next career move? If you’re ambitious to grow, this may be your next role. The Role: This role is for a Suspension Engineer—someone ambitious and ready to make an impact. You’ll be results-oriented and driven to succeed. You’ll be leading a small, experienced, and collaborative team, and be responsible for: Complex work in the research and development of suspension engineering systemsThe Individual We’re looking for people who can show: Project environment Working knowledge of product creation & delivery, change control, and change management CAD / CAE design and analysis experience, preferably with Dassault...

Role: CEM (OLE/Lineside Civils) Location: Manchester Job Type: Long Term Ongoing Contact Rate: £(Apply online only)/day Morson Vital have an excellent opportunity for a CEM who has strong working knowledge with OLE and Lineside Civils. About the Role We are seeking an experienced and highly competent OLE & Lineside Civils Contractors Engineering Manager (CEM) to lead engineering assurance and delivery across rail infrastructure projects. This is a key leadership role responsible for ensuring that all Overhead Line Equipment (OLE) and associated civils works are delivered safely, compliantly, and to the highest technical standards. Key Responsibilities/Requirements: 🔺 Act as the Contractors Engineering Manager (CEM) in accordance with rail industry standards. 🔺 Provide engineering leadership across OLE and lineside civils disciplines. 🔺 Ensure all works comply with relevant standards (e.g. Network Rail standards, CDM Regulations). 🔺 Manage and coordinate multi-disciplinary...

Job Title: Mechanical Service Assistant Job Location: Barton-Under-Needwood Hourly Rate: £15.97 PAYE £20.68 Umbrella Shifts: Permanent - Nights Rotating Shift Pattern (Flexibility to work weekends) Hours Per Week: Average 40hrs per week Duration: Long Term Start Date: ASAP Company Summary: Europe's largest Rolling Stock Producer, maintainer and servicing organisation is looking for Mechanical Experienced Engineers to join a well established team at a busy rail depot in the Midlands Position Summary: General engine serving duties, including oil, fuel fitters and hydro static oil to laid down Vehicle Maintenance Instructions (VMI). Operation on Engine and underframe/engine cleaning plant to ensure that trains are cleaned to a standard to allow Maintenance staff to carry out their duties and ensure train safety Daily servicing requirement including oil and...

Job title: Mechanical Fitter - Hydraulics Job location: Burton Hours per week: 40 hours per week Days only Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Duration: 6 months (May go Permanent) Start date: ASAP Client Summary: A global, leading engineering company specialising in the repair and overhaul of heavy engines for the rail industry. Position Summary: We are recruiting a Hydraulics Fitter to support ongoing rail projects at the Burton upon Trent site. This is a bench-based role working as part of a team, stripping and rebuilding mechanical and hydraulic systems on locomotive rafts and transmissions. Roles can include: * Strip down engines, transmissions, and mechanical components for overhaul * Build and rebuild transmissions and raft assemblies within the rail industry * Fit refurbished engines back onto locomotive rafts, including all associated components such as radiators, pumps, tanks, pipework, and electrical looms * Install, repair, and overhaul...

Job title: Mechanical Fitter Job location: Burton on Trent What's in it for you? Excellent Rates On site Parking Excellent, modern work space Potential to go permanent Opportunity to get into the Rail Industry Work with a global company with a huge order book Early Finish every Friday Shifts: Days Hours per week: 40 Duration: 6 months (potential to go permanent) Start date: ASAP Position Summary: The client is looking for experienced mechanical fitter with knowledge of large diesel engines. The role involves dismantling and refurbishing engines and similar equipment used in the rail, marine, and industrial sectors. This is a workshop based role. Duties to include: Stripping down of Mechanical Components (Engine Parts) Removal and refitting of gearboxes / transmissions and hydraulic systems Working from written instructions to complete overhaul activities Candidate Requirements: Ideally NVQ Level 2 or City & Guilds in motor repairs / mechanical fitting or equivalent...

Job Title: Hydraulics Fitter / Mechanical Fitter Location: Burton upon Trent Shift: Days only Hours: 40 hours per week Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Salary: DOE Duration: Contract role, minimum 6 months + may go permanent. Start Date: Immediate Client Overview Our client is a leading manufacturer and front-line supplier of powertrain products across the UK and Ireland. Their areas of expertise include engine overhaul, final drive overhaul, and locomotive refurbishment within the rail sector. Role Overview We are recruiting a Hydraulics Fitter to support ongoing rail projects at the Burton upon Trent site. This is a bench-based role working as part of a team, stripping and rebuilding mechanical and hydraulic systems on locomotive rafts and transmissions. Key Responsibilities * Strip down engines, transmissions, and mechanical components for overhaul * Build and rebuild transmissions and raft assemblies within the rail industry * Fit refurbished...

A leading consultancy firm has an exciting opportunity for a Project Planner to join the business on a contract basis. This will initially start on a 4-month contract, but it has the potential to be extended to 12/24 months. The hourly contract rate would be circa £45 to £50 per hour, inside IR35. Summary: This is an exciting new project for the business, and it requires an experienced Project Planner to join the Projects team. The position will be a hybrid model with 3 days a week in the office, so it will require the individual to be within a commutable distance to the Burton-on-Trent area. Requirements: Experienced Project Planner who must be fully conversant with using MS Projects Consultancy Projects background preferred

Job Title: CSWIP 3.1 Welding Inspector – Process Pipework Location: Burton area Job Summary: We are looking for a certified CSWIP 3.1 Welding Inspector to support quality assurance activities on process pipework projects. The role involves visual inspection of welds to ASME and BS EN standards, borescope examination of internal welds, and oversight of welder qualifications and documentation. Key Responsibilities: * Perform visual welding inspections on process pipework in accordance with ASME and BS EN standards. * Conduct borescope inspections to assess internal weld quality and integrity. * Verify and maintain welder qualifications and ensure compliance with project specifications. * Prepare and manage inspection reports, welding records, and traceability documentation. * Collaborate with welding teams and quality personnel to resolve non-conformances. * Support continuous improvement and ensure adherence to safety and quality procedures. Qualifications &...

We are currently looking for experienced Fabricator/Welders to work for one of our clients in Burton on Trent The client is a market-leading manufacturer of specialist equipment to a range of industry sectors including heavy engineering and aerospace. Due to the specialist nature of the products the work is both interesting and varied and will involve the fabrication of large metal structures, working from engineering drawings, from base materials through to finished product and will include the following:- * Marking out * Metal preparation * Cutting * Bending * Assembly * Welding The work will mostly involve the fabrication of carbon steel and stainless steel and may involve some pipe work as well as plate. The ideal candidates must be experienced Fabricators ideally with some pipefitting experience. The ability to carry out MIG welding to a high standard is essential. Experience of TIG and MMA welding would also be useful. Previous experience of working on the...

We are currently looking for Semi-Skilled/Skilled Mechanical Fitters to work with one of our clients in Burton on Trent The client is a well-established and world leader in the manufacturer of specialist electrical equipment for a variety of applications worldwide Working alongside the client’s own staff the role will include working on the installation of a range of components and will involve all aspects of basic mechanical fitting. The work will be on a day shift basis Applicants must have a proven track record in a similar role and have some previous technical or engineering experience Previous experience of machine building or assembly would be advantageous. This is an ongoing long-term contract for the right candidate. Global Recruitment Services Ltd are a Recruitment Business based in the East Midlands For more information and to apply please email your CV to us

We are currently looking for experienced Panel Wirers to work for of our clients on a temp to perm basis The company is a well-respected world leader in the manufacturer of specialist electrical equipment for a variety of applications worldwide. Based in their workshop near Burton on Trent the work will involve working on the repair and refurbishment of used equipment and the main duties will include all aspects of electrical wiring/assembly ranging from control panels, sub-assemblies/frames through to smaller component installation. The successful applicants have a proven track record in a similar role ideally with a recognised relevant qualification although this is not essential. The ability to read and understand schematic diagrams is essential. Previous experience of machine building or assembly would be advantageous. This is a temp to perm role Global Recruitment Services Ltd are a Recruitment Business based in the East Midlands For more information and to apply please email...

We are currently looking for a Semi-Skilled Fabricator to work for of our clients on a temp to perm basis The company is a well-respected world leader in the manufacturer of specialist electrical equipment for a variety of applications worldwide. Based in their workshop near Burton on Trent this Semi-Skilled Fabricators role will involve working on the repair and manufacture of copper bus bars for a range of uses. The main duties will include * Measuring materials according to requirements * Marking out * Cutting materials to size using specialist machinery and hand tools such as snips * Drilling using both hand and pillar drills The successful applicants for this semi skiled fabricators role will have some experience in basic metal fabrication and be able to read and understand engineering drawings and work instructions. The ability to use basic hand tools and equipment such as metal saws, pillar drills and band saws is essential Excellent prospects for long term work for...

Are you an experienced HGV Class 2 Refuse Driver looking for your next opportunity in Burton on Trent? Join a leading local waste management company where your skills will be valued, and your work will make a positive impact on the community. Enjoy a dynamic and supportive working environment with structured hours and excellent opportunities for career progression. Have you worked for Veolia, Biffa or Suez? Then this could be the perfect role for you! Why Join Us? * Competitive pay: £16.36 per hour, approximately £650 per week based on a 40 hour week! * Career growth: Opportunities to develop your driving and waste management skills * Work-life balance: Monday to Friday shifts with a 06:00am start time * Supportive team: Friendly environment prioritising safety and wellbeing Key Responsibilities: * Safely operate a HGV Class 2 refuse lorry across varied routes, adhering to UK road regulations * Support loaders during rounds by assisting with bin...

We are currently looking for experienced Mechanical Fitters to work for one of our clients in Burton on Trent on a temp to perm basis The client is a market-leading manufacturer of specialist equipment to a range of industry sectors including heavy engineering and aerospace. Due to the specialist nature of the products the work is both interesting and varied and will involve the build and assembly of a wide range of components on large special purpose machinery along with some maintenance work. Working from drawings from base materials through to finished product the main duties of this mechanical fitters role will include the following:- * Assembly of smaller components * Building of sub-assemblies and main product * Preparation of finished product for dispatch * Attending various sites to carry out both installation and maintenance duties The ideal candidates must be experienced Mechanical Fitters, preferable having served a recognised apprenticeship and possess relevant...