43 education jobs found in Huyton

Job Title: Ergonomist Location: Broughton (Onsite) Contract Duration: Until 31/12/2026 (likely to be extended) Hours: 35 hours per week (4.5 days, flexible between 7am-7pm) Pay Rate: Negotiable depending on experience About the Role An exciting opportunity has arisen for an Ergonomist Specialist to join a leading aerospace manufacturing team in Broughton. This role sits within the Manufacturing Engineering department and offers the chance to influence and drive change in an established wing production facility. The ergonomics team is small but highly influential, working closely with operations, design engineering, and health & safety to optimise human working conditions and improve overall system performance. Key Responsibilities As an Ergonomist you will be responsible for conducting ergonomics work analysis of assembly and installation activities and providing recommendations to address any associated risk factors. The role involves developing and implementing...

World Class Defence Organisation based in Bolton is currently looking to recruit a Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella).  Overtime Rates of 'time and a half' for all hours worked over 37 hours per week.   Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product...

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

World Class Defence Organisation based in Bolton is currently looking to recruit a Night Shift Mechanical Fitter on initial 12 month contracts and then ongoing and long-term thereafter.   Mechanical Engineering/Manufacturing qualifications essential. Significant mechanical fitting experience required – the work is at a fine detailed level, so any experience with intricate work would be beneficial.   Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £39.50ph   Night Shift Mechanical Fitters Job Description: The Mechanical Fitter will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base...

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

2 POSITIONS IN LEEDS OFFERING HOURLY RATE OF £28.63 + £575 WEEKLY TRAVEL ALLOWANCE + £1000 3 MONTHLY RETENTION PAYMENT + FREQUENT OVERTIME + ONSITE GYM + ONSITE SUBSIDISED CANTEEN This impressive organisation was recently awarded the Top Employer 2023 status. Since their establishment over 160 years ago, they have become a household name within a number of high-profile industries including Oil & Gas and Power Generation and now employ over 15,000 people across 180 facilities world-wide. Because of heightened workload, this employer is actively searching for a Pipefitter to join their team on a contract basis. Their UK flagship facility is based in LEEDS, just a few miles from the M1 & M62 motorways, meaning that the successful Pipefitter can easily commute from Wakefield, Bradford, Selby, Castleford, Pontefract, Huddersfield, Wetherby and Harrogate. For the Pipefitter position, we are keen to hear from individuals who possess the following: IDEAL NOT ESSENTIAL - Formal...

UMBRELLA PAYE - £37.18 HOURLY RATE / £55.77 OVERTIME RATE + £575.00 WEEKLY TRAVEL ALLOWANCES + £1,000.00 RETENTION PAYMENT EVERY 3 MONTHS. Multiple TIG Pipe Welder vacancies available with a globally operating Engineering organisation based in Leeds, West Yorkshire (within 5 minutes of the M1 and 10 minutes of the M62) This award-winning organisation was recently ranked as one the top 25 Engineering employers world-wide. Since their establishment over 160 years ago, they have become a household name within a number of high-profile industries including Oil & Gas and Power Generation and now employ over 15,000 people across 180 facilities world-wide. For the TIG Pipe Welder position, we are keen to hear from individuals who possess the following: Formal qualifications within a Welding or Fabrication discipline (apprenticeship, NVQ/BTEC/City & Guilds Level 3, HNC, HND etc.) Current or expired codings - 6G preferred Strong & stable experience within a Welding role...

Crane Service Engineer (Contract) – Widnes Location: Widnes, Cheshire Duration: Short‑term contract Team: 4 engineers required Rate: Competitive day rate (DOE) Role Overview We require experienced Rail andCrane Service Engineers to service a 3‑tonne jib crane in a controlled depot environment. The work involves MEWP access, electrical isolation, and strict compliance with permit‑to‑work and safety systems. This is a safety‑critical role requiring disciplined, professional engineers familiar with industrial or depot settings. Engineers will coordinate with site services, security, and nominated persons and must follow agreed RAMS and permits at all times. Key Responsibilities * Service and inspect the jib crane, hoist, and jib arm * Re Cabling and Wifi Installation * Power cable work (rail) * Work at height using a MEWP * Carry out electrical isolation, lock‑off, and test‑for‑dead * Apply Lock Out / Tag Out (one man, one key, one lock) * Work under Permit to Work...

Job Description: Mechanical / Electrical Fitters – Short Term Contract £350 per day | 2 Week Project | Start 5th of May We are currently looking for 3x Mechanical / Electrical Fitters for a short-term contract on a wastewater treatment facility project. This is a hands-on industrial role, suited to experienced operatives comfortable working in demanding site conditions. Role Overview * Dismantling and stripping out mechanical equipment * Work focused on: * Exhaust systems * Cooler banks * Working on older plant machinery (approx. 20 years old) This is a heavy-duty strip-out role, not a clean installation environment. Working Environment * Industrial wastewater treatment site * Exposure to: * Oil, grime, and corrosion * Confined and awkward working areas * Physically demanding work Requirements * Proven experience in mechanical fitting / industrial strip-out work * Background in: * Water treatment / utilities OR * Heavy industrial environments * Must be...

Senior CE&I Engineer - Sellafield Projects Contract | £51-£56/hour (Inside IR35) Warrington | Hybrid - 3 days on site / 2 days remote Are you a Senior Control, Electrical & Instrumentation Engineer looking to apply your expertise within one of the UK's most complex nuclear environments? We are seeking a Senior CE&I Engineer to support a range of engineering and decommissioning projects across the Sellafield programme, delivering robust CE&I design and safety documentation within a highly regulated setting. This role offers the opportunity to contribute to nationally significant nuclear decommissioning work, supporting the delivery of safety-critical systems that underpin long-term hazard reduction at Sellafield. Key Responsibilities Deliver CE&I design work packages across a variety of nuclear engineering and decommissioning projects Produce and check design substantiation, safety documentation, and technical deliverables Provide expert CE&I input...

Job Title: Principal Process Engineer Contract: 12-month contract (Inside IR35) Location: Warrington (site-based / hybrid subject to project needs) Security Clearance: UK Security Check (SC) - must be held or eligible Positions Available: 3 Role Overview We are seeking three highly experienced Principal Process Engineers to support a critical programme within the UK nuclear sector. These roles have been raised as a specific project requirement and will play a key part in the technical delivery, assurance, and development of process engineering solutions associated with RepU management and reuse. The programme relates to the UK's historic and potential future use of reprocessed uranium, including its storage, conversion, re-enrichment, and potential reuse in fresh fuel cycles. Key Responsibilities Provide principal-level process engineering leadership to the project Develop, review, and approve process flowsheets, mass and energy balances, and technical documentation...

Start Your Career as a Trainee Field Service Engineer with Hotpoint Are you ready to launch a hands-on career with one of the UK's most trusted appliance brands? Hotpoint is offering an exciting opportunity to train and qualify as a Trainee Field Service Engineer. No experience? No problem - we'll give you all the training you need to succeed! If you enjoy fixing things, love working with your hands, and want a job where every day is different, this could be the perfect fit for you. About the Role As a Trainee Field Service Engineer, you'll be out on the road, visiting customers' homes to diagnose and repair household appliances. You'll be the friendly face of Hotpoint, helping people get their appliances back up and running. What you'll be doing: Driving your own Hotpoint van to customer appointments Diagnosing and repairing appliances like tumble dryers, electrical cookers, washing machines Providing top-notch customer service Managing your tools and spare parts stock...

SPEN are looking for a Senior Engineer to join them on contract basis, based in Prenton. Role: Senior Engineer Business: Scottish Power Energy Networks Duration: 12 month initial contract Location: Prenton, CH43 3ET Rate: Inside IR35, Umbrella and PAYE options available Role The position of Senior Engineer (Delivery) sits within SP Energy Networks 132kV Projects team delivering our RIIO-ED2 business plan. In this role you will manage personal objectives to ensure the safe and timely delivery of the department work programme including design, planning and construction. Assist in the statutory obligations of the department by developing solutions and work programmes. What you’ll be doing Contribute to the development / delivery of a portfolio of complex capital projects, ensuring safety, environmental compliance, and adherence to budget, quality, and timelines. Drive performance and efficiency by identifying and implementing innovation, value...

Morson are working with the UK's leading aerospace manufacturer and they are looking for a Shopfloor Engineer to join the team In Chester. Tasks Accompany the production team / Autonomous Production Team (APT). Supports in identifying, analysing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM). Provides an E2E perspective at the shopfloor level within the production team / APT. Supports continuous production enablement by efficiently utilising available resources & knowledge Contributes to the Operational Excellence targets within her/his area by adhering to the continuous improvement of operational processes. Support in identifying Non-Conformance on the shopfloor. Skills As the successful candidate you will be able to demonstrate the following skills and competencies: HNC qualification would be desirable Manufacturing engineering experience required Experience working to regulatory requirements and constraints....

Join Our Team as a Desktop Support Engineer - End of Life Workstation! 🌟 Are you ready to step into an exciting role that supports our End-of-Life (EOL) Workstation Coordination team? If you have a knack for problem-solving, a passion for process improvement, and thrive in a dynamic environment, we want to hear from you! 📍 Location: Chester Business Park, Chester (Hybrid) 🕒 Duration: 6 Months What You'll Do: As a Desktop Support Engineer, you will play a crucial role in coordinating activities across hardware and software products as we manage our EOL workstations. Your responsibilities will include: Tracking & Organizing: Assist in the management of remediation efforts and support various stages of the EOL process. Collaborating: Work closely with Project Managers to provide general support and ensure smooth project execution. Improving Processes: Contribute ideas for process enhancements and explore automation opportunities for efficiency gains. Key Responsibilities:...

LOCAL CANDIDATES ONLY, CLIENT NOT SUPPLYING DIGS*** Ambitek are currently recruiting on behalf of our client for an experienced HDPE Pipefitter / Fusion Welder to join an ongoing project in Northwich, supporting the redevelopment of a disused Biomass Plant. Location: Northwich, Cheshire Start Date: Immediate Duration: 3-week trial (with potential for 3–6 months ongoing work) Role Overview This position will focus on the installation and on-site fusion welding of HDPE pipework, working on straight runs installed mainly on pipe bridges. Day-to-Day Duties * Installation of HDPE pipework on site * Fusion welding HDPE lines ranging from 1” up to 10” * Working safely and efficiently to site requirements * Use of HDPE fusion welding machines and associated equipment Requirements * Proven experience in HDPE fusion welding (essential) * Confident using HDPE fusion welding machines * Valid SCATTS or CSCS or CCNSG or EMSS...

Recruit4staff are representing a well-established engineering business in their search for a Fabricator Welder to work in Flint Job Details: Pay: £16.00 - £20.00 per hour Hours of Work: 08:00AM - 4:30PM Duration: Temp To Perm Benefits: Training and progression opportunities, Overtime paid at Time and Half / Double Time Job Role: The Fabricator Welder will work primarily in a busy fabrication shop with occasional site work. Responsibilities include welding and fabricating mild steel components, operating press brakes and guillotines, and performing TIG welding and work with stainless steel when needed. This is a varied and hands-on role for an experienced Fabricator Welder. Essential Skills, Experience, or Qualifications: Fabrication and welding of mild steel MIG Welding Use of press brakes and guillotines Advantageous Skills, Experience, or Qualifications Fabrication and welding of stainless steel Pipe welding and fabrication TIG Welding Must be timeserved to a minimum of NVQ...

Position: Steel Erector / Fitter Location: Southport Hours: Mon-Fri, approx 48hrs/week Start Date: Immediate Duration: 6 weeks PAYE Pay Rates: Mon-Fri, All Hrs: £23.00/hr Including £2.47/hr Holiday Pay The Role: Integrate Engineering Resources are currently recruiting for additional Steel Erectors / Fitters on behalf of our client for a water treatment site near Southport. Duties will include working from drawings, erecting and fitting staircases, landings, pipework, pipe supports etc. There will be 2 weeks in Southport followed by a further 4-6 weeks on another water treatment site in Warrington. Requirements: - CSCS card - IPAF card - NVQ 3 / City & Guilds qualification - Experience of working on water treatment sites an advantage About Us: Integrate Engineering Resources Ltd provides a dedicated recruitment service to the Engineering Construction and Maintenance sectors. Our specialist recruitment activities range across all areas and include the appointment of all levels of...

Technical Support Engineer - Manufacturing Engineering Location: Broughton, Chester (Onsite) Working pattern: Days or Double day shift (20% uplift) Contract type: £30.00/hr PAYE / £40.13/hr Umbrella (Inside IR35) Security clearance: BPSS+ (completed by Airbus Security) About the Technical Support Engineer role Guidant Global is partnering with Airbus to recruit a Technical Shopfloor Engineer to support one of the UK's most advanced aerospace manufacturing environments. This is a hands-on, operational engineering role where you'll work closely with production teams to keep manufacturing moving safely, efficiently and to the highest quality standards. You'll be embedded within the shopfloor environment, acting as a key technical interface between production, engineering and support functions. If you thrive in a fast-paced, problem-solving role and enjoy being close to the action, this is an excellent opportunity to make a real impact. What you'll be doing as a Technical Support...